Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Hard hat safety

Coverahs or other full-body clothing should be worn when working with lead ahoys and properly laundered after use. Hard hats, safety glasses, safety boots, and other safety equipment should be worn as appropriate for the industrial environment where the lead ahoys are used. Hands, face, neck, and arms should be washed before eating or smoking. [Pg.62]

Safety clothing hard hats, safety glasses etc. [Pg.262]

The word safety used to mean the older strategy of accident prevention through the use of hard hats, safety shoes, and a variety of rules and regulations. The main emphasis was on worker safety. Much more recently, safety has been replaced by loss prevention. This term includes hazard identification, technical evaluation, and the design of new engineering features to prevent loss. The subj ect of this text is loss prevention, but for convenience, the words safety and loss prevention will be used synonymously throughout. [Pg.2]

Occupational safety, sometimes referred to as hard-hat safety, covers topics such as vessel entry, vehicle movement, protective clothing, and tripping hazards. [Pg.4]

Safety policies. This will be concerned principally with occupational or hard hat safety. [Pg.373]

Has adequate PPE, e.g. hard hats, safety boots, overalls, gloves, dust/vapour masks, life-jackets, buoyancy aids, immersion suits, goggles, ear protection and wet weather gear been provided ... [Pg.134]

Consumables and Sipplies - There are two items to consider under this cost category. The first is health and safety gear which include hard hats, safety glasses, respirators and cartridges, protective clothing, gloves, safety boots, and a photoionization detector monitor, all estimated at l,500/person. For two people this totals 3,(XX),... [Pg.188]

Put on all required safety equipment, then report to job location. Contact By Forklifts/Blind Corners Foot-Level Fall Oil, water, or trash on floor. When going anywhere in the mill, always walk to one side of pathways. Look before rounding corners. Avoid wet oily spots. Pick up or step over trash or bunks. If your shoes/boots get slippery, clean them. Hard hat Safety glasses Steel-toed boots Hearing Protection Gloves Lock-outtags... [Pg.210]

Press the hose end and the Coupling Press. Caught In Your hand can be crushed if the press starts. Move hand away from the ram and hose, then start the press. Hard hat Safety glasses Steel-toed boots Earplugs Lock-out tags... [Pg.211]

Whether you are doing the cutting or assisting, wear appropriate personal protective equipment a hard hat, safety glasses, work gloves, steel-toe safety shoes, and if necessary, a respirator. [Pg.38]

Most utilities employ mobile cranes in their regular heavy-duty construction and repair operations. Mobile cranes are responsible for the most accidents, iiyuries, and fatalities of all of the crane types. If you use mobile cranes, you need to be aware of the potential work hazards, get the proper training regarding operation and load preparation, and know the proper personal protective equipment (PPE) for your crews such as hard hats, safety boots, and high-visibility clothing. [Pg.59]

Personal Protective Equipment (PPE) includes a variety of devices and garments to protect workers from injuries. You can find PPE designed to protect the eyes, face, head, ears, feet, hands and arms, and the whole body. PPE includes such items as goggles, face shields, safety glasses, hard hats, safety shoes, gloves, vests, earplugs, earmuffs, and suits for full-body protection. [Pg.11]

Do powder-actuated tool operators have and use appropriate PPE, such as hard hats, safety goggles,... [Pg.178]

Personal Protective Equipment Hard hats, safety glasses, safety shoes, respirators, hearing protection, gloves. [Pg.325]

Each powder-actuated tool must be stored in its own locked container when not being used. A sign at least 7 inches by 10 inches with bold face type reading POWDER-ACTUATED TOOL IN USE should be posted conspicuously when the tool is being used. Powder-actuated tools are to be left unloaded until they are actually ready to be used. Powder-actuated tools need to be inspected for obstractions or defects each day before use. Their operators should have and use appropriate personal protective equipment such as hard hats, safety goggles, safety shoes, and ear protectors. [Pg.392]

Occupational Safety — sometimes referred to as personal or hard hat safety — is concerned with events that result from unsafe acts or conditions, and that generally affect only one person, or a small group. It covers topics such as vessel entry, vehicle movement, protective clothing and tripping hazards. Process safety. [Pg.91]

Personal protective equipment as required per area procedure (e.g., safety glasses, hard hat, safety shoes)... [Pg.68]


See other pages where Hard hat safety is mentioned: [Pg.199]    [Pg.199]    [Pg.199]    [Pg.147]    [Pg.82]    [Pg.452]    [Pg.107]    [Pg.278]    [Pg.225]    [Pg.108]    [Pg.126]    [Pg.42]    [Pg.326]    [Pg.645]   


SEARCH



HAT

© 2024 chempedia.info