Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Firearms designer

Frattaroli, S., D. W. Webster, and S. R Teret. Unintentional Gun Injuries, Firearm Design, and Prevention What We Know, What We Need to Know, and What Can Be Done. Journal of Urban Health, vol. 79, 2002, pp. 49-59. After surveying the background of this field, the article presents possible explanations for the decline in unintentional i.e., accidental) firearms death and injuries. Possible interventions (including changes in firearms design) are also explored. [Pg.191]

The firearms designs are simply there to show a way to build such a weapon that can be modified, and probably improved on, in any number of ways. If you desire to change the designs, in any way, feel free to do sa However, please don t write me or call me and ask me to redesign them for you and don t, for Heaven s sake, tell me that you are building one of these guns and ask me to... [Pg.220]

When used in products not licensed for drinking, ethanol usually occurs in the form of denatured alcohol, or specially denatured alcohol—alcohol that has been rendered unfit for drinking. You will often see SD alcohol mentioned on a label, sometimes followed by a number and letter, such as 40-B. This is the designation given by the U.S. Bureau of Alcohol, Tobacco, and Firearms to the denaturing method used. For example, SD-40 is ethanol denatured by adding tiny amounts of the most bitter-tasting substance known denatonium benzoate. [Pg.56]

Izumi, Michael T. In Self Defense The Legal, Ethical and Tactical Use of Deadly Force. Concord, N.H. Police Bookshelf, 1995. Although designed as a practical handbook for persons who want to be able to defend themselves with a firearm, this book also shows the potential complexity of such situations including possible legal consequences. [Pg.164]

A) a firearm which has a short stock and is designed to be beld and fired by tbe use of a single band and... [Pg.270]

Gun Design, Chapt 2—Gun Construction, Chapt 3—Recoil, Chapt 4-Carriages and Mounts and Chapt 5—Breech Mechanisms) 56)Anon, "Artillery Ammunition, Dept of the Army Tech Manual, TM 9—1901, Washington,DC(1950) 57)ORDIM,Office of Chief of Ordnance Washington 25,DC,"Com-plete Round Charts, No 5981(1950-1) 58)Anon, "Ordnance Proof Manual, Nos 1—1 to 70-10, years of issue 1937-1951, Office of Chief of Ordnance, Washing ton,DC 59) R.Held, "The Age of Firearms, A Pictorial History, Harper Bros, NY(1951) 60)C.R. Jacobs, "Official Gun Book,1 CrownPublg Co,NY(1951) 6l)Anon, "Ordnance Inspection Handbook on Ammunition Material, ... [Pg.389]

Starting in the Middle Ages, from the development of firearms and guns based on explosives emerged the problem of designing safe containments (gun barrels) against the high detonation pressure (today, several thousand bar). [Pg.4]

As the propint proved to be very suitable for rifled firearms, it was adopted by the French Govt for use in the Lebel rifle. It was also adopted for use in field guns. Slightly earlier and independently of Vieille, a similar propint was developed in Germany by Max von Duttenhofer and designated RCP (Rottweiler Cellulose Pulver) (Refs 1,2,3,10,11,13,14,16 17)... [Pg.1]

Degtiarev, V. A. (1880-1950 ) One of the best known Russian designers of firearms. [Pg.465]

Hand cannons developed through various stages. They were shortened and redesigned for use from horseback and were used in combination weapons where the weapon could either be used as a firearm or, for example, as a club or an axe. Many different designs of hand cannon were widely used for... [Pg.29]

The rifle evolved from the musket which was a long-barreled firearm with a fore end or forearm extending nearly to the muzzle. Dozens of designs of self-loading rifles were produced. One of the first practical designs was developed in Austria by Mannlicher in 1885 and it was recoil operated.37... [Pg.31]

The feeding and extraction mechanism of the firearm coupled with the type of ignition system dictates the design of the base of the cartridge case. Nearly all cartridge cases have the outside surface of the base indent-stamped by the maker (head stamp). Information such as the maker s initials, code, or mark, year of manufacture (mainly military ammunition), caliber or other coded information are indent-stamped into the base. It is sometimes possible, even for old ammunition, for a manufacturer to check its records and give the complete specification of a round of ammunition from the head stamp details. [Pg.37]

The process of delivery of propellant gases at a predetermined rate involves the selection of a propellant composition with the required burning rate at the operating pressure of the firearm, and then designing the propellant granules so that the necessary burning surface is available to provide the required mass rate of gas evolution, that is, the necessary time/pressure relationship. [Pg.59]


See other pages where Firearms designer is mentioned: [Pg.61]    [Pg.191]    [Pg.193]    [Pg.27]    [Pg.83]    [Pg.83]    [Pg.123]    [Pg.221]    [Pg.61]    [Pg.191]    [Pg.193]    [Pg.27]    [Pg.83]    [Pg.83]    [Pg.123]    [Pg.221]    [Pg.429]    [Pg.45]    [Pg.136]    [Pg.140]    [Pg.108]    [Pg.184]    [Pg.190]    [Pg.204]    [Pg.219]    [Pg.127]    [Pg.830]    [Pg.390]    [Pg.166]    [Pg.468]    [Pg.468]    [Pg.389]    [Pg.390]    [Pg.4]    [Pg.4]    [Pg.5]    [Pg.8]    [Pg.19]    [Pg.24]    [Pg.26]    [Pg.26]    [Pg.29]    [Pg.59]    [Pg.67]   
See also in sourсe #XX -- [ Pg.61 ]




SEARCH



Firearms

© 2024 chempedia.info