High applications

Deflagration venting (see NFPA 68) is highly applicable to powder operations. This is because most powder operations are at atmospheric pressure, the rate of deflagration pressure rise is usually small enough for vent relief panels to be of a practical size, and the subsequent fire is limited because most powders cannot bum in bulk. 

Some areas of digital computer use that are highly applicable to the engineering field include... 

Nitrite-based programs require a relatively high application rate to ensure that all anodic areas within the system are fully protected from the risk of pitting corrosion. Undertreatment exposes anodic areas, which are subject to localized pitting as a result of the concentrating power from surrounding cathodic sites. 

Microwave heating is often applied to already known conventional thermal reactions in order to accelerate the reaction and therefore to reduce the overall process time. When developing completely new reactions, the initial experiments should preferably be performed only on a small scale applying moderately enhanced temperatures to avoid exceeding the operational limits of the instrument (temperature, pressure). Thus, single-mode reactors are highly applicable for method development and reaction optimization. 

The successfully generated chalcones could be cleaved by treatment with trifluoro-acetic acid or used for the subsequent synthesis of pyrimidines [45], Condensation of the polymer-bound chalcones with benzamidine hydrochloride under microwave irradiation for 30 min furnished the corresponding pyrimidines in good yields after TFA-induced cleavage. This new robust support/linker system for SPOT synthesis has been demonstrated to be compatible with a range of organic reactions and highly applicable for microwave conditions. 

Calcium sulfate Low/fast/high Applicable in most situations... 

Flame photometry is the name given to the technique that measures the intensity of the light emitted by analyte atoms in a flame. It is the oldest of all the atomic techniques. It is not highly applicable because of the low temperature of the flame. Only a handful of elements can be measured with this technique, including sodium, potassium, lithium, calcium, strontium, and barium. The technique was formerly used... 

Chemical research in general and polymer research in particular are highly application-oriented, concerned with quotidian problem-solving, and the generation of production processes leading to the improvement of products. In the polymer area, there is not much theoretical work, and there is no basic research in the sense we know it. Synthetic polymer work in China is highly... 

The reason for this is that if a stable, optically transparent emulsion is to be obtained, the relationship between the amount of the oil phase and the surfactants has to be within a relatively narrow range. Microemulsion elec-trokinetic chromatography has been shown to be a highly applicable technique for the analysis of complex mixtures such as multicomponent formulations and drug-related impurities. This technique opens a new way to determine water-insoluble neutral species such as steroids, which are difficult to analyze by CE. It is therefore likely that the MEEKC method will be increasingly applied for pharmaceutical and biopharmaceutical analyses in coming years. 

In the same regard, PPCP introductions through manure and biosolids that are applied to arable land is enhanced by the typically high application rates of these forms of crop fertilizers rates that are usually higher than the crop needs (Kumar et al., 2005). It is recommended that manure and biosolids application rates be based on the nutrient requirements of the intended crop so as to minimize the unintended introduction of these micropollutants into the food chain at levels that can be avoided. 

The enolate ions of acetoacetic ester and other active methylene compounds react with 0-propiolactone to give the ethoxycarbonyl derivative, but the yields are generally not high. Application of this reaction to 2-ethoxycarbonyldodecanone (equation 53) has been recently patented, with the product reported to be a useful perfume intermediate (77JAP(K)77133952). The reaction is used quite widely with diketene, which gives C-acylation rather than alkylation of the enolate ion, followed by cyclization (72CPB1574). 

CH 40 400 High application coating printing textured products... 

Due to high application levels of plasticizers, their behavior with respect to environmental influences (weathering resistance) and impact on the polymer matrix (effect on optical properties or plastics lifetime) have to be tested. 

---