Hydrogen peroxide-metal catalysts

Hydrogen peroxide decomposition catalysts can be added to ionomer membranes in small amounts to slow down the decomposition of the ionomer during fuel cell operation. Additions of cerium and manganese, in both oxide and ionic forms, have been shown to increase the oxidative stability of membranes by orders of magnitude, and fuel cells prepared with such membranes have shown substantial increases in hfetime under aggressive hot and dry operation [60-62]. Unfortunately, these metal ions and oxides can consume ion exchange capacity and negatively impact fuel cell performance. 

Another possible route to 2-unsubstituted thiazoles is replacement of a mercapto group by a hydrogen. Various methods have been used hydrogen peroxide in acid medium (17-19) dilute nitric acid (17), and metallic catalysts (20-22). 

Hydrogen peroxide may react directiy or after it has first ionized or dissociated into free radicals. Often, the reaction mechanism is extremely complex and may involve catalysis or be dependent on the environment. Enhancement of the relatively mild oxidizing action of hydrogen peroxide is accompHshed in the presence of certain metal catalysts (4). The redox system Fe(II)—Fe(III) is the most widely used catalyst, which, in combination with hydrogen peroxide, is known as Fenton s reagent (5). 

The mechanism and rate of hydrogen peroxide decomposition depend on many factors, including temperature, pH, presence or absence of a catalyst (7—10), such as metal ions, oxides, and hydroxides etc. Some common metal ions that actively support homogeneous catalysis of the decomposition include ferrous, ferric, cuprous, cupric, chromate, dichromate, molybdate, tungstate, and vanadate. For combinations, such as iron and... 

The observation that addition of imidazoles and carboxylic acids significantly improved the epoxidation reaction resulted in the development of Mn-porphyrin complexes containing these groups covalently linked to the porphyrin platform as attached pendant arms (11) [63]. When these catalysts were employed in the epoxidation of simple olefins with hydrogen peroxide, enhanced oxidation rates were obtained in combination with perfect product selectivity (Table 6.6, Entry 3). In contrast with epoxidations catalyzed by other metals, the Mn-porphyrin system yields products with scrambled stereochemistry the epoxidation of cis-stilbene with Mn(TPP)Cl (TPP = tetraphenylporphyrin) and iodosylbenzene, for example, generated cis- and trans-stilbene oxide in a ratio of 35 65. The low stereospecificity was improved by use of heterocyclic additives such as pyridines or imidazoles. The epoxidation system, with hydrogen peroxide as terminal oxidant, was reported to be stereospecific for ris-olefins, whereas trans-olefins are poor substrates with these catalysts. 

---