INDEX Mirrors

For an air/glass interface, tan 0b = n, the refractive index of glass. In a gas laser, the light must be reflected back and forth between mirrors and through the gas container hundreds of times. Each time the beam passes through the cavity, it must pass through transparent windows at the ends of the gas container (Figure 18.10b), and it is clearly important that this transmission be as efficient as possible. 

A characteristic dependence of the efficiency on the thickness of the active layer has also been observed for single layer polymer LEDs. This effect has been attributed to reflection of the EL light at the mirror-like metal electrodes resulting in characteristic interference maxima and minima depending on the thickness of the active layer and its refractive index [116). 

In order to compensate for the distortions in the wavefront due to the atmosphere we must introduce a phase correction device into the optical beam. These phase correction devices operate by producing an optical path difference in the beam by varying either the refractive index of the phase corrector (refractive devices) or by introducing a variable geometrical path difference (reflective devices, i.e. deformable mirrors). Almost all AO systems use deformable mirrors, although there has been considerable research about liquid crystal devices in which the refractive index is electrically controlled. 

When one has a planar surface, one can take advantage of X-ray optics to enhance surface sensitivity.61,62 The most important is specular or mirror reflection, and this is due to the fact that at X-ray energies the index of refraction of matter is slightly less than one and is given by ... 

Picosecond pedestal, 143 Pin-hole camera, 128 Plasma channels, 112, 147, 148 Plasma defocusing, 84, 91 Plasma frequency, 166 Plasma index of refraction, 147 Plasma mirror (PM) technique, 194 Plasma wakefield acceleration, 172 Plasma wavelength, 166 Plasma-induced effects, 83 Polarization, 97 Polarization control, 87 Ponderomotive force, 170 Population inversions, 19 Post-irradiation spectroscopy, 156 Pre-pulse, 143 Propagation, 81 Protein, 102 Pump depletion, 151... 

Bragg mirrors on periodic stacks of layers Periodic stacks of metal nanoparticles or dielectric layers with alternating high and low refractive index produce a desired reflectance of the mirror that depends on the thickness and the refractive index of the layers in the stack 16,17... 

When the first crystals just start to melt, record the temperature. When the last crystal just disappears, record the temperature. If both points appear to be the same, either the sample is extremely pure, or the temperature rise was too fast. If you record the temperature with the horizontal index line in the mirror matched to the lines etched on both sides of the periscope window and the top of the mercury thread at the same time, you ll be looking at the thermometer scale head on. This will give you the smallest error in reading the temperature (Fig. 38). 

---