Fibres clean

The size of equipment can vary from a 200 W unit for a commercial dry-cleaning machine to systems of megawatt size for synthetic fibre processes. 

In America there are promising signs for certain polymers. For example, poly(ethylene terephthalate) drinks bottles can be cleaned and recycled to give an acceptable grade of PET resin in a process that is economically viable. The recycled polymer is used as carpet fibre, furniture stuffing, or insulation. Waste nylon can also be recycled profitably. 

Containers made flxm fibrous materials such as paper, cardboard and sacking, are generally heavily contaminated (especially with moulds and bacterial spores) and should not be taken into clean or aseptic areas where fibres or microorganisms shed flxm them could contaminate the product. Ingredients which must be brought into clean areas must first be transferred to suitable metal or plastic containers. 

In contrast to specifying to suppliers what chemicals or materials are restricted, it is useful to specify exactly what chemicals and materials are desired. Once a material or chemical is well characterized, and it is considered benign with respect to human and environmental health, it can be added to a preferred or positive list (i.e., P-list). For example, a textile manufacturer may source certified organic cotton, or polyester made with antimony-free catalysts, to develop a product line based on these fibres. Or a cleaning product formulator may seek bio-based solvents or rapidly biodegradable surfactants consistent with their product development objectives. 

In order to dry the crystals, the Buchner funnel is inverted over two or three thicknesses of drying paper (i.e., coarse-grained, smoothsurfaced filter paper) resting upon a pad of newspaper, and the crystalline cake is removed with the aid of a clean spatula several sheets of drying paper are placed on top and the crystals are pressed firmly. If the sheets become too soiled by the mother liquor absorbed, the crystals should be transferred to fresh paper. The disadvantage of this method of rapid drying is that the recrystallised product is liable to become contaminated with the filter paper fibre. 

The filters used for gas cleaning separate the solid particles by a combination of impingement and filtration the pore sizes in the filter media used are too large simply to filter out the particles. The separating action relies on the precoating of the filter medium by the first particles separated which are separated by impingement on the filter medium fibres. Woven or felted cloths of cotton and various synthetic fibres are commonly used as the filter media. Glass-fibre mats and paper filter elements are also used. 

There are dampers bottom and top of this cladding cavity to promote natural ventilation. A few integrated photo-voltaic panels are sufficient to power the fans (twelve V2-HP motors) that assist ventilation through the double skin. There are tracks within the double skin that assist in the cleaning of surfaces 2 and 3. There is also a grid of fibre optic lights that blink periodically and change colour. 

The purpose of scouring is to reduce to an acceptable level the amounts of fats, waxes, oils and dirt present. Apart from the aesthetic benefits of a clean substrate, the major technical reason for scouring is to improve the extent and uniformity of absorbency for subsequent processes, especially coloration. Usually the objective is the complete removal of all extraneous matter but on occasion only partial removal is the aim, since a certain residue of oils, for example, will aid such processes as spinning, weaving or knitting. Scouring is particularly important with natural fibres, which obviously contain much more extraneous matter than do synthetic fibres. 

Different studies have been conducted by the same team of researchers for the analyses of tapestry fibres. The main aim was to study the surface evolution of these fibres, silk or wool, during light ageing or cleaning procedures. 

Hua et al. [71] carried out automated determination of total arsenic in seawater by flow constant-current stripping with gold fibre electrodes in which the sample was acidified and pentavalent arsenic was reduced to the trivalent form with iodide. The arsenic was then deposited potentiostatically for 4 min on a 25 xm gold fibre electrode, and subsequently stripped with constant current in 5 M hydrochloric acid. Cleaning and regeneration of the gold electrode were fully automated. 

Less loss of textile fibres during the cleaning cycle leading to a longer lifetime of the garments. " ... 

Technical advantage/fimction Ceramic fibres are used in automotive catalytic converters as bearing and adjustment materials for the catalytic converter (monolith), where the chemical reactions for exhaust cleaning take place. They are also used for thermal and acoustic insulation. Series-tested ceramic fibre substitutes for converter-specific usage conditions are not yet available... 

---