Fast atom bombardment technique

The carbinolamine metabolite 64 was unstable in organic solvents and on routine chromatography. It was impossible to obtain molecular ions in the mass spectra by electron impact, chemical ionization, Held desorption, or fast-atom bombardment techniques. The apparent molecular ion occurred at m/e 456, consistent with a carbinolamine such as 64, which eliminates water to form an [M — 18] peak. The H-NMR spectrum of this metabolite was similar to that of... 

Mass spectroscopy has been reviewed, particularly its application to volatiles [1,2] and non-volatiles [3], fast atom bombardment techniques [4] (Section 2.6), secondary ion mass spectroscopic techniques (SIMS) [5] (Section 2.1), electrospray ionisation (ESI) - mass spectroscopy (Section 2.3) [6] and laser mass spectroscopy techniques (Section 2.2) [7]. 

Some mild methods of ionization (e.g., chemical ionization. Cl fast-atom bombardment, FAB electrospray, ES) provide molecular or quasi-molecular ions with so little excess of energy that little or no fragmentation takes place. Thus, there are few, if any, normal fragment ions, and metastable ions are virtually nonexistent. Although these mild ionization techniques are ideal for yielding molecular mass information, they are almost useless for providing details of molecular structure, a decided disadvantage. 

This method is still in use but is not described in this book because it has been superseded by more recent developments, such as particle beam and electrospray. These newer techniques have no moving parts, are quite robust, and can handle a wide variety of compound types. Chapters 8 through 13 describe these newer ionization techniques, including electrospray, atmospheric pressure ionization, plasmaspray, thermospray, dynamic fast-atom bombardment (FAB), and particle beam. 

To achieve sufficient vapor pressure for El and Cl, a nonvolatile liquid will have to be heated strongly, but this heating may lead to its thermal degradation. If thermal instability is a problem, then inlet/ionization systems need to be considered, since these do not require prevolatilization of the sample before mass spectrometric analysis. This problem has led to the development of inlet/ionization systems that can operate at atmospheric pressure and ambient temperatures. Successive developments have led to the introduction of techniques such as fast-atom bombardment (FAB), fast-ion bombardment (FIB), dynamic FAB, thermospray, plasmaspray, electrospray, and APCI. Only the last two techniques are in common use. Further aspects of liquids in their role as solvents for samples are considered below. 

Fast-atom bombardment (FAB) is an ionization technique that produces a protonated or deprotonated molecular ion, hence a molecular mass for the sample. It can be used for analysis of peptides up to m/z about 5000. 

Mass spectral analysis of quaternary ammonium compounds can be achieved by fast-atom bombardment (fab) ms (189,190). This technique rehes on bombarding a solution of the molecule, usually in glycerol [56-81-5] or y -nitroben2yl alcohol [619-25-0], with argon and detecting the parent cation plus a proton (MH ). A more recent technique has been reported (191), in which information on the stmcture of the quaternary compounds is obtained indirectly through cluster-ion formation detected via Hquid secondary ion mass spectrometry (Isims) experiments. 

The analysis of penicillins by mass spectrometry (qv) has developed with the advent of novel techniques such as fast atom bombardment. The use of soft ionization techniques has enabled the analysis of thermally labile nonvolatile compounds. These techniques have proven extremely valuable in providing abundant molecular weight information from underivatized penicillins, both as free acids and as metal salts (15). 

The mass spectrometry of diazo compounds was reviewed by Zeller (1983) and by Lebedev (1991). It is difficult to record mass spectra of diazonium salts using conventional techniques. With the water thermospray method, however, Schmelzeisen-Redeker et al. (1985) observed the diazonium ion and various fragments such as [Ar+ - N2 + 2H]+ and [Ar + N2 + H20]+. Ambroz et al. (1988) applied the fast atom bombardment (FAB) technique using a 3-nitrobenzylalcohol matrix. Peaks for ArNJ, Ar+, and [M + ArN2]+ and further peaks due to solvated ions were found. 

