Grease types filled greases

Step 1 filling grease type epoxy resin squeezed from pump in the bore hole. 

Figure 10 Installation of anchor bolts by filling grease type epoxy resin...

Water samples for determining oil and grease-type substances should be filled in glass bottles and special care taken that the glass bottles, together with ground surfaces and stoppers, have been rendered grease-free beforehand with the same solvent as will be used later to extract the water. 

Couplings are a very eritieal part of any turbomaehinery. They must be earefully designed and proper lubrieation must be applied. The most eommon methods of lubrieating gear-type eouplings are (1) grease-paeked, (2) oil-filled, or (3) eontinuous oil flow. 

There are two types of GC columns that employ a liquid phase. Packed columns, usually 3 or 6mm ( l/8 or 14in.) in diameter and 2m C-6ft) long, are filled with an inactive solid coated with a high-boiling grease or oil or a similar compound bonded to the solid. Also, compounds having various... 

Gear couplings are one type of mechanical-flexing coupling, and there are several ways to lubricate them grease pack, oU fill, oil collect, and continuous oil flow. Either grease or oil can be used at speeds of 3,600 rpm to... 

---