Ion trapping efficiency

The most widely regarded approach to accomplish the determination of as many pesticides as possible in as few steps as possible is to use MS detection. MS is considered a universally selective detection method because MS detects all compounds independently of elemental composition and further separates the signal into mass spectral scans to provide a high degree of selectivity. Unlike GC with selective detectors, or even atomic emission detection (AED), GC/MS may provide acceptable confirmation of the identity of analytes without the need for further information. This reduces the need to re-inject a sample into a separate GC system (usually GC/MS) for pesticide confirmation. Through the use of selected ion monitoring (SIM), efficient ion-trap or quadrupole devices, and/or tandem mass spectrometry (MS/MS), modern GC/MS instruments provide LODs similar to or lower than those of selective detectors, depending on the analytes, methods, and detectors. 

Instrumental developments concern micro ion traps (sub-mm i.d.) [193], extension of the mass range, mass resolution and capture efficiency for ions generated externally. Fast separations at very low detection levels are possible by means of hybrid QIT/reToF mass spectrometry [194]. 

Ion trap MS is particularly suited for chemical structure elucidation, as it allows for simultaneous ion storage, ion activation and fragmentation, and product ion analysis. The fragmentation pathway of selected ions and the fragmentation products provide information on the molecular structure. Compared with triple-quadrupole and especially with sector instruments, the ion trap instrument provides more efficient conversion of precursor ion into product ions. However, the CID process via resonance excitation, although quite efficient in terms of conversion yield, generally results in only one (major) product ion in the product-ion mass spectrum. MS/MS with a quadrupole ion trap offers a number of advantages ... 

The coupling of a mass spectrometer to CE and CEC provides a powerful system for the analysis of pharmaceuticals and complex biological mixtures. This can replace or complement other conventional detection methods such as UV, electrochemical, or LIE that provide less structural information. The use of mass spectrometer as a detector enhances the usefulness of the CE and CEC and allows an efficient separation and identification of complex mixtures, obtaining structure and/or molecular mass information. The choice of mass analyzers used in CE/CEC-MS depends on factors such as sensitivity, mass resolution, requirement for structural elucidation, and the type of application (Table 5). The analyzers that have been used in CEC analysis include time-of-flight (TOE), quadrupole (Q), ion-trap (IT), fourier... 

In a linear ion trap one of the most efficient ways to perform mass analysis is to eject ions radially. Hager [60] demonstrated that, by using fringe field effects, ions can also be mass-selectively ejected in the axial direction. There are several benefits for axial ejection (i) it does not require open slits in the quadrupole, (ii) the device can be operated either as a regular quadrupole or a LIT using one detector. A commercial hybrid mass spectrometer was developed based on a triple quadrupole platform where Q3 can be operated either in normal RF/DC mode or in the LIT ion trap mode (Fig. 1.24). 

---