Iron complexes stability constants

Electrochemical experiments allow the determination of complex stability constants for Fe2+ by measuring complex redox potentials over a range of pH values. The Fe34YFe2+ redox potential of the siderophore complex, as with the spectral characteristics of the complex, is dependent on the inner coordination environment of the iron. These considerations will be addressed later (Section III.D). 

Amine-extraction equilibria can also be modeled by chemical-reaction equilibrium constants. Figure 8.3-3 indicates that cations such as iron(IIl), zinc, cobelt(ll) and coppeifU) exhibit high distribution coefficients with chloride solutions, wherese nickel. iron(II), and manganese are not extracted to any great extent. The besis for the differences in distribution coefficients lies mainly in the tendency for the former group of cations to fonn chloride complexes. Stability constants for these complexes are available in the literature,11 and they can be used to develop quantitative phase-equilibrium models. 

The extent of hydrolysis of (MY)(n 4)+ depends upon the characteristics of the metal ion, and is largely controlled by the solubility product of the metallic hydroxide and, of course, the stability constant of the complex. Thus iron(III) is precipitated as hydroxide (Ksal = 1 x 10 36) in basic solution, but nickel(II), for which the relevant solubility product is 6.5 x 10 l8, remains complexed. Clearly the use of excess EDTA will tend to reduce the effect of hydrolysis in basic solutions. It follows that for each metal ion there exists an optimum pH which will give rise to a maximum value for the apparent stability constant. 

Variamine blue (C.I. 37255). The end point in an EDTA titration may sometimes be detected by changes in redox potential, and hence by the use of appropriate redox indicators. An excellent example is variamine blue (4-methoxy-4 -aminodiphenylamine), which may be employed in the complexometric titration of iron(III). When a mixture of iron(II) and (III) is titrated with EDTA the latter disappears first. As soon as an amount of the complexing agent equivalent to the concentration of iron(III) has been added, pFe(III) increases abruptly and consequently there is a sudden decrease in the redox potential (compare Section 2.33) the end point can therefore be detected either potentiometrically or with a redox indicator (10.91). The stability constant of the iron(III) complex FeY- (EDTA = Na2H2Y) is about 1025 and that of the iron(II) complex FeY2 - is 1014 approximate calculations show that the change of redox potential is about 600 millivolts at pH = 2 and that this will be almost independent of the concentration of iron(II) present. The jump in redox potential will also be obtained if no iron(II) salt is actually added, since the extremely minute amount of iron(II) necessary is always present in any pure iron(III) salt. 

Discussion. Salicylic acid and iron(III) ions form a deep-coloured complex with a maximum absorption at about 525 nm this complex is used as the basis for the photometric titration of iron(III) ion with standard EDTA solution. At a pH of ca 2.4 the EDTA-iron complex is much more stable (higher stability constant) than the iron-salicylic acid complex. In the titration of an iron-salicylic acid solution with EDTA the iron-salicylic acid colour will therefore gradually disappear as the end point is approached. The spectrophotometric end point at 525 nm is very sharp. 

Mapsi et al. [16] reported the use of a potentiometric method for the determination of the stability constants of miconazole complexes with iron(II), iron(III), cobalt(II), nickel(II), copper(II), and zinc(II) ions. The interaction of miconazole with the ions was determined potentiometrically in methanol-water (90 10) at an ionic force of 0.16 and at 20 °C. The coordination number of iron, cobalt, and nickel was 6 copper and zinc show a coordination number of 4. The values of the respected log jSn of these complexes were calculated by an improved Scatchard (1949) method and they are in agreement with the Irving-Williams (1953) series of Fe2+ < Co2+ < Ni2 < Cu2+ < Zn2+. 

Willems et al. [37] used a polarographic method to study the miconazole complexes of some trace elements. Manganese, iron, cobalt, and zinc element formed miconazole complexes with different stability constants. Polarography was used for detecting stability constants. The evolution of the respective formation constants followed the natural (Irving-Williams) order. The stepwise constant of the complexes formed increased from manganese to cobalt and decreased for zinc. The results are discussed with respect to the possible mechanism of action of miconazole. 

This means that the sequestration equilibrium reaction will be pH-dependent. The constant K is known as the conditional equilibrium constant. However, for stability comparisons between complexes of the same denticity, it may be more convenient to compare the equilibrium constant for the proton independent reaction between iron and siderophore. This can also be useful in a theoretical sense, as it allows comparison of complex stability where siderophores have different protonation constants. However, this approach does not account for competition between H+ and Fe3+ for binding, which is always present in a real situation in aqueous solution. 

Thermodynamic Stability Constants for Iron(III)-Siderophore Complexes,... 

In Eq. (45), KFe(II)L is the stability constant for iron(II) complexation by the competing ligand, KFe(II)sid the stability constant for the complex formed between iron(II) and the siderophore, n the number of electrons transferred, Erxn the observed redox potential for the iron(III)-siderophore system coupled with iron(II) chelation, and EFJ m sld the redox potential of the iron(III)-siderophore complex. 

The most controversial issue is the number and exact stoichiometries of the iron(III)-sulfito complexes formed under different experimental conditions. Earlier, van Eldik and co-workers reported the formation of a series of [Fe(SO ) ]3-2" (n = to 3) complexes and the [Fe(S03)(0H)] complex (89,91,92). The stability constants of these species were determined by evaluating time resolved rapid-scan spectra obtained from the sub-second to several minutes time domain. The cis-trans isomerization of the complexes was also considered, under feasible circumstances. In contrast, Betterton interpreted his results assuming the formation and linkage isomerization of a single complex, [Fe(SC>3)]+ (93). In agreement with the latter results, Conklin and Hoffmann also found evidence only for the formation of a mono-complex (94). However, their results were criticized on the basis that the experiments were made in 1.0 M formic acid/formate buffer where iron(III) existed mainly as formato complex(es). Although these reactions could interfere with the formation of the sulfito complex, they were not considered in the evaluation of the results (95). Finally, van Eldik and co-workers re-examined the complex-formation reactions and presented additional data in support of... 

---