Iron complexes acyl formation

The lithium enolate 2a (M = Li ) prepared from the iron propanoyl complex 1 reacts with symmetrical ketones to produce the diastercomers 3 and 4 with moderate selectivity for diastereomer 3. The yields of the aldol adducts are poor deprotonation of the substrate ketone is reported to be the dominant reaction pathway45. However, transmetalation of the lithium enolate 2a by treatment with one equivalent of copper cyanide at —40 C generates the copper enolate 2b (M = Cu ) which reacts with symmetrical ketones at — 78 °C to selectively produce diastereomer 3 in good yield. Diastereomeric ratios in excess of 92 8 are reported with efficient stereoselection requiring the addition of exactly one equivalent of copper cyanide at the transmetalation step45. Small amounts of triphcnylphosphane, a common trace impurity remaining from the preparation of these iron-acyl complexes, appear to suppress formation of the copper enolate. Thus, the starting iron complex must be carefully purified. 

Iron(II) alkyl anions fFe(Por)R (R = Me, t-Bu) do not insert CO directly, but do upon one-electron oxidation to Fe(Por)R to give the acyl species Fe(Por)C(0)R, which can in turn be reduced to the iron(II) acyl Fe(Por)C(0)R]. This process competes with homolysis of Fe(Por)R, and the resulting iron(II) porphyrin is stabilized by formation of the carbonyl complex Fe(Por)(CO). Benzyl and phenyl iron(III) complexes do not insert CO, with the former undergoing decomposition and the latter forming a six-coordinate adduct, [Fe(Por)(Ph)(CO) upon reduction to iron(ll). The failure of Fe(Por)Ph to insert CO was attributed to the stronger Fe—C bond in the aryl complexes. The electrochemistry of the iron(lll) acyl complexes Fe(Por)C(0)R was investigated as part of this study, and showed two reversible reductions (to Fe(ll) and Fe(l) acyl complexes, formally) and one irreversible oxidation process."" ... 

A viable iron carbonyl-mediated reduction process converts acid chlorides and bromoalkanes into aldehydes [3, 6]. Yields are high, with the exception of nitro-benzoyl chloride, and the procedure is generally applicable for the synthesis of alkyl, aryl and a,(i-unsaturated aldehydes from the acid chlorides. The reduction proceeds via the initial formation of the acyl iron complex, followed by hydride transfer and extrusion of the aldehyde (cf. Chapter 8). 

The first step of peroxidase catalysis involves binding of the peroxide, usually H2C>2, to the heme iron atom to produce a ferric hydroperoxide intermediate [Fe(IE)-OOH]. Kinetic data identify an intermediate prior to Compound I whose formation can be saturated at higher peroxide concentrations. This elusive intermediate, labeled Compound 0, was first observed by Back and Van Wart in the reaction of HRP with H2O2 [14]. They reported that it had absorption maxima at 330 and 410 nm and assigned these spectral properties to the ferric hydroperoxide species [Fe(III)-OOH]. They subsequently detected transient intermediates with similar spectra in the reactions of HRP with alkyl and acyl peroxides [15]. However, other studies questioned whether the species with a split Soret absorption detected by Back and Van Wart was actually the ferric hydroperoxide [16-18], Computational prediction of the spectrum expected for Compound 0 supported the structure proposed by Baek and Van Wart for their intermediate, whereas intermediates observed by others with a conventional, unsplit Soret band may be complexes of ferric HRP with undeprotonated H2O2, that is [Fe(III)-HOOH] [19]. Furthermore, computational analysis of the peroxidase catalytic sequence suggests that the formation of Compound 0 is preceded by formation of an intermediate in which the undeprotonated peroxide is coordinated to the heme iron [20], Indeed, formation of the [Fe(III)-HOOH] complex may be required to make the peroxide sufficiently acidic to be deprotonated by the distal histidine residue in the peroxidase active site [21],... 

The chemistry of iron vinylidene complexes is dominated by the electrophilicity of the carbon atom adjacent to the iron organometallic unit. While addition of water leads to an acyl complex (i.e., the reverse of the dehydration shown in equation 10), addition of an alcohol leads to a vinyl ether complex. Similarly, other iron vinyl complexes can be prepared by the addition of thiolate, hydride, or an organocuprate (Scheme 33). " The nucleophilic addition of imines gave enaminoiron intermediates that could be further elaborated into cyclic aminocarbenes. This methodology has been used to provide access to /3-lactams and ultimately penicillin analogs, and good diastereoselectivities were observed (6 1-15 1) (Scheme 34). 04 Iso, vinylidene complexes are intermediates in cyclizations of alkynyl irons with substituted ketenes, acid chlorides, and related electrophiles an example is shown (equation 11). These cyclizations led to the formation of a series of isolable and characterizable cyclic vinyl iron complexes. 

Treatment of a-alkoxy-substituted iron acyl complexes 20 with bromine in the presence of an alcohol produces free acetals 22 with loss of stereochemistry at the center derived from the a-carbon of the starting complexl2,49. Electron donation from the alkoxy group allows formation of the oxonium intermediate 21, which is captured by the alcohol to generate the product acetal. 

