Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Ketones 1.6- dicarbonyls, synthesis

One published synthesis uses nitrile (38) for synthon (36) and the first step is essentially a 1,3-dicarbonyl synthesis. Removal of the cyanide by decarboxylation gives (34). Protection of the ketone is necessary for the condensation but not for the reduction if this is kept to the end after the furan is formed, llynthssis ... [Pg.336]

The most general methods for the syntheses of 1,2-difunctional molecules are based on the oxidation of carbon-carbon multiple bonds (p. 117) and the opening of oxiranes by hetero atoms (p. 123fl.). There exist, however, also a few useful reactions in which an a - and a d -synthon or two r -synthons are combined. The classical polar reaction is the addition of cyanide anion to carbonyl groups, which leads to a-hydroxynitriles (cyanohydrins). It is used, for example, in Strecker s synthesis of amino acids and in the homologization of monosaccharides. The ff-hydroxy group of a nitrile can be easily substituted by various nucleophiles, the nitrile can be solvolyzed or reduced. Therefore a large variety of terminal difunctional molecules with one additional carbon atom can be made. Equally versatile are a-methylsulfinyl ketones (H.G. Hauthal, 1971 T. Durst, 1979 O. DeLucchi, 1991), which are available from acid chlorides or esters and the dimsyl anion. Carbanions of these compounds can also be used for the synthesis of 1,4-dicarbonyl compounds (p. 65f.). [Pg.50]

Synthesis and Properties. A number of monomers have been used to prepare PQs and PPQs, including aromatic bis((9-diamines) and tetramines, aromatic bis(a-dicarbonyl) monomers (bisglyoxals), bis(phenyl-a-diketones) and a-ketones, bis(phenyl-a-diketones) containing amide, imide, and ester groups between the a-diketones. Significant problems encountered are that the tetraamines are carcinogenic, difficult to purify, and have poor stabihty, and the bisglyoxals require an arduous synthesis. [Pg.536]

The Gewald aminothiophene synthesis involves the condensation of aldehydes, ketones, or 1,3-dicarbonyl compounds 1 with activated nitriles such as malononitrile or cyanoacetic esters 2 and elemental sulfur in the presence of an amine to afford the corresponding 2-aminothiophene 3. ... [Pg.193]

On the other hand, the enantioselective 1,4-addition of carbanions such as enolates to linear enones is an interesting challenge, since relatively few efficient methods exist for these transformations. The Michael reaction of p-dicarbonyl compounds with a,p-unsaturated ketones can be catalysed by a number of transition-metal compounds. The asymmetric version of this reaction has been performed using chiral diol, diamine, and diphosphine ligands. In the past few years, bidentate and polydentate thioethers have begun to be considered as chiral ligands for this reaction. As an example, Christoffers et al. have developed the synthesis of several S/O-bidentate and S/O/S-tridentate thioether... [Pg.97]

The preparation of ketones and ester from (3-dicarbonyl enolates has largely been supplanted by procedures based on selective enolate formation. These procedures permit direct alkylation of ketone and ester enolates and avoid the hydrolysis and decarboxylation of keto ester intermediates. The development of conditions for stoichiometric formation of both kinetically and thermodynamically controlled enolates has permitted the extensive use of enolate alkylation reactions in multistep synthesis of complex molecules. One aspect of the alkylation reaction that is crucial in many cases is the stereoselectivity. The alkylation has a stereoelectronic preference for approach of the electrophile perpendicular to the plane of the enolate, because the tt electrons are involved in bond formation. A major factor in determining the stereoselectivity of ketone enolate alkylations is the difference in steric hindrance on the two faces of the enolate. The electrophile approaches from the less hindered of the two faces and the degree of stereoselectivity depends on the steric differentiation. Numerous examples of such effects have been observed.51 In ketone and ester enolates that are exocyclic to a conformationally biased cyclohexane ring there is a small preference for... [Pg.24]

The nitro group can be converted to a ketone by hydrolysis of the nitronate anion, permitting the synthesis of 1,4-dicarbonyl compounds. [Pg.189]

The enol ethers of P-dicarbonyl compounds are reduced to a, 3-unsaturated ketones by LiAlH4, followed by hydrolysis.115 Reduction stops at the allylic alcohol, but subsequent acid hydrolysis of the enol ether and dehydration leads to the isolated product. This reaction is a useful method for synthesis of substituted cyclohexenones. [Pg.407]

