Hydrogenation acyl halides

Important steps in the reaction are formation of an acyl halide and the enol derived from the acyl halide. The acyl halide is key because carboxylic adds do not form enols readily since the carboxylic acid proton is removed before the a hydrogen. Acyl halides lack the carboxylic acid hydrogen. 

The Pd-catalyzed hydrogenoiysis of acyl chlorides with hydrogen to give aldehydes is called the Rosenmund reduction. Rosenmund reduction catalyzed by supported Pd is explained by the formation of an acylpalladium complex and its hydrogenolysis[744]. Aldehydes can be obtained using other hydrides. For example, the Pd-catalyzed reaction of acyl halides with tin hydride gives aldehydes[745]. This is the tin Form of Rosenmund reduction. Aldehydes are i ormed by the reaction of the thio esters 873 with hydrosilanes[746,747]. 

The reaction of benzoyl chloride with (Me3Si)2 affords benzoyltrimethylsi-lane (878)[626,749,750]. Hexamethyldigermane behaves similarly. The siloxy-cyclopropane 879 forms the Pd homoenolate of a ketone and reacts with an acyl halide to form,880. The 1,4-diketone 881 is obtained by reductive elimination of 880 without undergoing elimination of /7-hydrogen[751]. 

The reduction of acyl halides with hydrogen to form aldehydes using Pd catalyst is well known as the Rosenmund reduction[756]. Some acyl chlorides give decarbonyiation products rather than aldehydes under Rosenmund conditions. The diene 890 was obtained by decarbonyiation in an attempted Rosenmund reduction of acetyloleanolic acid chloride (889)[757], Rosenmund reduction of sterically hindered acyl chlorides such as diphenyl- and tnpheny-lacetyl chloride (891) gives the decarbonylated products 892[758],... 

With Acyl Halides, Hydrogen Halides, and Metallic Halides. Ethylene oxide reacts with acetyl chloride at slightly elevated temperatures in the presence of hydrogen chloride to give the acetate of ethylene chlorohydrin (70). Hydrogen haUdes react to form the corresponding halohydrins (71). Aqueous solutions of ethylene oxide and a metallic haUde can result in the precipitation of the metal hydroxide (72,73). The haUdes of aluminum, chromium, iron, thorium, and zinc in dilute solution react with ethylene oxide to form sols or gels of the metal oxide hydrates and ethylene halohydrin (74). 

In the first step, 2-chloro-4-aminobenzoyl chloride hydrochloride is prepared by refluxing a mixture of 25 cc of purified thionyl chloride and 10 g of 2-chloro-4-aminobenzoic acid until all of the solid has gone into solution. To the cooled solution is added 150 cc of dry ethyl ether. A brisk stream of dry hydrogen chloride is passed into the solution until the precipitation of 2-chloro-4-aminobenzoyl chloride hydrochloride is complete. The acyl halide is removed by filtration and dried in a vacuum desiccator. 

In the course of this study, the authors determined /Lvalues for dibenzyl, methyl phenyl, methyl p-nitrophenyl, di-p-tolyl, di-isopropyl and tetramethylene sulphoxides and for diethyl, dipropyl and dibutyl sulphites. The /Lscales are applied to the various reactions or the spectral measurements. The /Lscales have been divided into either family-dependent (FD) types, which means two or more compounds can share the same /Lscale, family-independent (FI) types. Consequently, a variety of /Lscales are now available for various families of the bases, including 29 aldehydes and ketones, 17 carboxylic amides and ureas, 14 carboxylic acids esters, 4 acyl halides, 5 nitriles, 10 ethers, 16 phosphine oxides, 12 sulphinyl compounds, 15 pyridines and pyrimidines, 16 sp3 hybridized amines and 10 alcohols. The enthalpies of formation of the hydrogen bond of 4-fluorophenol with both sulphoxides and phosphine oxides and related derivatives fit the empirical equation 18, where the standard deviation is y = 0.983. Several averaged scales are shown in Table 1588. 

Hydrolysis of acyl halides is not usually catalyzed by acids, except for acyl fluorides, where hydrogen bonding can assist in the removal of There are several methods available for the hydrolysis of acyl fluorides. ... 

