Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Good parts

Although there is still demand for indigotin for dyeing blue jeans, it has lost a good part of the market to other blue dyes with better dyeing properties. At present, practically all the indigotin consumed in the United States comes from abroad. [Pg.404]

The flowsheet for the recommended test system appears on the next page in Figure 4.2.1. Parts mentioned in the bill of materials below the flowsheet are examples for success l models. Other good parts can also be used. [Pg.84]

Vacuum bag bonding is restricted by definition to less than 1 atm (<15 psi) which can be insufficient to achieve good part contact and prevent bondline voids. Hence vacuum bag bonding is rarely used outside of repair situations. [Pg.1163]

The Optimization Xpert Automated design of experiments that builds on the foundation established in Setup Xpert and allows users to further optimize the combination of processing parameters to determine a robust good parts processing window. [Pg.603]

A plastic tube, a critical component of a medical device made of PP, was breaking even with no force being applied. To determine the cause, both a broken part as well as a good part was analyzed. [Pg.649]

Figure 48 First heating cycle DSC scan of the good part. Figure 48 First heating cycle DSC scan of the good part.
While one might question some of the assumptions of their model, such as D0 = D+ and f = constant, it is not unlikely that the model gives roughly correct results over at least a good part of the range of experimental conditions. This would be the case, for example, if the diffusion flux of H° is usually small compared with the drift flux of H+ and would still be so if D0 were equal to D+, and if the most important transport occurs in a reverse bias depletion region where n+/n0 has a nonequilibrium universal... [Pg.306]

The overall advantages of fuel cells are the low environmental impact, which is one to two orders of magnitude lower than in conventional systems, good part load behavior, easy operation, and low maintenance since no rotating parts are needed. The main disadvantages at the moment are the very high costs and the lack of demonstrated reliability. [Pg.299]

United Nations, "Recommendations on the Transport of Dangerous Goods, Part I, Tests and Criteria for the Classificatioin of Explosive Substances and Articles", Report ST/SG/AC. 10/11/Rev 1, United Nations, New York, NY (1990). [Pg.184]

United Nations Recommendations on the Transport of Dangerous Goods, Part... [Pg.191]

WORKING WITH A MIXED-SOLVENT SYSTEM—THE GOOD PART 103... [Pg.103]

Electronic instrumentation is becoming more and more common in the organic lab, which is both good and bad. The good part is that you ll be able to analyze your products, or unknowns, much faster, and potentially with more accuracy than ever. The bad part is that you have to learn about how to use the instrumentation, and there are many different manufacturers of different models of the same instrument. [Pg.228]

Technical Rubber Goods - Part of our Everyday Life. Conference proceedings. [Pg.104]

This book presents an updated account on the status of the computational modeling of homogeneous catalysis at the beginning of the 21 st century. The development of new methods and the increase of computer power have opened up enormously the reliability of the calculations in this field, and a number of research groups from around the world have seized this opportunity to expand enormously the range of applications. This text collects a good part of their work. [Pg.378]

Recreation and tourism are of growing importance in many mountain regions. They are, to a good part, based on multifaceted intact landscapes in which waters clearly play an important role. Hence, waters should convey intact natural sceneries on the one hand, while increasingly experiencing stress from recreational activities. [Pg.13]

This phase separation suggests a new approach to the problem of tertiary oil recovery. We can use such binary systems to dissolve the oil at low temperature and then recover a good part of the oil simply by raising the temperature some 20 to 30 degrees. This is based on the assumption that, at high temperature, ternary systems will also tend to separate into two phases, one of which would be very rich in oil. This should be especially useful for the lighter... [Pg.35]


See other pages where Good parts is mentioned: [Pg.84]    [Pg.125]    [Pg.1165]    [Pg.443]    [Pg.127]    [Pg.412]    [Pg.277]    [Pg.603]    [Pg.288]    [Pg.586]    [Pg.218]    [Pg.4]    [Pg.161]    [Pg.652]    [Pg.654]    [Pg.92]    [Pg.123]    [Pg.336]    [Pg.355]    [Pg.163]    [Pg.304]    [Pg.207]    [Pg.600]    [Pg.18]    [Pg.115]    [Pg.92]    [Pg.146]    [Pg.667]    [Pg.23]   
See also in sourсe #XX -- [ Pg.37 ]




SEARCH



© 2024 chempedia.info