Fourier transform hydrogen bonds

The hydrogen content Ch greatly influences structure and consequently electronic and optoelectronic properties. An accurate measurement of Ch can be made with several ion-beam-based methods see e.g. Arnold Bik et al. [54]. A much easier accessible method is Fourier-transform infrared transmittance (FTIR) spectroscopy. The absorption of IR radiation is different for different silicon-hydrogen bonding configurations. The observed absorption peaks have been indentified [55-57] (for an overview, see Luft and Tsuo [6]). The hydrogen content can be determined from the absorption peak at 630 cm , which includes... 

The linear response theory [50,51] provides us with an adequate framework in order to study the dynamics of the hydrogen bond because it allows us to account for relaxational mechanisms. If one assumes that the time-dependent electrical field is weak, such that its interaction with the stretching vibration X-H Y may be treated perturbatively to first order, linearly with respect to the electrical field, then the IR spectral density may be obtained by the Fourier transform of the autocorrelation function G(t) of the dipole moment operator of the X-H bond ... 

From a practical point of view, the optical detection of possible X—H bonds in hydrogenated samples is performed at LHeT as a better sensitivity is obtained at this temperature because the features are sharper than the ones observed at ambient. The sensitivity of Fourier Transform Spectroscopy (FTS) allows usually a normal incidence geometry of the optical beam. Two kinds of samples are generally used in the hydrogenation studies. The first are thin epitaxial layers (1 to 5 in thickness) with dopant concentrations in the 1017-102° at/cm3 range on a semi-insulating... 

Poly(vinyl acetate). The dielectric and mechanical spectra of hybrids produced by mixing a poly (vinyl acetate)—THF solution with TEOS, followed by the addition of HC1 have been investigated (45). Mixtures were made which were believed to be 0, 5, 10,15, and 20 wt °/o Si02, respectively. These composites were transparent and Fourier transform infrared spectroscopy (ftir) revealed hydrogen bonding between the silicate network and carbonyl units of the poly(vinyl acetate) (PVAc). No shift in the T of the composites from that of the pure PVAc was observed. Similady, the activation... 

This unit describes the attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopic method (AOCS, 1999a AOAC International, 2000), a novel method for measuring the total amount of fat with isolated trans double bonds. It is applicable to natural fats (ruminant fats) and processed fats and oils (partially hydrogenated fats and oils or refined vegetable oils) consisting of long-chain fatty acid methyl esters or triacylglycerols with trans levels >5%, as percent of total fat (AOAC International, 2000). 

---