Fast atom bombardment mass spectrometry and related techniques. J. M. Miller, Adv. Inorg. Chem. Radiochem., 1984,28,1 (118). 

Mass spectroscopy is a useful technique for the characterization of dendrimers because it can be used to determine relative molar mass. Also, from the fragmentation pattern, the details of the monomer assembly in the branches can be confirmed. A variety of mass spectroscopic techniques have been used for this, including electron impact, fast atom bombardment and matrix-assisted laser desorption ionization (MALDI) mass spectroscopy. 

Cl is not the only ionization technique where this aspect of interpretation must be considered carefully fast-atom bombardment, thermospray, electrospray and atmospheric-pressure chemical ionization, described below in Sections 3.2.3, 4.6, 4.7 and 4.8, respectively, all produce adducts in the molecular ion region of their spectra. 

Fast-atom bombardment (FAB) is one of a number of ionization techniques which utilize a matrix material, in which the analyte is dissolved, to transfer sufficient energy to the analyte to facilitate ionization. In FAB, the matrix material is a liquid, such as glycerol, and the energy for ionization is provided by a high-energy atom (usually xenon) or, more recently, an ion (Cs+) beam. In conventional FAB, the solution of analyte in the matrix material is applied to the end of a probe which is placed in the source of the mass spectrometer where it is bombarded with the atom/ion beam. 

The problem of the successful ionization of thermally labile molecules has been addressed by the introduction of energy-sudden techniques, such as fast-atom bombardment (FAB), which rely on the fact that energy may be provided to the molecule so rapidly that desorption takes place before decomposition may occur. 

Fast-atom bombardment An ionization method used for involatile and thermally labile materials. In this technique, the sample is dissolved in a matrix material and bombarded with a high-energy atom or ion beam. 

In line with the policy of Advances to provide periodic coverage of major developments in physical methodology for the study of carbohydrates, A. Dell (London) here surveys the use of fast-atom-bombardment mass spectrometry in application to carbohydrates. This technique has achieved rapid prominence as the soft ionization technique of choice for structural investigation of complex carbohydrate sequences in biological samples. The author s extensive personal involvement in this field makes her chapter a critical, state-of-the-art overview for the specialist, as well as a valuable primer for the reader unfamiliar with this technique. 

Due to the high mass, low volatility, and thermal instability of chlorophylls and derivatives, molecular weight determination by electron impact (El) MS is not recommended. Desorption-ionization MS techniques such as chemical ionization, secondary ion MS, fast-atom bombardment (FAB), field, plasma- and matrix-assisted laser desorption have been very effective for molecular ion detection in the characterization of tetrapyrroles. These techniques do not require sample vaporization prior to ionization and they are effective tools for allomerization studies. 

Principles and Characteristics In the early mass-spectrometric ionisation techniques, such as El and Cl, the sample needs to be present in the ionisation source in its gaseous phase. Volatilisation by applying heat renders more difficult the analysis of thermally labile and involatile compounds, including highly polar samples and those of very high molecular mass. Although chemical derivatisation may be used to improve volatility and thermal stability, many compounds have eluded mass-spectrometric analysis until the emergence of fast atom bombardment (FAB) [72]. 

Mass spectrometry (MS) in its various forms, and with various procedures for vaporization and ionization, contributes to the identification and characterization of complex species by their isotopomer pattern of the intact ions (usually cation) and by their fragmentation pattern. Upon ionization by the rough electron impact (El) the molecular peak often does not appear, in contrast to the more gentle field desorption (FD) or fast-atom bombardment (FAB) techniques. An even more gentle way is provided by the electrospray (ES) method, which allows all ionic species (optionally cationic or anionic) present in solution to be detected. Descriptions of ESMS and its application to selected problems are published 45-47 also a representative application of this method in a study of phosphine-mercury complexes in solution is reported.48... 

---