Sulfonic esters are most frequently prepared by treatment of the corresponding halides with alcohols in the presence of a base. The method is much used for the conversion of alcohols to tosylates, brosylates, and similar sulfonic esters. Both R and R may be alkyl or aryl. The base is often pyridine, which functions as a nucleophilic catalyst, as in the similar alcoholysis of carboxylic acyl halides (10-21). Primary alcohols react the most rapidly, and it is often possible to sulfonate selectively a primary OH group in a molecule that also contains secondary or tertiary OH groups. The reaction with sulfonamides has been much less frequently used and is limited to N,N-disubstituted sulfonamides that is, R" may not be hydrogen. However, within these limits it is a useful reaction. The nucleophile in this case is actually R 0 . However, R" may be hydrogen (as well as alkyl) if the nucleophile is a phenol, so that the product is RS020Ar. Acidic catalysts are used in this case. Sulfonic acids have been converted directly to sulfonates by treatment with triethyl or trimethyl orthoformate HC(OR)3, without catalyst or solvent and with a trialkyl phosphite P(OR)3. ... 

In an indirect amination process, acyl halides are converted to amino acids. Reaction of the acyl halide with a chiral oxazolidinone leads to a chiral amide, which reacts with the N=N unit of a dialkyl azodicarboxylate [R"02C—N=N—CO2R ]. Hydrolysis and catalytic hydrogenation leads to an amino acid with good enantioselectivity. ... 

Ion 21 can either lose a proton or combine with chloride ion. If it loses a proton, the product is an unsaturated ketone the mechanism is similar to the tetrahedral mechanism of Chapter 10, but with the charges reversed. If it combines with chloride, the product is a 3-halo ketone, which can be isolated, so that the result is addition to the double bond (see 15-45). On the other hand, the p-halo ketone may, under the conditions of the reaction, lose HCl to give the unsaturated ketone, this time by an addition-elimination mechanism. In the case of unsymmetrical alkenes, the attacking ion prefers the position at which there are more hydrogens, following Markovnikov s rule (p. 984). Anhydrides and carboxylic acids (the latter with a proton acid such as anhydrous HF, H2SO4, or polyphosphoric acid as a catalyst) are sometimes used instead of acyl halides. With some substrates and catalysts double-bond migrations are occasionally encountered so that, for example, when 1 -methylcyclohexene was acylated with acetic anhydride and zinc chloride, the major product was 6-acetyl-1-methylcyclohexene. ... 

Wilkinson s catalyst has also been reported to decarbonylate aromatic acyl halides at 180°C (ArCOX ArX). This reaction has been carried out with acyl iodides, bromides, and chlorides. Aliphatic acyl halides that lack an a hydrogen also give this reaction, but if an a hydrogen is present, elimination takes place instead (17-16). Aromatic acyl cyanides give aryl cyanides (ArCOCN—> ArCN). Aromatic acyl chlorides and cyanides can also be decarbonylated with palladium catalysts. °... 

Ketenes can be prepared by treatment of acyl halides with tertiary amines. The scope is broad, and most acyl halides possessing an a hydrogen give the reaction, but if at least one R is hydrogen, only the ketene dimer, not the ketene, is isolated. However, if it is desired to use a reactive ketene in a reaction with a given compound, the ketene can be generated in situ in the presence of the given compound. ... 

Reaction between acyl halides and active hydrogen compounds... 

Reaction between alkyl or acyl halides and hydrogen peroxide... 

Halogenation of alkenyl organometallic compounds Addition of hydrogen halides to triple bonds Halogenation of alkynes or allenes Addition of alkyl halides to triple bonds Addition of acyl halides to triple bonds... 

Hydrotreating has been proposed by Arbokem Inc. in Canada as a means of converting Grade Tall Oil into biofuels and fuel additives. However, this process is a hydrogenation process which produces hydrocarbons rather than biodiesel. Recently a process for making biodiesel from crude tall oil has been proposed. It relies on the use of an acid catalysts or of an acyl halide for the esterification reaction, but no information is given on the properties of this fuel, particularly concerning the oxidative stability. 

Anderson, L. R. et al., J. Fluorine Chem., 1976, 7, 481-500 Five derivatives, including the 0-0 lithium or sodium salts of the hydrogen peroxide adduct of hexafluoroacetone (2-hydroxyhexafluoro-2-propyl hydroperoxide), and their reaction products with acyl halides, are less flammable or explosive than their hydrocarbon analogues, though less stable than the parent hydroperoxides. Relevant entries are ... 

---