Cyclocondensation processes of p-dicarbonyl derivatives or their analogues are still widely employed for the synthesis of new isoxazoles. Non-proteinogenic heterocyclic substituted ct-amino acids have been synthesised using the alkynyl ketone functionality as a versatile building block ynone 2, derived from protected L-aspartic acid 1, reacted with hydroxylamine hydrochloride affording the isoxazole 3 with enantiomeric purity greater than 98% ee <00 JCS(P 1 )2311 >. [Pg.217]

Simple reactivity inversion" implies using an umpoled synthon whose origin has, in principle, nothing in common with the synthon with "unnatural" polarity. An example of this type of reactivity inversion is found in one of the possible synthesis of cw-jasmone (3) in which the nitroethane (4) is used as an equivalent of an "acetyl anion" and reacts with an a,P-unsaturated ketone to give the corresponding 1,4-bifunctional system which can then be transformed by a Nef-type reaction into the dissonant 1,4-dicarbonyl system [5]. An intramolecular aldol condensation finally affords the target molecule (Scheme 5.3). [Pg.113]

Our own group is also involved in the development of domino multicomponent reactions for the synthesis of heterocycles of both pharmacologic and synthetic interest [156]. In particular, we recently reported a totally regioselective and metal-free Michael addition-initiated three-component substrate directed route to polysubstituted pyridines from 1,3-dicarbonyls. Thus, the direct condensation of 1,3-diketones, (3-ketoesters, or p-ketoamides with a,p-unsaturated aldehydes or ketones with a synthetic equivalent of ammonia, under heterogeneous catalysis by 4 A molecular sieves, provided the desired heterocycles after in situ oxidation (Scheme 56) [157]. A mechanistic study demonstrated that the first step of the sequence was a molecular sieves-promoted Michael addition between the 1,3-dicarbonyl and the cx,p-unsaturated carbonyl compound. The corresponding 1,5-dicarbonyl adduct then reacts with the ammonia source leading to a DHP derivative, which is spontaneously converted to the aromatized product. [Pg.262]

Oxo esters undergo an intramolecular dicarbonyl coupling reaction on treatment with a low-valent titanium reagent to form a ketone. This was used in the synthesis of (Z)-7,l0,10-trimethyl-bicyclo[7.2.0]undec-6-en-2-one (4) from ethyl ( )-6-methyl-7-(4,4-dimethyl-2-oxocyclobutyl)-hept-5-enoate,108 Interestingly, the configuration of the isolated C -C double bond in the isolated product is sensitive to the reaction conditions. [Pg.412]

The competition between Michael addition of a,(3-unsaturated ketones and Diels-Alder reactions involving furan and 2-methylfuran is affected by the catalyst used. Methyl vinyl ketone gives the alkylation product with furan and 2-methylfuran in the presence of silica gel (88TL175). Bis(alkylated) products have also been obtained in reactions of 2-methylene-1,3-dicarbonyl compounds (90H(31)1699). An intramolecular proton catalyzed alkylation reaction of an a,(3-unsaturated ketone provided a straightforward synthesis of norpinguisone (90TL4343) and in the example shown in Equation (4) the cyclization reaction involved an a,(3-y,8-dienone (94TL4887). [Pg.313]

Ilac Knorr pyrrole synthesis from a-amino ketones and /3-dicarbonyl compounds 3.06.3.4.1... [Pg.315]

An important pyrrole synthesis, known as the Knorr synthesis, is of the cyclizative condensation type. An a -amino ketone furnishes a nucleophilic nitrogen and an electrophilic carbonyl, while the second component, a /3-keto ester or similar /3-dicarbonyl compound, furnishes an electrophilic carbonyl and a nucleophilic carbon. The initial combination involves enamine formation between the primary amine and the dicarbonyl compound. Subsequent cyclization occurs as a result of the nucleophilic jg-carbon of the enamine adding to the electrophilic carbonyl group of the a-amino ketone (equation 76). Since a-amino... [Pg.331]

