Intramolecular pyrrolidine

The reaction has recently been developed further by use of the milder reagents PhIO and PhI(OAc)2, respectively, within the iodine(III)-mediated intramolecular pyrrolidine formation from alkenes. For example, the combined use of iodoso-benzene and trimethylsilyl triflate generates reaction conditions that enable an efficient aminooxygenation of urea precursors 61. Because of the acidic reaction conditions, the final carbon-heteroatom bond formation cannot proceed toward diamination, and aminooxygenation products 62 are obtained selectively. The free aminoalcohols are conveniently obtained by acidic cleavage of the cyclic carbamate [51]. 

When allene derivatives are treated with aryl halides in the presence of Pd(0), the aryl group is introduced to the central carbon by insertion of one of the allenic bonds to form the 7r-allylpalladium intermediate 271, which is attacked further by amine to give the allylic amine 272. A good ligand for the reaction is dppe[182]. Intramolecular reaction of the 7-aminoallene 273 affords the pyrrolidine derivative 274[183]. 

The converse situation in which ring closure is initiated by the attack of a carbon-based radical on the heteroatom has been employed only infrequently (Scheme 18c) (66JA4096). The example in Scheme 18d begins with an intramolecular carbene attack on sulfur followed by rearrangement (75BCJ1490). The formation of pyrrolidines by intramolecular attack of an amino radical on a carbon-carbon double bond is exemplified in Scheme 19. In the third example, where cyclization is catalyzed by a metal ion (Ti, Cu, Fe, Co " ), the stereospecificity of the reaction depends upon the choice of metal ion. 

There are several reaction sequences which involve such intramolecular hydrogen abstraction steps. One example is the photolytically intitiated decomposition of N-haloamines in acidic solution, which is known as the Hofinann-Loffier reactionThe reaction leads initially to y-haloamines, but these are usually converted to pyrrolidines by intramolecular nucleophilic substitution ... 

A pseudo 1,2 cycloaddition (actually a 1,3 cycloaddition, but may be considered a 1,2 type if a three-membered ring is considered analogous to an alkene) is observed when the pyrrolidine enamine of cyclohexanone is allowed to react with N-carbethoxyaziridine (129) to produce octahydro-indole 130 91). Octahydroindoles and pyrrolidines can also be produced through the intramolecular alkylation of the enamines of certain halo-ketourethanes 176a). 

The presence of an substituent, found in the pyrrolidine enamine of 2-methylcyclohexanone, blocks the possibility of an intramolecular proton transfer in the zwitterionic intermediate and thus only the benzocyclobutane... 

This sulfonate, prepared from B0CNHCH2CH2C(CH3)2CH20H and the sulfonyl chloride (Pyr, 100% yield) is cleaved by initial BOC cleavage to release the free amine after pH adjustment to 7-8. Intramolecular displacement occurs to release the sulfonate and a pyrrolidine. ... 

Ammonia treatment removes the TFA group, which then releases the phosphate and pyrrolidine through intramolecular cyclization. The analogous pentyl derivative was also prepared. ... 

The Stork enamine reaction and the intramolecular aldol reaction can be carried out in sequence to allow the synthesis of cyclohexenones. For example, reaction of the pyrrolidine enamine of cyclohexanone with 3-buten-2-one. followed by enamine hydrolysis and base treatment, yields the product indicated. Write each step, and show the mechanism of each. 

In the intramolecular amidoalkylation of certain (Z)-allylsilanes, piperidine derivatives (n = 2) are formed less stereoselectively than the corresponding pyrrolidines (n = 1). The complete regiocontrol is induced by the /3-effect of the silicon atom. 

Another example of a microwave-assisted 1,3-dipolar cycloaddition using azomethine ylides and a dipolarophile was the intramolecular reaction reported for the synthesis of hexahydrochromeno[4,3-fo]pyrrolidine 105 [70]. It was the first example of a solvent-free microwave-assisted intramoleciflar 1,3-dipolar cycloaddition of azomethine ylides, obtained from aromatic aldehyde 102 and IM-substituted glycinate 103 (Scheme 36). The dipole was generated in situ (independently from the presence of a base like TEA) and reacted directly with the dipolarophile present within the same molecifle. The intramolecu-... 

Secondary amines can be added to certain nonactivated alkenes if palladium(II) complexes are used as catalysts The complexation lowers the electron density of the double bond, facilitating nucleophilic attack. Markovnikov orientation is observed and the addition is anti An intramolecular addition to an alkyne unit in the presence of a palladium compound, generated a tetrahydropyridine, and a related addition to an allene is known.Amines add to allenes in the presence of a catalytic amount of CuBr " or palladium compounds.Molybdenum complexes have also been used in the addition of aniline to alkenes. Reduction of nitro compounds in the presence of rhodium catalysts, in the presence of alkenes, CO and H2, leads to an amine unit adding to the alkene moiety. An intramolecular addition of an amine unit to an alkene to form a pyrrolidine was reported using a lanthanide reagent. 

The reaction can be done intramolecularly. N-Benzyl pent-4-ynamide reacted with tetrabutylammonium fluoride to an alkylidene lactam. Similar addition of a tosylamide-alkene, with a palladium catalyst, led to a vinyl Al-tosyl pyrrolidine. Similar cyclization reactions occur with tosylamide-alkynes. ... 

The pincer complexes 89-90 (Fig. 2.14) catalyse the intramolecular hydroamination/ cyclisation of unactivated alkenes, yielding pyrrolidines and piperidines (n = 1,2, respectively). The reactions can be carried out in benzene or water with high... 

