Foam core injection molding

Figure 5.74 Skin-core morphology of an injection-molded polypropylene structural foam. Reprinted, by permission, from P. R. Hornsby, in Two-Phase Polymer Systems, L. A. Utracki, ed., p. 102. Copyright 1991 by Carl Hanser Verlag.

Recendy, storm doors have been constmcted of advanced thermoplastic composites. Stampable, glass-mat reinforced polypropylene sheet is used to create a high strength outer skin. These compression molded skins are welded together using a friction or ultrasonic process then injection molded with a polyurethane foam core to produce an insulated structure. New technology for window frames incorporate the pultrusion of frame channels to produce a thermoset composite channel that can be filled with fiber glass for further insulation enhancement (12,31,33,34,48,49,54—56,60—67). 

Figure 3.72 [27] presents the various types of foams and their corresponding characteristic density distributions. In integral foam, the unfoamed skin surrounds the foamed inner core. This type of foam can be produced by injection molding and extrusion and it replaces the sandwiched structure also shown in Fig. 3.72. 

Using the coinjection procedure, a solid melt is injected to form the solid, smooth skin against the cavity surface. Simultaneously a second short shot melt with blowing agent is injected to form the foamed core. With a full second shot, the mold can incorporate pins or a mold that opens similar to high-pressure foam molding. 

FIGURE 2.13 Structural foam injection molding, (a) During injection under high pressure there is very little foaming, (b) After injection, pressure drops and foaming occurs at hot core. 

Obtained forms of foamed plastics are blocks, sheets, slabs, boards, molded products, and extruded shapes. These plastics can also be sprayed onto substrates to form coatings, foamed in place between walls (i.e., poured into the empty space in liquid form and allowed to foam), or used as a core in mechanical structures. It has also become possible to process foamed plastics by conventional processing machines like extruders and injection-molding machines. 

Structural foam is the term usually used for foam produced in an injection molding press and made of almost many thermoplastic resin. Structural foam is always produced with a hard integral skin on the outer surfaces and a cellular core in the interior, and is used almost exclusively for production of molded parts. The process is thus ideally suited for fabrication of parts such as business machine housings (commonly for ABS), and similar parts or components in which lightweight and stiffness are required. 

---