Halides sodium periodate

Many classical oxidations are frequently performed in aqueous media, using oxidants such as potassium permanganate, sodium periodate, or sodium or calcium hypochlorite (Hudlicky, 1990). Cyclohexene can now be oxidized directly to colorless crystalline adipic acid with aqueous 30 percent hydrogen peroxide under organic solvent-and halide-free conditions, as discussed earlier (Sato et al., 1998) (see fig. 6.1). 

Oxidation of the heterocycles with common reagents such as MCPBA, sodium periodate or hydrogen peroxide cleanly affords the sulfoxides and sulfones, and it is clear that the sulfur atom is the principal centre of reaction for electrophiles. While the sulfone is a quite inert functionality, the sulfoxides may be reduced to the sulfides with phosphorus pen-tasulfide as for the tetrahydro systems (78CJC1423). Positive halogen sources likewise react at sulfur, and the intermediate sulfonium halide rearranges, usually by 1,2-shift to the a-halo product. 

When primary alkyl phenyl tellurium or secondary alkyl phenyl tellurium compounds in methanol were treated with an excess of 3-chloroperoxybenzoic acid at 20, the phenyltelluro group was eliminated and replaced by a methoxy group. This reaction, which converts alkyl halides used in the synthesis of alkyl phenyl telluriums to alkyl methyl ethers, produced the ethers in yields as high as 90%3-4 Olefins are by-products in these reactions4 With ethanol as the solvent, ethyl ethers were formed. Other oxidizing agents (hydrogen peroxide, ozone, (ert.-butyl hydroperoxide, sodium periodate) did not produce alkyl methyl ethers. 

Allyl phenyl telluriums, prepared from allyl halides and benzenetellurolate, experience oxidative cleavage of the allyl group when treated with hydrogen peroxide, tcrr.-butyl hydroperoxide, sodium periodate, oxygen, or air The allyl group is converted to unsaturated alcohols, aldehydes, and ketones. Before elimination from the molecule the phenyltelluro group is probably oxidized to a telluroxide or a tellurinic ester ... 

Selenoxide elimination occurs under relatively mild conditions in comparison to the elimination reactions described above. Selenoxides undergo spontaneous yn-elimi-nation at room temperature or below and thus have been used for the preparation of a variety of unsaturated compounds. The selenide precursors can be obtained by displacement of halides or sulfonate esters with PhSeNa. Oxidation of the selenides with hydrogen peroxide or tert-huiyX hydroperoxide, sodium periodate, or peroxycar-boxylic acids furnishes the corresponding selenoxides. Their eliminations usually favor formation of the less substituted olefin in the absence of heteroatom substituents or delocalizing groups. Since selenium compounds are toxic, they should be handled with care. 

Conversion of ketones into a,(3-unsaturated ketones has been effected by bromination-dehydrobromination, although a better method involves a-phenyl-seleno ketones as intermediates. These are normally obtained by reaction of the enolate of the ketone with a phenylselenyl halide or diphenyl diselenide at low temperature. Oxidation with hydrogen peroxide, sodium periodate or other oxidant gives the selenoxide which immediately undergoes syn p-elimination to form the a, -unsaturated ketone. The process is tolerant of many functional groups, such as... 

The sodium periodate-mediated oxidation of alkali halides is a useful method to accomplish the halogenation of aromatic compounds. Accordingly, NaCl is successfully employed as a chlorine source for the chlorination of various aromatic compounds, although mixtures of regioisomers are sometimes obtained on the other hand, the related sodium periodate-mediated bromina-tion reaction, which uses lithium bromide or sodium bromide as halogen source, affords the expected brominated products in a regioselective fashion (eq 33). ... 

Primary and secondary halides are oxidized to the corresponding aldehydes or ketones, respectively, in good yields and short reaction times using sodium periodate in DMF at reflux (eq 35). In an interesting result, a one carbon moiety is lost whenphenacyl bromide furnishes benzaldehyde as a single isolated product un-... 

An oxidative cleavage of cycloalkanones to unsaturated aldehyde-esters has been developed. Thus, for example, cyclononanone was converted into 2,2-dithio-trimethylenecyclononanone, which was cleaved using lead(iv) acetate (66 %), and the product so obtained treated with methanol and sodium periodate to give (208 in = 5). Cyclododecanone was similarly converted into (208 n = 8). 1,2-Bis(trimethyl-silyloxy)cycloalkenes, prepared by acyloin condensations, have been converted into 2-alkyl-2-hydroxycycloalkanones by treatment with methyl-lithium and an alkyl halide, and the oximes of these a-hydroxyketones cleaved to give open-chain co-cyanoketones using mesyl chloride-pyridine. ... 

Homologation of All l Halides. Carbanion (1) serves as an acylsilane anion equivalent in reactions with alkyl halides. The alkylation proceeds smoothly at —40 °C in the presence of HMPA to provide 0,5-acetals which are easily transformed into acylsi-lanes via oxidation with sodium periodate in wet dioxane (eq 8). Acetalization of acylsilanes gives a-trimethylsUyl acetals, which are orthoester synthetic equivalents (eq 9). The synthesis of iso-carbacyclin was achieved by using this procedure. 

Dimethylsulfoxide Acyl and aryl halides, boron compounds, bromomethane, nitrogen dioxide, magnesium perchlorate, periodic acid, silver difluoride, sodium hydride, sulfur trioxide... 

Reaction with Alkyl Halides The gas inlet tube is replaced by an addition funnel, and 10 ml of HMPT is added rapidly with stirring. The mixture is cooled to 10-15°, and a solution of the alkyl halide (0.1 mole) in 20 ml of THF is added dropwise over a period of 30-40 minutes. The mixture is then heated to 40° for 2-3 hours. The thick white suspension of the sodium halide is cooled and dilute cold hydrochloric acid is carefully added until the mixture is clear. The organic layer is separated, and the aqueous layer is extracted three times with 20-ml portions of ether, the ethereal extracts then being combined with the organic material. The ethereal solution is washed twice with saturated sodium chloride solution and dried. The ether and THF are removed under reduced pressure (rotary evaporator), and the alkyne is distilled. 

The appearance of turbidity indicates saturation of alkyl halide. In this way both sodium thiosulfate and 2-bromopropane are nearly in a one-phase system, thus shortening significantly the heating period. Furthermore, the competitive hydrogen bromide elimination and the ensuing acid-promoted decomposition of thiosulfate into sulfur and sulfur dioxide are minimized, the checkers added 300 ml. of water over a period of 90 minutes. 

---