Floating nodes

On the other hand, if no net energy is delivered to the medium, then Ebm becomes a floating node, and its potential is determined by the other network elements. 

If m is maintained at a fixed temperature, then J and J2 must be obtained as a solution to nodal equations for the network. On the other hand, if no net energy is delivered to m, then Ebm is a floating node, and the network reduces to a simple series-parallel arrangement. In this latter case the temperature of m must be obtained by solving the network for Ebm. 

Node N00220 is floating Circuit has errors... run aborted See output file for details Simulation aborted... 

While attempting to run this simulation in Micro-Cap, the following error was generated Floating point Pow (0,-1.1376) Domain Error. This was traced to the use of the SPICE-compatible VALUE statement in an E element. The value statement is used to model equations dependent on other nodes or currents. The statement in question used the form X" - Y. This was acceptable to IsSpice and PSpice, but not to Micro-Cap. This statement was rewritten in the equivalent form 1 / (X Y), which was accepted without error. 

Lu, X.B., and J.Y. Dai. Memory Effects of Carbon Nanotubes as Charge Storage Nodes for Floating Gate Memory Applications. Applied Physics Letters 88 (2006) 113104. 

It is proposed that the nodes be magnetized and the CCR oriented to a predefined direction [Kar 02, Kar 05]. When the nodes fall through the air after being deployed, they will orient themselves. If the network has a sufficient density of nodes, it may not need the nodes, which change orientation upon landing. This approach for zero-power orientation is even more efficient for nodes floating on the water. They could freely rotate to orient themselves. 

When no net energy is delivered to the transmitting layers, nodes Eh, and Ebn must be left floating" in the analysis and for this particular system four nodal equations would be required for a solution of the problem. 

Fig. 6. Snapshot depicting the diamond lattice topology of the polyelectrolyte network. The nodes are shown as oversized spheres, connected by the polymer chains. The counterions are floating freely between the polymers...

Fig. 15. Pixel circuit considering parasitic capacitances and substrate cap>acitances. The size of switching and driving TFT is 22/5 /an and 200/5 jMH, respectively. Node A means the floating gate electrode of the driving TFT.

Clearly, either method reduces the period of the original sequence by the number of processes. For example, with 512 nodes running at 100 Mflops (million floating-point operations per second), one will exhaust the sequence of a PRNG with a 46-bit internal state (the common real 8 or long rng) in only 23 minutes (min) If the number of random numbers consumed is greater than expected, then the sequences on different processes could overlap. 

The bandwidth of the network relative to the computational power of the nodes is another critical performance factor. The greater the computational power of the nodes, the greater is the need to rapidly transfer data between them hence, greater computational power requires a higher bandwidth (that is, a smaller /3). Let us look at the relationship required between the computational power and the bandwidth for efficient utilization of a parallel computer. The computational power of a processor can be expressed as l/y, where y is the time needed to perform a floating point operation (see section 5.3). The efficiency with which an application can use a parallel computer (defined in section 5.2) can be expressed as a function of a, p, y, and the number of processors, p,... 

Lee et al. 1991). The wet-ascitic type is characterized hy ascites that may he free or loculated, whereas the dry-plastic type presents with enlarged lymph nodes with central caseation necrosis and adhesion, and the fihrotic-fixed type is observed as an omental mass and matted loops of howel and mesentery. Combinations of these three forms are also found (Kedar et al. 1994). The characteristic sonographic finding of tuberculous peritonitis of the wet-ascitic type is ascites. The most common pattern of ascites is clear fluid, though sometimes ascites is associated with membranes, septa, fine mobile strands, or floating debris (Fig. 12.7). 

The total area of the model simulation is 6000 km. Consists of 25295 grid node computing the number of mold, the minimum size of less than 10 m, can ensure sufficient grid resolution. Computational grid is shown in Figure 3. Floating pier structure within the marina is not considered in the calculation. 

---