In steel

C (Mond process). The silver-white metal is ccp. The metal is not tarnished by air but is attacked by acids (except cone. HNO3). It is resistant to Fj. It is used extensively in alloys, particularly in steels and cast iron and as a coinage metal. Used in glass (green) in catalysts (particularly for hydrogenation). Western world production 1981 662 000 tonnes. 

The showm in Fig. 4 graph of the dependence of the WIROTEST 202 as a function of the residual austenite content, allows to evaluate the content of residual austenite in steel in the scope for 5 +/-100%. 

Additional information can be obtained, if one calculates the smallest thickness difference Ad of sf eel - for instance the depth of a crack - which can be discerned on a radiograph whose granularity is just as high as the limiting value a, of the respective class of the standard EN 584-1. For this estimation the well known relation for the (optical) density difference AD (visible contrast) which results from a difference of thickness Ad in steel is used ... 

Shear Horizontal (SH) waves generated by Electromagnetic Acoustic Transducer (EMAT) have been used for sizing fatigue cracks and machined notches in steels by Time-of-Flight Diffraction (TOED) method. The used EMATs have been Phased Array-Probes and have been operated by State-of-the-art PC based phased array systems. Test and system parameters have been optimised to maximise defect detection and signal processing methods have been applied to improve accuracy in the transit time measurements. 

Application of Surface SH Wave s Detection Standard for the Ultrasonic Inspection of Weld Defects in Steel Structures, 3rd Revision, Architectural Institute of Japan, P27, (1996)... 

Development of a photothermal measuring technique for the determination of hardness profile in steel ... 

Very large quantities of oxygen are used in steel manufacture (p. 392). Other important uses include organic oxidation reactions the oxidation of ethene CH2=CH2 to epoxyethane, CH2—CHj, is of... 

The "periodic acids and periodates are powerful oxidising agents and they will oxidise manganese to manganate(VlI). a reaction used to determine small quantities of manganese in steel. 

The metal looks like iron it exists in four allotropic modifications, stable over various temperature ranges. Although not easily attacked by air. it is slowly attacked by water and dissolves readily in dilute acids to give manganese(II) salts. The stable form of the metal at ordinary temperatures is hard and brittle—hence man ganese is only of value in alloys, for example in steels (ferroalloys) and with aluminium, copper and nickel. 

To prepare the hydrochloride, dissolve about 1 g. of the compound (which need not be perfectly dry) in about 8 ml. of alcohol. Add this solution to boiling dilute hydrochloric acid (10 ml. of the concentrated acid and 80 ml. of water). Boil for 5 minutes, filter the hot solution if necessary, and allow to cool. p-Amino-azobenzene hydrochloride separates in steel-blue crystals. Filter, wash with a little dilute hydrochloric acid, and dry. 

Silicon is important to plant and animal life. Diatoms in both fresh and salt water extract Silica from the water to build their cell walls. Silica is present in the ashes of plants and in the human skeleton. Silicon is an important ingredient in steel silicon carbide is one of the most important abrasives and has been used in lasers to produce coherent light of 4560 A. 

Perhaps the most common type of problem encountered in the analytical lab is a quantitative analysis. Examples of typical quantitative analyses include the elemental analysis of a newly synthesized compound, measuring the concentration of glucose in blood, or determining the difference between the bulk and surface concentrations of Cr in steel. Much of the analytical work in clinical, pharmaceutical, environmental, and industrial labs involves developing new methods for determining the concentration of targeted species in complex samples. Most of the examples in this text come from the area of quantitative analysis. 

As a final example, the determination of carbon in steels and other metal alloys can be determined by heating the sample. The carbon is converted to CO2, which is collected in an appropriate absorbent trap, providing a direct measure of the amount of C in the original sample. 

The concentration of Mn in steel can be determined by a neutron activation analysis using the method of external standards. A 1.000-g sample of an unknown steel sample and a 0.950-g sample of a standard steel known to contain 0.463% w/w Mn, are irradiated with neutrons in a nuclear reactor for 10 h. After a 40-min cooling period, the activities for gamma-ray emission were found to be 2542 cpm (counts per minute) for the unknown and 1984 cpm for the standard. What is the %w/w Mn in the unknown steel sample ... 

---