Treatment of lithium enolate species, such as 7, with a variety of metal halide species produces enolates with different reactivities in particular, diethylaluminum(IH) and copper(I) species have been found to profoundly alter stereodifferentiation in reactions of iron acyl enolates (see Section D.1.3.4.2.5.1.). It has not been established whether complex formation or discrete ti ansmetalation occurs usually, a temperature increase from — 78 °C to — 42 °C is required for maximum effect, suggesting that cation exchange is responsible. In some cases, such additives exert an influence at —78 °C13, and this has been attributed to simple Lewis acid-type interactions with the substrate instead of transmetalation of the enolate species. For simplicity, when such additives are allowed to react with enolate species at temperatures of — 42 =C and above prior to the addition of other reagents, the process shall be referred to as transmetalation. 

The porphyrin-iron(III)-peroxo complex [Fe(TPP)02] (163) was prepared by the reaction of K02 with Fen(TPP) in the presence of a crown ether, and characterized by spectroscopic methods [p(0—O) = 806 cm-1]542. This peroxo complex (163) was found to be inactive toward hydrocarbons. However, addition of excess acetic anhydride to (163) dissolved in a benzene-cyclohexane mixture results in the formation of cyclohexanol and cyclohexanone. This reaction is thought to proceed via acylation of the peroxo group, giving iron percarboxylate (164), which decomposes to an Fev-oxo compound (165) capable of hydroxylating alkanes.543 Such a mechanism has been suggested for the hydroxylation of camphor by Pseudomonas cytochrome P-450.544... 

Reactions of acyclic derivatives with carbon electrophiles have also been examined.33,34 An illustrative reaction involving methylation of the unsubstituted complex [MnCr 4-butadiene)(CO)3], (19), is shown in Scheme 16. Again, the reaction is presumed to occur via a methylmanganese species (20) and after methyl migration the unsaturated metal center is stabilized by formation of a Mn—H—C bridge (isomers 21a and 21b). Deprotonation of equilibrating (21a and 21b) yields the [Mn(l-methylbutadiene)(CO>3]-complex (22), which has exclusively trans stereochemistry.34 This sequence represents alkylation of the terminal carbon of butadiene and complements the iron carbonyl chemistry, where terminal acylation has been achieved as described above. Unpublished results indicate that a second methylation of (22) occurs... 

Treatment of some iron-acyl complexes with trifluoromethanesul-phonic anhydride (TfzO) affords vinylidene derivatives directly (5 7,38). The reaction is envisaged as a nucleophilic attack on TfzO by the acyl, followed by deprotonation to the vinyl ether complex. A combination of an excellent leaving group (TfO-) with a good electron-releasing substituent on the same carbon atom facilitates the subsequent formation of the vinylidene ... 

Gibson nde Thomas, and Tustin have reported the formation of a number of iron carbonyl complexes of a,/J-unsaturated acyl silanes226. Propenoyl trimethylsilane did not give a stable complex, but the iron tricarbonyl complexes of cinnamoyl silanes were very stable. 

Water also attacks the electrophilic a carbon of the ruthenium vi-nylidene complex 80. The reaction does not yield the ruthenium acyl complex, however, as is found for the reaction with the similar iron vinylidene complex [(i75-C5H5)(CO)2Fe=C=CHPh]+ (56), but rather 91 is the only isolated product (78). The mechanism for this transformation most reasonably involves rapid loss of H+ from the initially formed hydroxycarbene to generate an intermediate acyl complex (90). Reversible loss of triphenyl-phosphine relieves steric strain at the congested ruthenium center, and eventual irreversible migration of the benzyl fragment to the metal leads to formation of the more stable carbonyl complex (91) [Eq. (86)]. 

It was determined that carbon nucleophiles derived from carbon acids with p/fa > 22 or so are sufficiently reactive to combine with the diene ligand rapidly at —78°C to produce an anionic intermediate (Scheme 25). With a few exceptions, the regioselectivity favors formation of the homoallyl anionic complex from addition at C-2, by kinetic control. This intermediate can be quenched with protons to give the terminal alkene, or can react with excess CO to produce an acyl iron intermediate. Following the recipes of Collman s reaction, the acyl iron intermediate can lead to methyl ketones, aldehydes, or carboxylic acids. The processes are illustrated with the 1,3-cyclohexadiene complex (Scheme 25). ... 

By reaction of cationic carbonyl complexes with lithium carbanions, neutral acyl complexes are prepared. Whereas treatment of [> -CpFe(CO)3]BF4 with (a) PhLi gives the expected > -CpFe(CO)2 [C(0)Ph] in 80% yield, with (b) MeLi only traces of > -CpFe(CO)2 [C(0)Me] can be detected . This complex and other phosphane-substituted acyl compounds of the type f -CpM(CO)L[C(0)Me] [M = Fe, Ru L = CO, PPh3, P(hex)j], as well as >/ -CpMo(CO)2P(hex)3[C(0)Me] (prepared by different routes), are protonated with and alkylated with [R3 0]BF4 reversibly, yielding cationic hydroxy- and alkoxy(methyl)carbene complexes, respectively . The formation of the ( + )- and ( —)-acetyl complex / -CpFe(C0)(PPh3)[C(0)Me] from the ( + )-and ( —)-conformers of optically active > -CpFe(C0XPPh3)[C(0)0-menthyl] and MeLi occurs with inversion of configuration at the asymmetric iron atom . 

Figure 2. Formation of ferryl iron in initiation and catalysis of lipid oxidation Reaction schemes lor formation of hypervalent iron states by FeF and Fe complexes and subsequent reactions leading to radicals that can initiate lipid oxidation. L, metal ligand R, alkyl or acyl group. Fe + sequence (71, 73) Fe sequence (81), adapted.

---