Ionic polymer-metal composites fabrication

Siripong, M., Fredholm, S., Nguyen, Q., Shih, B., Itescu, J. and Stolk, J. (2006). A cost-effective fabrication method for ionic polymer-metal composites, in V. Bharti, Y. Bar-Cohen, Z. Cheng, Q. Zhang and J. Madden (eds.). Elec-... [Pg.283]

Another study reports on the fabrication of an ionic polymer-metal composite membrane actuator in cantilever beam geometry that can perform an extensive bending movement (more than 100°) and that can remain curled up under constant voltage (Dai et al. 2009). [Pg.65]

Fang, B.K., Ju, M.S., Lin, C.K. (2007) A new approach to develop ionic polymer-metal composites (IPMC) actuator Fabrication and control for active catheter systems. Sensors and Actuators A Physical, 137, 321-9. [Pg.247]

Chen Z, Tan X (2008) A control-oriented and physics-based model for ionic polymer-metal composite actuators. lEEE/ASME Trans Mechatron 13(5) 519-529 Chung CK, Fung PK, Hong YZ et al (2006) A novel fabrication of ionic polymer-metal composites (IPMC) actuator with silver nano-powders. Sens Actuators B 117 367-375 de Gennes PG, Okumura K, Shahinpoor M, Kim KJ (2000) Mechanoelectric effects in ionic gels. Europhys Lett 50 513 518... [Pg.148]

Chung CK, Fung PK, Hong YZ, Ju MS, Lin CCK, Wn TC (2006) A novel fabrication of ionic polymer-metal composites (IPMC) actuator with silver nano-powders. Sensors Actuators B... [Pg.168]

This chapter describes how to start experiments with ionic polymer-metal composite (IPMC) actuators. In the first part, a fabrication of IPMC actuator element is summarized. In the next part, how to setup a measurement system of IPMC actuator and test the actuator performance is described. In the last part, a control method of IPMC actuator is discussed. From the information in this chapter, experiments with IPMC actuators can be started. [Pg.216]

As shown in the previous chapters, an ionic polymer-metal composite (IPMC) is composed of an ionic polymer plated with metal electrodes. By deforming the ionic polymer and patterning the plated electrodes, soft actuator devices that are capable of moving in multiple degrees of fieedom can be fabricated. [Pg.216]

De Luca V, Digiamberardino P, Di Pasquale G, Graziani S, Pollicino A, Umana E, Xibilia MG (2013) Ionic electroactive polymer metal composites fabricating, modeling, and applications of postsilicon smart devices. J Polym Sci Part B Polym Phys 51 699-734... [Pg.196]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...