Dimethylaminonitroethylene is prepared from the anion of nitromethane and the salt prepaffed from dimethylformamide and dimethyl sulfate. The condensation step is general for other types of active methylene compounds, indicating further potential for pyrrole synthesis. A related process involves the condensation of ketones with the moao-N,N-dimethylhydrazone of glyoxal base-catalyzed condensation affords the hydrazones of a conjugated 1,4-dicarbonyl system, and sodium thiosulfate reduction then affords 2,3-disubstituted pyrroles (equation 85) (77CB491). [Pg.334]

Several significant pyrrole syntheses involve the formal tricomponent cyclization of type III ace (equation 126). The Hantzsch pyrrole synthesis involves a dicarbonyl compound, an a -halo ketone and ammonia or an amine. The mechanistic pattern is similar to that involved in the Knorr synthesis (Section 3.06.3.4.1). In addition to a-halo ketones and a-haloal-dehydes, compounds such as 1,2-dichloroethyl acetate, 1,2-dibromoethyl acetate and 1,2-dichloroethyl ethyl ether can serve as a -haloaldehyde equivalents (equation 127) (70CJC1689, 70JCS(C)285>. It is believed that the initial step in these reactions is the formation of a stabilized enamine from the amine and the /3 -dicarbonyl compound. A structural ambiguity... [Pg.344]

The intermediate 1,5-dicarbonyl compounds of type 24 (Scheme 1) can be constructed not only on the basis of meta-alkoxy-substituted benzyl ketones (C4 + Ci synthesis, Section II,C), but also under definite conditions starting from aryl ketones (C2 + C3 synthesis). Thus, in a molecule of acylveratrole derivatives of type 79, the excess of 7r-electron density due to the presence of two ortho-methoxy groups allows such compounds to be involved in electrophilic substitutions with benzoin (73URP2 74KGS1575). [Pg.176]

Unsaturated 1,5-dicarbonyl compounds. The phenylthioalkylation of silyl enol ethers of carbonyl compounds (9, 521-522) can be extended to the synthesis of unsaturated 1,5-dicarbonyl compounds. In a typical reaction the enol silyl ether of a ketone is alkylated with the unsaturated chloride 1 under ZnBr2 catalysis to give a homoallyl sulfide. Ozonolysis of the methylene group is accompanied by oxidation of the phenylthio group sulfoxide elimination results in an unsaturated 1,5-aldehydo ketone (equation I). Alkylation with 2 results in a methyl ketone (equation II). [Pg.643]

The decarboxymethylation of substituted o -hydroxy-o -carbomethoxy hexacyclic substituted ketones (43), one of these used as an advanced intermediate in the synthesis of the alkaloid aspidophytine, can be effected by heating with Mgl2 in CH3CN in good yields (75-84%) (Scheme 12).34 The reaction was shown to proceed through a novel a-hydroxy /3-dicarbonyl to a-ketol ester rearrangement mechanism, which is supported by the isolation of the carbonate (45) intermediate. [Pg.461]

Synthesis of dihydropyridines through preliminary transformation of unsaturated ketones into 1,5-dicarbonyl compounds (Scheme 3.1, reaction a— variant of Hantzch synthesis)... [Pg.61]

The use of aryl-A3-iodanes for C-heteroatom bond formation at the a-carbon atoms of ketones and / -dicarbonyl compounds, and related transformations of silyl enol ethers and silyl ketene acetals, has been exhaustively summarized in recent reviews (Scheme 27) [5,8]. Reactions of this type are especially useful for the introduction of oxygen ligands (e. g., L2 = OH, OR, OCOR, 0S02R, OPO(OR)2), and have been extensively utilized for the synthesis of a-sulfonyl-oxy ketones and a-hydroxy dimethyl ketals. [Pg.149]


See other pages where Ketones 1.6- dicarbonyls, synthesis is mentioned: [Pg.148]    [Pg.248]    [Pg.32]    [Pg.157]    [Pg.111]    [Pg.139]    [Pg.361]    [Pg.362]    [Pg.115]    [Pg.387]    [Pg.42]    [Pg.264]    [Pg.75]    [Pg.195]    [Pg.162]    [Pg.83]    [Pg.397]    [Pg.574]    [Pg.772]    [Pg.359]    [Pg.332]    [Pg.772]    [Pg.1046]    [Pg.248]    [Pg.67]   
See also in sourсe #XX -- [ Pg.173 ]




SEARCH



1.3- Dicarbonyls Synthesis

Ketone synthesis

Ketones 1.3- dicarbonyls

© 2024 chempedia.info