In 2003, Livinghouse et al. also reported that chelating bis(thiophosphonic amidates) complexes of lanthanide metals, such as yttrium or neodymium, were able to catalyse intramolecular alkene hydroaminations. These complexes were prepared by attachment of the appropriate ligands to the metals by direct metalation with Ln[N(TMS)2]3- When applied to the cyclisation of 2-amino-5-hexene, these catalysts led to the formation of the corresponding pyrrolidine as a mixture of two diastereomers in almost quantitative yields and diastereos-electivities of up to 88% de (Scheme 10.81). 

Enantiomerically pure triene 395, whose chirality stems from that of /3-D-ribofuranosc, was transformed into the chiral pyrrolidine 396 by intramolecular iodoamination. A subsequent RCM reaction gave indolizine derivative 397. Treatment of this compound with nucleophiles afforded mixtures of indolizine and quinolizine derivatives in... 

Sequential pyrrolidine and hydantoin ring-forming reactions via intramolecular [2+3] cycloaddition have been applied to the stereoselective solid-phase synthesis of conformationally constrained tricyclic triazacyclopenta [C]pentalene scaffold 43 < 1999JOC8342>. These novel compounds 43 share the structural complexity characteristic of certain alkaloid natural products, angular triquinanes. The retrosynthetic analysis is shown in Scheme 87. 

Intramolecular inverse electron-demand Diels-Alder reaction of iV-propargyl-2-(pyrimidin-2-yl)pyrrolidine provides an alternative route to pyridopyrrolizines. For example, heating of 130 to 170 °C in nitrobenzene affords the cyclized product with the loss of HCN <1992JOC3000> (Equation 9). The above reference includes molecular orbital (MO) calculations on relative reactivities in this series. 

Finally in 2005, Hutt and Mander reported their strategy for the synthesis of nominine (Scheme 1.3) [29], The approach relies upon construction of the steroidal ABC carbocyclic ring structure followed by stepwise preparation of the fused aza-ring system. In the key sequence of the synthetic study, enone 50 was oxidized to dienone 51 with DDQ followed by Lewis acid-catalyzed intramolecular conjugate addition of the methylcarbamate to the newly formed dienone to deliver pyrrolidine 52. 

Intramolecular cycloadditions are among the most efficient methods for the synthesis of fused bicyclic ring systems [30]. From this perspective, the hetisine skeleton encompasses two key retro-cycloaddition key elements. (1) a bridging pyrrolidine ring accessible via a [3+2] azomethine dipolar cycloaddition and (2) a [2.2.2] bicyclo-octane accessible via a [4+2] Diels-Alder carbocyclic cycloaddition (Chart 1.4). While intramolecular [4+2] Diels—Alder cycloadditions to form [2.2.2] bicycle-octane systems have extensive precedence [3+2], azomethine dipolar cycloadditions to form highly fused aza systems are rare [31-33]. The staging of these two operations in sequence is critical to a unified synthetic plan. As the proposed [3+2] dipolar cycloaddition is expected to be the more challenging of the two transformations, it should be conducted in an early phase in the forward synthetic direction. As a result, a retrosynthetic analysis would entail initial consideration of the [4+2] cycloaddition to arrive at the optimal retrosynthetic C-C bond disconnections for this transformation. 

The feasibility of azomethine ylide generation from 7 and intramolecular dipolar cycloaddition was examined under a variety of conditions. For example, activation of vinylogous amide 71 with BzOTf [41] followed by desilylation with TBAT led to complex mixtures of products. Likewise, using MeOTf as the activating agent yielded similar results. Significantly, none of these protocols furnished the desired pyrrolidine 73. Only decomposition of the silylpyridinone to form unidentified products was observed, despite the fact that quantitative O-methylation of the... 

Each of the 3-oxidopyridinium betaine substrates 83, 91, and 98 were extensively investigated for their potential to engage in intramolecular dipolar cycloaddition (Scheme 1.10). Heating a solution of ene-nitrile 83 in variety of solvents failed to effect the desired intramolecular [3+2] dipolar cycloaddition to form the bridged pyrrolidine 100, as tricyclic oxidopyridinium betaine 103 was the only... 

New cyclizations via photochemically generated aminyl radicals have been reported, including further examples of the Hofmann-Loeffler-Freytag reaction.313 Intramolecular addition of an aminyl radical, generated by photochemically induced nitrogen chlorine bond homoysis, is also accompanied by cyclization as illustrated by the conversion of the unsaturated N-chloroamide 378 to the pyrrolidine 379.314 Piperidine formation can also... 

Two type la syntheses of (3-hydroxypyrroles have appeared. An aza-Nazarov cyclization of l-azapenta-l,4-dien-3-ones produced (3-hydroxypyrroles including 2,2 -bipyrroles <06EJO5339>. A second approach to a (3-hydroxypyrrole involved an intramolecular N-H insertion into a rhodium carbene derived from the decomposition of a diazoketone <06JOC5560>. On the other hand, the photochemical decomposition of the diazoketone led to pyrrolidin-2-ones. 

An intramolecular variation of the same reaction principle has been used by Bashiardes and coworkers to synthesize fused pyrrolidine and pyrrole derivatives... 

An example of an intramolecular palladium-catalyzed oxidation of an allene involving carbonylation was used in the synthesis of pumilotoxin 251 D (equation 32)65. Intramolecular aminopalladation of the allene followed by carbonylation of the palladium-carbon bond and subsequent oxidative cleavage of the acylpalladium intermediate by CuCE afforded pyrrolidine 72 in which the chirality at the carbon at the 2-position was established. 

---