Hydrides reaction with amides

The formation of the above anions ("enolate type) depend on equilibria between the carbon compounds, the base, and the solvent. To ensure a substantial concentration of the anionic synthons in solution the pA" of both the conjugated acid of the base and of the solvent must be higher than the pAT -value of the carbon compound. Alkali hydroxides in water (p/T, 16), alkoxides in the corresponding alcohols (pAT, 20), sodium amide in liquid ammonia (pATj 35), dimsyl sodium in dimethyl sulfoxide (pAT, = 35), sodium hydride, lithium amides, or lithium alkyls in ether or hydrocarbon solvents (pAT, > 40) are common combinations used in synthesis. Sometimes the bases (e.g. methoxides, amides, lithium alkyls) react as nucleophiles, in other words they do not abstract a proton, but their anion undergoes addition and substitution reactions with the carbon compound. If such is the case, sterically hindered bases are employed. A few examples are given below (H.O. House, 1972 I. Kuwajima, 1976). 

Reaction with ammonia and amines (Section 20 14) Acid an hydrides react with ammonia and amines to form amides Two molar equivalents of amine are required In the example shown only one acyl group of acetic anhydride becomes incor porated into the amide the other becomes the acyl group of the amine salt of acetic acid... 

Heterocyclic structures analogous to the intermediate complex result from azinium derivatives and amines, hydroxide or alkoxides, or Grignard reagents from quinazoline and orgahometallics, cyanide, bisulfite, etc. from various heterocycles with amide ion, metal hydrides,or lithium alkyls from A-acylazinium compounds and cyanide ion (Reissert compounds) many other examples are known. Factors favorable to nucleophilic addition rather than substitution reactions have been discussed by Albert, who has studied examples of easy covalent hydration of heterocycles. 

Alteration of the relative reactivity of the ring-positions of quinoline is expected and observed when cyclic transition states can intervene. Quinoline plus phenylmagnesium bromide (Et20,150°, 3 hr) produces the 2-phenyl derivative (66% yield) phenyllithium gives predominantly the same product along with a little of the 4-phenylation product. Reaction of butyllithium (Et 0, —35°, 15 min) forms 2-butylquinoline directly in 94% yield. 2-Aryl- or 6-methoxy-quinolines give addition at the 2-position with aryllithium re-agents, and reaction there is so favored that appreciable substitution (35%) takes place at the 2-position even in the 4-chloroquinoline 414. Hydride reduction at the 2-position of quinoline predominates. Reaction of amide ion at the 2-position via a cyclic... 

On treatment with a strong base such as sodium hydride or sodium amide, dimethyl sulfoxide yields a proton to form the methylsulfinyl carbanion (dimsyl ion), a strongly basic reagent. Reaction of dimsyl ion with triphenylalkylphosphonium halides provides a convenient route to ylides (see Chapter 11, Section III), and with triphenylmethane the reagent affords a high concentration of triphenylmethyl carbanion. Of immediate interest, however, is the nucleophilic reaction of dimsyl ion with aldehydes, ketones, and particularly esters (//). The reaction of dimsyl ion with nonenolizable ketones and... 

Reaction with water to yield a carboxylic acid Reaction with an alcohol to yield an ester Reaction with ammonia or an amine to yield an amide Reaction with a hydride reducing agent to yield an aldehyde or an alcohol... 

Secondary amides can be alkylated on nitrogen by using sodium hydride for deprotonation, followed by reaction with an alkyl halide.62... 

The electrophilicity of alane is the basis for its selective reaction with the amide group. Alane is also useful for reducing azetidinones to azetidines. Most nucleophilic hydride reducing agents lead to ring-opened products. DiBAlH, A1H2C1, and A1HC12 can also reduce azetinones to azetidines.100... 

In this series, too, replacement of the N-methyl by a group such as cyclopropylmethyl leads to a compound with reduced abuse potential by virtue of mixed agonist-antagonist action. To accomplish this, reduction of 24 followed by reaction with tertiary butylmagnesium chloride gives the tertiary carbinol 27. The N-methyl group is then removed by the classic von Braun procedure. Thus, reaction with cyanogen bromide leads to the N-cyano derivative (28) hydrolysis affords the secondary amine 29. (One of the more efficient demethylation procedures, such as reaction with ethyl chloroformate would presumably be used today.) Acylation with cyclopropylcarbonyl chloride then leads to the amide 30. Reduction with lithium aluminum hydride (31) followed by demethylation of the phenolic ether affords buprenorphine (32).9... 

Enantiospecific syntheses of amino derivatives of benzo[ ]quinolizidine and indolo[2,3- ]quinolizidine compounds have also been achieved via A-acyliminium ion cyclization reactions, as an alternative to the more traditional Bischler-Napieralski chemistry (see Section 12.01.9.2.2). One interesting example involves the use of L-pyroglutamic acid as a chiral starting material to construct intermediates 240 via reaction with arylethylamine derivatives. Diisobutylaluminium hydride (DIBAL-H) reduction of the amide function in 240 and subsequent cyclization and further reduction afforded piperidine derivatives 241, which stereoselectively cyclized to benzo[ ]quinolizidine 242 upon treatment with boron trifluoride (Scheme 47) <1999JOC9729>. 

For the primary and secondary a-alkoxy radicals 24 and 29, the rate constants for reaction with Bu3SnH are about an order of magnitude smaller than those for reactions of the tin hydride with alkyl radicals, whereas for the secondary a-ester radical 30 and a-amide radicals 28 and 31, the tin hydride reaction rate constants are similar to those of alkyl radicals. Because the reductions in C-H BDE due to alkoxy, ester, and amide groups are comparable, the exothermicities of the H-atom transfer reactions will be similar for these types of radicals and cannot be the major factor resulting in the difference in rates. Alternatively, some polarization in the transition states for the H-atom transfer reactions would explain the kinetic results. The electron-rich tin hydride reacts more rapidly with the electron-deficient a-ester and a-amide radicals than with the electron-rich a-alkoxy radicals. 

When the carbonyl compound is added to this base, abstraction of a proton and formation of the enolate anion follow, as seen with sodinm hydride or sodium amide above. Again, this reaction is essentially irreversible because the other product is the weak base diisopropylamine (pATa 36). So far, there does not seem any particular advantage in nsing LDA rather than sodium hydride or sodium amide. 

A number of organic species, including amides, oximes, and nitriles, undergo reductive amination, a variety of reduction reactions that produce cimines. In general, these processes involve imines, R=N-R, or related species. Reduction processes include hydrogenation using Raney nickel as the catalyst (for nitriles), the reaction with sodium/EtOH (for oximes), and the use of lithium aluminum hydride, LiAlH (for amides or nitriles). Figure 13-16 illustrates the preparation of amphetamine by reductive amination. 

---