Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Ground rubber

J. R. Sammgard, Ground Rubber and Civil Engineering Marketsfor Scrap Tires, Aug. 1994. [Pg.21]

Physical Properties of the 60-40 Rubber-Plastic Blends Containing Ground Rubber Tire and Maleated-CRT... [Pg.117]

Amit Kumar Naskar A.K., De S.K., and Bhowmick A.K., 2001, Surface chlorination of ground rubber tire and its characterization. Rubber Chem. Technol, 74, 645-661. [Pg.772]

This method has gained wide acceptance due to its simplicity and environmental friendliness. Research is under way to improve the economy of this method. The most important step is the preparation of ground rubber, since the size and topography of the particles vary with the different techniques of grinding [30]. The characteristics of the ground rubber play a vital role in determining the properties of the ground rubber-filled rubber composites. [Pg.1046]

The ductility of GRT-polyethylene blends drastically decreases at ground rubber concentration in excess of 5%. The inclusion of hnely ground nitrile rubber from waste printing rollers into polyvinyl chloride (PVC) caused an increase in the impact properties of the thermoplastic matrix [76]. Addition of rubber powder that is physically modihed by ultrasonic treatment leads to PP-waste ethylene-propylene-diene monomer (EPDM) powder blends with improved morphology and mechanical properties [77]. [Pg.1050]

FIGURE 38.2 Stress-strain curves of polyvinyl chloride-ground rubber tire (PVC-GRT) and PVC-Cl-GRT blends. (Reprinted from Naskar, A.K., Bhowmick, A.K., and De, S.K., J. Appl. Polym. ScL, 84, 622, 2002. With permission from Wiley InterScience.)... [Pg.1051]

SCHEME 38.1 Reaction of allylamine-g-ground rubber tire (GRT) with maleic anhydride grafted pol3fpropyl-ene (MA-g-PP). (Reprinted from Shanmugharaj, A.M., Kim, J.K., and Ryu, S.H., Polymer Test., 24, 739, 2005. Courtesy of Elsevier, U.K.)... [Pg.1053]

Rajalingam, P., Sharpe, J., and Baker, W.E., Ground rubber tire/thermoplastic composites Effect of different ground rubber tires. Rubber Chem. Technol., 66, 664, 1993. [Pg.1064]

Tipanna, M. and Kale, D.D., Composites of waste, ground rubber particles and poly(vinyl chloride). Rubber Chem. Technol., 70, 815, 1997. [Pg.1064]

Phadke, A.A. and De, S.K., Effect of cryo-ground rubber on melt flow and mechanical properties of polypropylene, Polym. Eng. Sci., 26, 1079, 1986. [Pg.1064]

Pramanik, P.K. and Baker, W.E., Toughening of ground rubber tire fibed thermoplastic compounds using different compatibilizer systems, Plastics Rubber Comp., Process. Appl, 24, 229, 1995. [Pg.1064]

Han, S.C. and Han, M.H., Fracmre behavior of NR and SBR vulcanizates fibed with ground rubber having uniform particle size, J. Appl Polym. Sci., 85, 2491, 2002. [Pg.1064]

Rodriguez, A.L., The effect of cryogenicaby ground rubber on some mechanical properties of an unsamrated polyester resin, Polym. Eng. Sci., 28, 145, 1988. [Pg.1064]

T0476 Lehigh University, Ground Rubber as a Reactive Permeable Barrier Sorption Media T0479 Limnofix, Inc., Limnofix In Situ Sediment Treatment (LIST)... [Pg.17]

T0476 Lehigh University, Ground Rubber as a Reactive Permeable Barrier Sorption Media... [Pg.45]

See other pages where Ground rubber is mentioned: [Pg.116]    [Pg.157]    [Pg.1043]    [Pg.1043]    [Pg.1043]    [Pg.1043]    [Pg.1043]    [Pg.1043]    [Pg.1043]    [Pg.1046]    [Pg.1046]    [Pg.1046]    [Pg.1047]    [Pg.1049]    [Pg.1049]    [Pg.1049]    [Pg.1050]    [Pg.1053]    [Pg.1055]    [Pg.1064]    [Pg.1065]    [Pg.31]    [Pg.411]    [Pg.477]    [Pg.480]   
See also in sourсe #XX -- [ Pg.15 , Pg.80 , Pg.83 , Pg.149 , Pg.169 , Pg.185 , Pg.190 , Pg.198 , Pg.205 , Pg.211 , Pg.218 , Pg.235 ]



SEARCH



© 2024 chempedia.info