Ionic liquid range

The data in Table 7.1 show that, as expected, density, ionic radius, and atomic radius increase with increasing atomic number. However, we should also note the marked differences in m.p. and liquid range of boron compared with the other Group III elements here we have the first indication of the very large difference in properties between boron and the other elements in the group. Boron is in fact a non-metal, whilst the remaining elements are metals with closely related properties. 

We had no good way to predict if they would be liquid, but we were lucky that many were. The class of cations that were the most attractive candidates was that of the dialkylimidazolium salts, and our particular favorite was l-ethyl-3-methylimid-azolium [EMIM]. [EMIMJCl mixed with AICI3 made ionic liquids with melting temperatures below room temperature over a wide range of compositions [8]. We determined chemical and physical properties once again, and demonstrated some new battery concepts based on this well behaved new electrolyte. We and others also tried some organic reactions, such as Eriedel-Crafts chemistry, and found the ionic liquids to be excellent both as solvents and as catalysts [9]. It appeared to act like acetonitrile, except that is was totally ionic and nonvolatile. 

The alkylation process possesses the advantages that (a) a wide range of cheap haloalkanes are available, and (b) the substitution reactions generally occur smoothly at reasonable temperatures. Furthermore, the halide salts formed can easily be converted into salts with other anions. Although this section will concentrate on the reactions between simple haloalkanes and the amine, more complex side chains may be added, as discussed later in this chapter. The quaternization of amines and phosphines with haloalkanes has been loiown for many years, but the development of ionic liquids has resulted in several recent developments in the experimental techniques used for the reaction. In general, the reaction may be carried out with chloroalkanes, bromoalkanes, and iodoalkanes, with the reaction conditions required becoming steadily more gentle in the order Cl Br I, as expected for nucleophilic substitution reactions. Fluoride salts cannot be formed in this manner. 

It is hoped that this section will give the reader a better appreciation of the range of ionic liquids that have already been prepared, as well as a summary of the main techniques involved and the potential pitfalls. While the basic chemistry involved is relatively straightforward, the preparation of ionic liquids of known purity may be less easily achieved, and it is hoped that the ideas given here may be of assistance to the reader. It should also be noted that many of the more widely used ionic liquids are now commercially available from a range of suppliers, including some specializing in the synthesis of ionic liquids [53]. 

This table illustrates pretty well that the large-scale ionic liquid will probably not comprise a diallcylimidazolium cation and a [CE3S02)2N] anion. Over a medium-term timescale, we would expect a range of ionic liquids to become commercially available for 25-50 per liter on a ton scale. Halogen-free systems made from cheap anion sources are expected to meet this target first. 

It should also be noted that terms such as high temperature and low temperature are also subjective, and depend to a great extent on experimental context. If we exclusively consider ionic liquids to incorporate an organic cation, and further limit the selection of salts to those that are liquid below 100 °C, a large range of materials are still available for consideration. 

The following discussion concerns the thermal liquidus ranges available in different ionic liquids, as functions of cation and anion structure and composition. In particular, those structural features of cation and anion that promote these properties (while providing other desirable, and sometimes conflicting characteristics of the liquid, such as low viscosity, chemical stability, etc.) and variations in liquidus ranges and stabilities are the focus of this chapter. 

The reported transition temperatures for a range of [RMIM] ionic liquids [6, 23-26, 46] are shown in Figure 3.1-5, with varying anion and alkyl chain substituent length. 

In a series of papers published throughout the 1980s, Colin Poole and his co-workers investigated the solvation properties of a wide range of alkylammonium and, to a lesser extent, phosphonium salts. Parameters such as McReynolds phase constants were calculated by using the ionic liquids as stationary phases for gas chromatography and analysis of the retention of a variety of probe compounds. However, these analyses were found to be unsatisfactory and were abandoned in favour of an analysis that used Abraham s solvation parameter model [5]. 

One of the earliest solvent polarity scales is Person s D scale. This scale is based on the endojexo ratio of the Diels-Alder reaction between cyclopentadiene and methyl acrylate (Figure 3.5-2, O = logio endo/exo). This reaction has been conducted in a number of ionic liquids, giving values in the 0.46-0.83 range [26]. 

To date, most studies of ionic liquids have used a small set of ionic liquids and have been based on the idea that, if the response of a particular probe molecule or reaction is like that in some known molecular solvent, then it can be said that the polarities of the ionic liquid and the molecular solvent are the same. This may not necessarily be the case. Only systematic investigations will show whether this is tme, and only when a wide range of ionic liquids with a wide range of different solvent polarity probes have been studied will we be able to make any truly general statements about the polarity of ionic liquids. Indeed, in our attempts to understand the nature of solvent effects in ionic liquids, we will probably have to refine our notion of polarity itself However, it is possible to draw some tentative general conclusions. 

Not all ionic liquids are the same, different combinations of anions and cations produce solvents with different polarities. No ionic liquids have shown themselves to be super-polar regardless of the method used to assess their polarities, ionic liquids come within the range of molecular solvents. Most general measures of overall polarity place ionic liquids in the range of the short- to medium-chain alcohols. 

Ionic liquids possess a variety of properties that make them desirable as solvents for investigation of electrochemical processes. They often have wide electrochemical potential windows, they have reasonably good electrical conductivity and solvent transport properties, they have wide liquid ranges, and they are able to solvate a wide variety of inorganic, organic, and organometallic species. The liquid ranges of ionic liquids have been discussed in Section 3.1 and their solubility and solvation in... 

A key criterion for selection of a solvent for electrochemical studies is the electrochemical stability of the solvent [12]. This is most clearly manifested by the range of voltages over which the solvent is electrochemically inert. This useful electrochemical potential window depends on the oxidative and reductive stability of the solvent. In the case of ionic liquids, the potential window depends primarily on the resistance of the cation to reduction and the resistance of the anion to oxidation. (A notable exception to this is in the acidic chloroaluminate ionic liquids, where the reduction of the heptachloroaluminate species [Al2Cl7] is the limiting cathodic process). In addition, the presence of impurities can play an important role in limiting the potential windows of ionic liquids. 

The electrochemical windows exhibited by the chloroaluminates tend to fall into three ranges that correspond to the types of chloroaluminate ionic liquids basic. 

Neutron diffraction has been used extensively to study a range of ionic liquid systems however, many of these investigations have focussed on high-temperature materials such as NaCl, studied by Enderby and co-workers [3]. A number of liquid systems with relatively low melting points have been reported, and this section summarizes some of the flndings of these studies. Many of the salts studied melt above 100 °C, and so are not room-temperature ionic liquids, but the same principles apply to the study of these materials as to the lower melting point salts. 

---