Intercalates formation

Inhibition by surface complexes has been observed during the synthesis of hydrogen bromide, but here it was suggested that inhibition resulted from interference with formation of e.g. intercalate compounds. Coughlin ascribes this interference to electronic interactions, but geometric crossUnking by surface complexes may also reduce the chance of intercalate formation. 

Fig. 14. 71-Stacking and chaige-tiansfei dominated recognition of flat aromatic—heteioaromatic substrates (formation of intercalates).

Further improvements in anode performance have been achieved through the inclusion of certain metal salts in the electrolyte, and more recently by dkect incorporation into the anode (92,96,97). Good anode performance has been shown to depend on the formation of carbon—fluorine intercalation compounds at the electrode surface (98). These intercalation compounds resist further oxidation by fluorine to form (CF ), have good electrical conductivity, and are wet by the electrolyte. The presence of certain metals enhance the formation of the intercalation compounds. Lithium, aluminum, or nickel fluoride appear to be the best salts for this purpose (92,98). 

There is Htde evidence of the direct formation of sodium carbide from the elements (29,30), but sodium and graphite form lamellar intercalation compounds (16,31—33). At 500—700°C, sodium and sodium carbonate produce the carbide, Na2C2 above 700°C, free carbon is also formed (34). Sodium reacts with carbon monoxide to give sodium carbide (34), and with acetylene to give sodium acetyHde, NaHC2, and sodium carbide (disodium acetyHde), Na2C2 (see Carbides) (8). 

The formation of fullerenes and CNTs has also been affected by their environmental atmosphere [22] and, in particular, a hydrogen atmosphere plays an important role in forming graphitic structures of multi-walled CNTs (MWCNTs) in the form of buckybundles [24]. Intercalation into MWCNTs has been difficult or impossible, because there is no space for intercalants to enter into a Russian-doll-type structure of the nanotubes. However, the buckybundles formed in the hydrogen arc discharge were found to be successfully intercalated with potassium and ferric chloride (FeCl3) without breaking the... 

The reversible intercalation of various oxoacids under oxidizing conditions leads to lamellar graphite salts some of which have been known for over a century and are now particularly well characterized structurally. For example, the formation of the blue, first-stage compound with cone H2SO4 can be expressed by the idealized equation... 

Furthermore, the molecular size of the Li+ -solvating solvents may affect the tendency for solvent co-intercalation. Crown ethers [19, 152-154, 196, 197] and other bulky electrolyte additives [196] are assumed to coordinate Li+ ions in solution in such a way that solvent co-intercalation is suppressed. The electrochemical formation of binary lithiated graphites Li tC6 was also reported for the reduction... 

These morphological changes (hill and blister formation) were attributed to the intercalation of solvated lithium ion into graphite interlayers and to the accumulation of its decomposition products (some of them gases), respectively. On the other hand, rapid exfoliation and rupturing of graphite layers were observed in ImolL-1... 

LiC104 / PC electrolyte (Fig. 6), a process which was considered to be responsible for the continuing solvent decomposition when graphite is charged in PC-based electrolytes. This showed that, even in EC-based electrolytes, some degree of solvent co-intercalation exists but does not prevent formation of a stable SEI. It is clear that... 

Using dilatometry in parallel with cyclic voltammetry (CV) measurements in lmolL 1 LiC104 EC-l,2-dimethoxy-ethane (DME), Besenhard et al. [87] found that over the voltage range of about 0.8-0.3 V (vs. Li/Li+), the HOPG crystal expands by up to 150 percent. Some of this expansion seems to be reversible, as up to 50 percent contraction due to partial deintercalation of solvated lithium cations was observed on the return step of the CV. It was concluded [87] that film formation occurs via chemical reduction of a solvated graphite intercalation compound (GIC) and that the permselective film (SEI) in fact penetrates into the bulk of the HOPG. It is important to repeat the tests conducted by Besenhard et al. [87] in other EC-based electrolytes in order to determine the severity of this phenomenon. 

Carbon dioxide as additive improves the behavior of (Li02C0CH2)2 films formed above intercalation potentials in EC/DEC-based electrolytes due to increased formation of Li 2 CO 3 [200], It is interesting to note that SO2 reduction occurs at quite high potentials, before the reduction of other electrolyte components films contain inorganic and organic lithium salts [201]. 

This approach finds experimental support in FTIR measurements of the oxidation of PANI in organic solvents which indicate an anion intercalation mechanism for the second oxidation step. However, the IR findings may also be interpreted as support for the formation of a protonated imine structure... 

---