Filament element

Filament element. A fine tungsten or similar wire which is used as the variable resistance sensing element in the thermal conductivity cell chamber. 

Kramer and co-workers (7) reported that acoustic emission occurred in polystyrene immersed in diflFerent swelling liquids only when the crazes ruptured but not during their formation and growth. As long as the bridging by filamental elements is still intact, the deformation at the craze tip and in the craze is still so slow that no acoustic bursts are generated. It is the final fracture of these elements which is abrupt enough to cause the emission of a detectable acoustic burst. 

Adapting the Clam-shaped Globular Protein Motif to Approach a Sliding Filament Element of Contraction... 

The existence of carbon liber (CFs) came into being in 1879 when Thomas Edison recorded the use of carbon fiber as a filament element in electric lamp. Fibers were first prepared from rayon fibers by the US Union Carbide Corporation and the US Air Force Materials Laboratory in 1959 [41 ]. In 1960, it was realized that carbon fiber is very usefirl as reinforcement material in many applications. Since then a great deal of improvement has been made in the process and product through research work carried out in USA, Japan and UK. In 1960s, High strength Polyacrylonitrile (PAN) based carbon fiber was first produced in Japan and UK and pitch based carbon fiber in Japan and USA. 

Tantalum is a gray, heavy, and very hard metal. When pure, it is ductile and can be drawn into fine wire, which is used as a filament for evaporating metals such as aluminum. Tantalum is almost completely immune to chemical attack at temperatures below ISOoC, and is attacked only by hydrofluoric acid, acidic solutions containing the fluoride ion, and free sulfur trioxide. Alkalis attack it only slowly. At high temperatures, tantalum becomes much more reactive. The element has a melting point exceeded only by tungsten and rhenium. Tantalum is used to make a variety... 

Tungsten with the addition of as much as 5% thoria is used for thermionic emission cathode wires and as filaments for vibration-resistant incandescent lamps. Tungsten—rhenium alloys are employed as heating elements and thermocouples. Tantalum and niobium form continuous soHd solutions with tungsten. Iron and nickel are used as ahoy agents for specialized appHcations. 

The first commercial use of tantalum was as filaments ia iacandescent lamps but it was soon displaced by tungsten. Tantalum is used ia chemical iadustry equipment for reaction vessels and heat exchangers ia corrosive environments. It is usually the metal of choice for heating elements and shields ia high temperature vacuum sintering furnaces. In 1994, over 72% of the tantalum produced ia the world went iato the manufacturiag of over 10 x 10 soHd tantalum capacitors for use ia the most demanding electronic appHcations. 

Titanium tetraiodide can be prepared by direct combination of the elements at 150—200°C it can be made by reaction of gaseous hydrogen iodide with a solution of titanium tetrachloride in a suitable solvent and it can be purified by vacuum sublimation at 200°C. In the van Arkel method for the preparation of pure titanium metal, the sublimed tetraiodide is decomposed on a tungsten or titanium filament held at ca 1300°C (152). There are frequent hterature references to its use as a catalyst, eg, for the production of ethylene glycol from acetylene (153). 

Cesium was first produced ia the metallic state by electrolysis of a molten mixture of cesium and barium cyanides (2). Subsequentiy the more common thermochemical—reduction techniques were developed (3,4). There were essentially no iadustrial uses for cesium until 1926, when it was used for a few years as a getter and as an effective agent ia reduciag the electron work function on coated tungsten filaments ia radio tubes. Development of photoelectric cells a few years later resulted ia a small but steady consumption of cesium and other appHcations for cesium ia photosensing elements followed. 

An explosion may occur if the filament is heated while a3l appreciable amount of air is still present. Furthermore, the heating element will burn out at once if an adequate supply of cyclohexene vapor is not supplied, since the current passing through the wire is far above the normal rating for air. 

Electrothermal vaporization can be used for 5-100 )iL sample solution volumes or for small amounts of some solids. A graphite furnace similar to those used for graphite-furnace atomic absorption spectrometry can be used to vaporize the sample. Other devices including boats, ribbons, rods, and filaments, also can be used. The chosen device is heated in a series of steps to temperatures as high as 3000 K to produce a dry vapor and an aerosol, which are transported into the center of the plasma. A transient signal is produced due to matrix and element-dependent volatilization, so the detection system must be capable of time resolution better than 0.25 s. Concentration detection limits are typically 1-2 orders of magnitude better than those obtained via nebulization. Mass detection limits are typically in the range of tens of pg to ng, with a precision of 10% to 15%. 

The basic principle of e-beam SNMS as introduced by Lipinsky et al. in 1985 [3.60] is simple (Fig. 3.30) - as in SIMS, the sample is sputtered with a focused keV ion beam. SN post-ionization is accomplished by use of an e-beam accelerated between a filament and an anode. The applied electron energy Fe a 50 20 eV is higher than the range of first ionization potentials (IP) of the elements (4—24 eV, see Fig. 3.31). Typical probabilities of ionization are in the 0.01% range. SD and residual gas suppression is achieved with electrostatic lenses before SN post-ionization and energy filtering, respectively. 

---