Halogenated compounds, carbonylation

MRH Bromine 1.21/91, carbon tetrachloride 2.89/83, chlorine 3.85/82 Silane burns in contact with bromine, chlorine or covalent chlorides (carbonyl chloride, antimony pentachloride, tin(IV) chloride, etc.) [1], Extreme caution is necessary when handling silane in systems with halogenated compounds, as a trace of free halogen may cause violent explosions [2],... 

Types of compounds are arranged according to the following system hydrocarbons and basic heterocycles hydroxy compounds and their ethers mercapto compounds, sulfides, disulfides, sulfoxides and sulfones, sulfenic, sulfinic and sulfonic acids and their derivatives amines, hydroxylamines, hydrazines, hydrazo and azo compounds carbonyl compounds and their functional derivatives carboxylic acids and their functional derivatives and organometallics. In each chapter, halogen, nitroso, nitro, diazo and azido compounds follow the parent compounds as their substitution derivatives. More detail is indicated in the table of contents. In polyfunctional derivatives reduction of a particular function is mentioned in the place of the highest functionality. Reduction of acrylic acid, for example, is described in the chapter on acids rather than functionalized ethylene, and reduction of ethyl acetoacetate is discussed in the chapter on esters rather than in the chapter on ketones. 

Mo and W hexacarbonyls, Mo(CO)6 and W(CO)6, alone do not induce polymerization of acetylenic compounds. However, UV irradiation toward these catalysts in the presence of halogenated compounds can form active species for polymerization of various substituted acetylenes. Carbon tetrachloride, CCI4, when used as the solvent for the polymerization, plays a very important role for the formation of active species, and thus cannot be replaced by toluene that is often used for metal chloride-based catalysts. Although these metal carbonyl-type catalysts are less active compared to the metal halide-based counterparts, they can provide high MW polymers. It is a great advantage that the metal carbonyl catalysts are very stable under air and thus handling is much easier. 

Carbon tetrachloride commonly was employed as a cleaning solvent, although its considerable toxicity entails considerable hazard when used indiscriminately. It has been used as a fire-extinguishing fluid for petroleum fires, but its toxicity and tendency to form still more toxic carbonyl dichloride makes it undesirable for confined areas. The common laboratory practice of removing traces of water from solvents with metallic sodium should not be applied to halogenated compounds carbon tetrachloride-sodium mixtures are shock sensitive and can detonate. 

Reaction XLIII. (c) Condensation of a-Halogen Fatty Acid Esters with Aldehydes and Ketones by means of Zinc or Magnesium (Reformatsky-Grignard). (C., (1901), I., 1196 II., 30 (1902), I., 856.)—This is an extension of the Grignard and zinc alkyl reactions which enables a-halogen esters to be condensed with carbonyl compounds as if they were simple alkyl halogen compounds. The zinc or magnesium alkyl derivative is neither prepared beforehand nor isolated in the reaction, but there is little doubt that some such compound is transitorily formed. Zinc is the metal... 

Reaction XLIV. (b) Condensation of Alkyl and Aryl Halogen Compounds with the Sodio- and other Metallo-derivatives of Ethyl Aceto-acetate and its Homolognes. (A., 186, 214 201, 143 213, 143.)—Like malonic ester, acetoacetic ester contains two 1 3-carbonyl groups with a methylene group in position 2. It is only to be expected then that it yields with metallic sodium or sodium alcoholate sodio-derivatives from which mono- and di-, alkyl and aryl homologues can be obtained by treatment with a suitable halide, including halogen esters. Acetoacetic acid... 

Other compounds used for replacing hydroxyl by halogen are carbonyl chloride, benzenesulphonyl chloride and sulphuryl chloride. 

This cyclization is a reaction developed by Mori, who carried out a series of investigations with tin reagent 33. Fluoride is a much more reactive anion for initiation than any of the other halides, although it often leads to decomposition of the starting materials. In the case of vinylic or aryl halogen compounds the iodides are easier to transform than the bromides, and chlorides are unrcactive. The carbonyl group can be derived from either an aldehyde or a ketone, and even esters are sufficiently electrophilic.22... 

A similar catalytic procedure for enantioselective formation of C-Br and C-Cl bonds has been reported recently by the Lectka group [83]. The concept of this a-halogenation of carbonyl compounds is tandem asymmetric halogenation and esterification (Scheme 3.28). Inexpensive acyl halides, 74, are used as starting... 

---