Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Kinetic strength

A review with ca 500 references has appeared on the stability of cyclodextrin complexes in solution. The principal headings in it are nature of cyclodextrins (CDs) binding equilibria and kinetics strengths of CD complexes structures of CD complexes sources of CD complex stability and prediction of CD stability.168... [Pg.66]

The integral in Eq 10.11 represents the kinetic strength of the thermal cycle with respect to precipitate dissolution. Grong and Shercliff (Ref... [Pg.209]

The kinetic strength may also be used to estimate an equivalent isothermal hold time at the... [Pg.210]

Ap-94 Wacker, A., Drews, J. Pratt, W. B., Lawrent, H., and Petzoldt, K., Z. Natur-forsoh. 20b, 547 (1965). Study of steroid-initiated enzyme induction in Pseudomonas testosteroni with respect to kinetics, strengths of various inducers, and other factors. [Pg.727]

These days, remarkably high-resolution spectra are obtained for positive and negative ions using coaxial-beam spectrometers and various microwave and IR absorption teclmiques as described earlier. Infonnation on molecular bond strengths, isomeric fonus and energetics may also be obtained from the teclmiques discussed earlier. The kinetics of cluster-ion fonuation, as studied in a selected-ion flow tube (SIFT) or by high-pressure... [Pg.813]

In the previous section, non-equilibrium behaviour was discussed, which is observed for particles with a deep minimum in the particle interactions at contact. In this final section, some examples of equilibrium phase behaviour in concentrated colloidal suspensions will be presented. Here we are concerned with purely repulsive particles (hard or soft spheres), or with particles with attractions of moderate strength and range (colloid-polymer and colloid-colloid mixtures). Although we shall focus mainly on equilibrium aspects, a few comments will be made about the associated kinetics as well [69, 70]. [Pg.2685]

The electrons have a range of kinetic energies and are therefore at different temperatures. Depending on the strength of the applied electric field, some electrons in the swarm will have... [Pg.41]

Rigid bones are needed for kinetic motion, support of internal organs, and muscle strength. The bones that compose the human thigh are pound for pound stronger than steel. Nature meets these needs by separating the skeleton into several bones and bone systems, creating joints where the bones intersect. [Pg.185]

Another problem occurs when some fire retardant formulations ate exposed to elevated temperatures (eg, when used as roof tmsses or as roof sheathing) thermal-induced strength reductions can occur in-service. The thermo-chemical factors were discussed by LeVan and Winandy (26), and a kinetic degrade model was developed (27). The treater should be consulted to obtain appropriate in-service modifications for specific fire retardant treatments. [Pg.327]

SolubiHty of carbon dioxide in ethanolamines is affected by temperature, amine solution strength, and carbon dioxide partial pressure. Information on the performance of amines is available in the Hterature and from amine manufacturers. Values for the solubiHty of carbon dioxide and hydrogen sulfide mixtures in monoethanolamine and for the solubiHty of carbon dioxide in diethanolamine are given (36,37). SolubiHty of carbon dioxide in monoethanolamine is provided (38). The effects of catalysts have been studied to improve the activity of amines and provide absorption data for carbon dioxide in both mono- and diethanolamine solutions with and without sodium arsenite as a catalyst (39). Absorption kinetics over a range of contact times for carbon dioxide in monoethanolamine have also been investigated (40). [Pg.22]

The kinetics of reactions cataly2ed by very strong acids are often compHcated. The exact nature of the proton donor species is often not known, and typically the rate of the catalytic reaction does not have a simple dependence on the total concentration of the acid. However, sometimes there is a simple dependence of the catalytic reaction rate on some empirical measure of the acid strength of the solution, such as the Hammett acidity function Hq, which is a measure of the tendency of the solution to donate a proton to a neutral base. Sometimes the rate is proportional to (—log/ig)- Such a dependence may be expected when the slow step in the catalytic cycle is the donation of a proton by the solution to a neutral reactant, ie, base but it is not easy to predict when such a dependence may be found. [Pg.163]

The lack of dependence on ionic strength in the first reaction indicates that it occurs between neutral species. Mono- or dichloramine react much slower than ammonia because of their lower basicities. The reaction is faster with CI2 because it is a stronger electrophile than with HOCl The degree of chlorination increases with decreasing pH and increasing HOCINH mol ratio. Since chlorination rates exceed hydrolysis rates, initial product distribution is deterrnined by formation kinetics. The chloramines hydrolyze very slowly and only to a slight extent and are an example of CAC. [Pg.453]

The electrostatic repulsive forces are a function of particle kinetic energy (/ T), ionic strength, zeta potential, and separation distance. The van der Waals attractive forces are a function of the Hamaker constant and separation distance. [Pg.148]

The law of mass action, the laws of kinetics, and the laws of distillation all operate simultaneously in a process of this type. Esterification can occur only when the concentrations of the acid and alcohol are in excess of equiUbrium values otherwise, hydrolysis must occur. The equations governing the rate of the reaction and the variation of the rate constant (as a function of such variables as temperature, catalyst strength, and proportion of reactants) describe the kinetics of the Hquid-phase reaction. The usual distillation laws must be modified, since most esterifications are somewhat exothermic and reaction is occurring on each plate. Since these kinetic considerations are superimposed on distillation operations, each plate must be treated separately by successive calculations after the extent of conversion has been deterrnined (see Distillation). [Pg.378]

Advantages to Membrane Separation This subsertion covers the commercially important membrane applications. AU except electrodialysis are pressure driven. All except pervaporation involve no phase change. All tend to be inherently low-energy consumers in the-oiy if not in practice. They operate by a different mechanism than do other separation methods, so they have a unique profile of strengths and weaknesses. In some cases they provide unusual sharpness of separation, but in most cases they perform a separation at lower cost, provide more valuable products, and do so with fewer undesirable side effects than older separations methods. The membrane interposes a new phase between feed and product. It controls the transfer of mass between feed and product. It is a kinetic, not an equihbrium process. In a separation, a membrane will be selective because it passes some components much more rapidly than others. Many membranes are veiy selective. Membrane separations are often simpler than the alternatives. [Pg.2024]

Kinetic mles of oxidation of MDASA and TPASA by periodate ions in the weak-acidic medium at the presence of mthenium (VI), iridium (IV), rhodium (III) and their mixtures are investigated by spectrophotometric method. The influence of high temperature treatment with mineral acids of catalysts, concentration of reactants, interfering ions, temperature and ionic strength of solutions on the rate of reactions was investigated. Optimal conditions of indicator reactions, rate constants and energy of activation for arylamine oxidation reactions at the presence of individual catalysts are determined. [Pg.37]


See other pages where Kinetic strength is mentioned: [Pg.142]    [Pg.155]    [Pg.209]    [Pg.210]    [Pg.203]    [Pg.151]    [Pg.142]    [Pg.155]    [Pg.209]    [Pg.210]    [Pg.203]    [Pg.151]    [Pg.738]    [Pg.813]    [Pg.1318]    [Pg.2]    [Pg.158]    [Pg.126]    [Pg.38]    [Pg.225]    [Pg.387]    [Pg.579]    [Pg.151]    [Pg.202]    [Pg.382]    [Pg.451]    [Pg.77]    [Pg.83]    [Pg.518]    [Pg.541]    [Pg.319]    [Pg.319]    [Pg.1882]    [Pg.283]    [Pg.22]    [Pg.228]    [Pg.321]   
See also in sourсe #XX -- [ Pg.273 ]




SEARCH



First-order kinetics, strength loss

Strength kinetics

Variable-ionic-strength kinetic

Variable-ionic-strength kinetic experiments

© 2024 chempedia.info