Hydroxyl-terminated polymerization

The post-reaction of a polymer with a chemical substance may result in the formation of a new polymer in which the chemical substance becomes chemically attached to the pre-polymer. In other instances, the post-reactant may not become part of a polymer chain because its role is not to continue propagation of a polymer, but rather to introduce a specific functionality to it. In these cases, it is not appropriate to include the substance as a reactant in the naming of the polymer. For example, when a hydroxyl-terminated polymeric diol is post-reacted with an acid, ester groups are formed which become end-groups of the original pre-polymer. In this case, the term polymer with the acid is not the most appropriate representation. The terms esters with the acid or reaction products with the acid are more appropriate. 

Generation of radicals by redox reactions has also been applied for synthesizing block copolymers. As was mentioned in Section II. D. (see Scheme 23), Ce(IV) is able to form radical sites in hydroxyl-terminated compounds. Thus, Erim et al. [116] produced a hydroxyl-terminated poly(acrylamid) by thermal polymerization using 4,4-azobis(4-cyano pentanol). The polymer formed was in a second step treated with ceric (IV) ammonium nitrate, hence generating oxygen centered radicals capable of starting a second free radical polymeriza-... 

Brosse, J.-C., Derouet, D., Epaillard, F., Soutif, J.-C., Legeay, G. and Dusek, K. Hydroxyl-Terminated Polymers Obtained by Free Radical Polymerization. Synthesis, Characterization, and Applications. Vol. 81, pp. 167—224. 

Block copolymers with materials such as a polyester (PE) (qv) can be prepd by the reaction of diisocyanate-terminated polyesters with hydroxyl-terminated PMMA according to Wilkes and Grezlak (Ref 21). The basic structure was found to be PMMA-PE-FMMA, with a mw of from 7500 to 47000. The purpose of the work was to produce a stronger copolymer (in terms of stress-strain) by tailoring the amt of each monomer used to produce the copolymer Further information on polymerization can be found in Refs 2a 6a... 

Polystyrene-Woc -polysulfone-/ /oc -polystyrene and poly(butyl acrylate)-Woc -polysulfone-/ /oc -poly(butyl acrylate) triblock copolymers were prepared using a macroinitiator.214 The hydroxyl-terminated polysulfone was allowed to react with 2-bromopropionyl bromide, an atomic transfer radical polymerization (ATRP) initiator, in the presence of pyridine. The modified macroinitiator could initiate die styrene polymerization under controlled conditions. 

Recently, Cohn and Salomon synthesized and characterized a series of PLCL thermoplastic bioelastomers by two-step synthesis procedure. First, ring-opening polymerization of L-lactide initiated by the hydroxyl terminal groups of the PCL chain. Second, chain extension polymerization of these PLA-PCL-PLA triblocks initiated by the hexamethylene diisocyanate (HDl). 

The effects of the feed ratio in the lipase CA-catalyzed polymerization of adipic acid and 1,6-hexanediol were examined by using NMR and MALDI-TOF mass spectroscopies. NMR analysis showed that the hydroxyl terminated product was preferentially formed at the early stage of the polymerization in the stoichiometric substrates. As the reaction proceeded, the carboxyl-terminated product was mainly formed. Even in the use of an excess of the dicarboxylic acid monomer, the hydroxy-terminated polymer was predominantly formed at the early reaction stage, which is a specific polymerization behavior due to the unique enzyme catalysis. 

The use of these initiators to polymerize LA814 and methylglycolide815 has been reported to proceed in a well-controlled fashion. Block copolymers such as PCL-b-PLA have also been prepared. Elimination of PrOH from the reaction of (270) with preformed hydroxyl terminated polymers, followed by lactone polymerization, yields diblocks of CL with polystyrene or polybutadiene.816 The preparation of an ABA triblock has also been reported (A = CL, B = LA) since propagating chains of PLA do not initiate CL ring opening, (270) was pretreated with hydroxy terminated (PCL-b-PLA)-OH 814... 

The cationic ring-opening polymerization of epichlorohydrin in conjunction with a glycol or water as a modifier produced hydroxyl-terminated epichlorohydrin (HTE) liquid polymers (1-2). Hydroxyl-terminated polyethers of other alkylene oxides (3 4), oxetane and its derivatives (5 6), and copolymers of tetrahydrofuran (7-15) have also been reported. These hydroxyl-terminated polyethers are theoretically difunctional and used as reactive prepolymers. 

An existing polymer with an appropriate end group can be reacted with an alkoxyamine for instance, alkoxide polymerization of ethylene oxide yields a hydroxyl-terminated polymer that undergoes substitution (in the presence of sodium hydride) with a halogen-containing alkoxyamine. 

Copolymers. Copolymers from mixtures of different bisphenols or from mixtures of dichlorosulfone and dichlorobenzophenone have been reported in the patent literature. Bifunctional hydroxyl-terminated polyethersulfone oligomers are prepared readily by the polyetherification reaction simply by providing a suitable excess of the bisphenol. Block copolymers are obtained by reaction of the oligomers with other polymers having end groups capable of reacting with the phenol. Multiblock copolymers of BPA-polysulfone with polysiloxane have been made in this way by reaction with dimethyl amino-terminated polydimethylsiloxane the products are effective impact modifiers for the polyethersulfone (79). Block copolymers with nylon-6 are obtained when chlorine-terminated oligomers, which are prepared by polyetherification with excess dihalosulfone, are used as initiators for polymerization of caprolactam (80). 

The polymerization of dimethylsulfoxonium methylide (17) initiated by trialkylborane, which Shea et al. developed, is classified as the first category. Propagation involves insertion of 17 into the terminal C-B bond with elimination of DMSO. The polymerization was carried out in toluene at 70-80 °C, followed by oxidative workup to yield hydroxyl-terminated polymethylene (Scheme 71). The Mn values were very close to the calculated values from the feed ratio of 17 to trialkylborane, and the Mw/Mn ratio ranged from 1.04 to 1.17. These results are consistent with the character of living polymerization. 

The synthetic procedure of PE-fo-PCL using hydroxyl terminated polyethylene was reported [39]. Terminally hydroxylated polyethylene was prepared during a metallocene-catalyzed polymerization using controlled chain transfer reaction with alkylaluminum compounds. PE-fo-PCL block copolymer was synthesized from terminally hydroxylated PE and e-caprolactone (e-CL) using Sn(Oct)2 as a catalyst for ring opening polymerization. 

---