Iodides, acid complex

In practice iodide salts of the amino acid complexes are used, as I is lost as Mel under conditions of excess alkylating agent. 

It has been reported ( ) that homogeneous ruthenium- or cobalt-iodide-based complexes catalyze the homologation of esters of carboxylic acid to their next higher homologues, for instance ... 

Wu and Biemann have conducted MALDI analysis on comprehensive sets of earbosilane dendrimers (CSDs) of three different generations and with chloroalkyl, trimethylamino, trimethylammonium, and alkylsulfonate surface functionality. For the nonpolar chloroalkyl-terminated dendrimers and the trimethylamino-functional dendrimers (easily protonated) well-resolved mass data could be obtained using 5-chlorosilalic acid in combination with silver trifluoroacetate. Silver cations have been used extensively in MALDI analysis of other nonpolar dendrimers, but typically give a complicated isotope pattern (Table 2). For dendrimers with trimethylammonium chloride or iodide functionality, complexes with multiple matrix anions were formed, and the alkylsulfonate dendrimers could be detected after ion exchange into ammonium salts with DHBA as a matrix. 

Furuichi, R. and Liebhafsky, H.A., Rate of the Dushman reaction in iodic acid at low iodide concentration complexity of ionic acid. Bull. Chem. Soc. Jpn., 48, 745-750, 1975. 

Turner, D. J. On the existence of iodide boric acid complexes in saturated steam. Proc. 2. CSNI Workshop on Iodine Chemistry in Reactor Safety, Toronto, Can., 1988 Report AECL-9923, p. 135-150 (1989)... 

PuUy hydroly2ed poly(vinyl alcohol) and iodine form a complex that exhibits a characteristic blue color similar to that formed by iodine and starch (171—173). The color of the complex can be enhanced by the addition of boric acid to the solution consisting of iodine and potassium iodide. This affords a good calorimetric method for the deterrnination of poly(vinyl alcohol). Color intensity of the complex is effected by molecular weight, degree of... 

Bromide ndIodide. The spectrophotometric determination of trace bromide concentration is based on the bromide catalysis of iodine oxidation to iodate by permanganate in acidic solution. Iodide can also be measured spectrophotometricaHy by selective oxidation to iodine by potassium peroxymonosulfate (KHSO ). The iodine reacts with colorless leucocrystal violet to produce the highly colored leucocrystal violet dye. Greater than 200 mg/L of chloride interferes with the color development. Trace concentrations of iodide are determined by its abiUty to cataly2e ceric ion reduction by arsenous acid. The reduction reaction is stopped at a specific time by the addition of ferrous ammonium sulfate. The ferrous ion is oxidi2ed to ferric ion, which then reacts with thiocyanate to produce a deep red complex. 

Methane sulfonic acid, trifluoroacetic acid, hydrogen iodide, and other Brmnsted acids can faciUtate 3 -acetoxy displacement (87,173). Displacement yields can also be enhanced by the addition of inorganic salts such as potassium thiocyanate and potassium iodide (174). Because initial displacement of the acetoxy by the added salt does not appear to occur, the role of these added salts is not clear. Under nonaqueous conditions, boron trifluoride complexes of ethers, alcohols, and acids also faciUtate displacement (87,175). 

Bismuth ttiiodide may be prepared by beating stoichiometric quantities of the elements in a sealed tube. It undergoes considerable decomposition at 500°C and is almost completely decomposed at 700°C. However, it may be sublimed without decomposition at 3.3 kPa (25 mm Hg). Bismuth ttiiodide is essentially insoluble in cold water and is decomposed by hot water. It is soluble in Hquid ammonia forming a red triammine complex, absolute alcohol (3.5 g/100 g), benzene, toluene, and xylene. It dissolves in hydroiodic acid solutions from which hydrogen tetraiodobismuthate(Ill) [66214-37-7] HBil 4H2O, may be crystallized, and it dissolves in potassium iodide solutions to yield the red compound, potassium tetraiodobismuthate(Ill) [39775-75-2] KBil. Compounds of the type tripotassium bismuth hexaiodide [66214-36-6] K Bil, are also known. 

Reaction with vatious nucleophilic reagents provides several types of dyes. Those with simple chromophores include the hernicyanine iodide [16384-23-9] (20) in which one of the terminal nitrogens is nonheterocyclic enamine triearbocyanine iodide [16384-24-0] (21) useful as a laser dye and the merocyanine [32634-47-2] (22). More complex polynuclear dyes from reagents with more than one reactive site include the trinuclear BAB (Basic-Acidic-Basic) dye [66037-42-1] (23) containing basic-acidic-basic heterocycles. Indolizinium quaternary salts (24), derived from reaction of diphenylcyclopropenone [886-38-4] and 4-picoline [108-89-4] provide trimethine dyes such as (25), which absorb near 950 nm in the infrared (23). 

It resembles tetracyanoethylene in that it adds reagents such as hydrogen (31), sulfurous acid (31), and tetrahydrofuran (32) to the ends of the conjugated system of carbon atoms suffers displacement of one or two cyano groups by nucleophilic reagents such as amines (33) or sodiomalononittile (34) forms TT-complexes with aromatic compounds (35) and takes an electron from iodide ion, copper, or tertiary amines to form an anion radical (35,36). The anion radical has been isolated as salts of the formula (TCNQ) where is a metal or ammonium cation, and n = 1, 1.5, or 2. Some of these salts have... 

Molecular Interactions. Various polysaccharides readily associate with other substances, including bile acids and cholesterol, proteins, small organic molecules, inorganic salts, and ions. Anionic polysaccharides form salts and chelate complexes with cations some neutral polysaccharides form complexes with inorganic salts and some interactions are stmcture specific. Starch amylose and the linear branches of amylopectin form inclusion complexes with several classes of polar molecules, including fatty acids, glycerides, alcohols, esters, ketones, and iodine/iodide. The absorbed molecule occupies the cavity of the amylose helix, which has the capacity to expand somewhat to accommodate larger molecules. The starch—Hpid complex is important in food systems. Whether similar inclusion complexes can form with any of the dietary fiber components is not known. 

A solution of 85.8 g (0.2 moles) of 3/ -acetoxy-27-norchoIest-5-en-25-one in 500 ml of anhydrous thiophen-free benzene is added to a Grignard solution prepared from 24.3 g (1 g-atom) of magnesium and 149 g (1.05 moles) of freshly distilled methyl iodide in 575 ml of anhydrous ether. The mixture is refluxed for 3 hr and allowed to stand overnight. After cooling to 5° the complex is decomposed by the slow addition of 200 ml of ice water and 400 ml of 50% acetic acid solution, and steam distilled until no more oil passes over. The residual product is filtered, washed with water and dried at 80°. Crystallization from methanol gives 70 g (87%) of cholest-5-ene-3)5,25-diol mp 179.5-181°. The analytical sample melts at 181.5-182.5° [a]o —39° (CHCI3). 

Codeposition of silver vapor with perfluoroalkyl iodides at -196 °C provides an alternative route to nonsolvated primary perfluoroalkylsilvers [272] Phosphine complexes of trifluaromethylsilver are formed from the reaction of trimethyl-phosphme, silver acetate, and bis(trifluoromethyl)cadmium glyme [755] The per-fluoroalkylsilver compounds react with halogens [270], carbon dioxide [274], allyl halides [270, 274], mineral acids and water [275], and nitrosyl chloride [276] to give the expected products Oxidation with dioxygen gives ketones [270] or acyl halides [270] Sulfur reacts via insertion of sulfur into the carbon-silver bond [270] (equation 188)... 

---