Fabrication controls

C-D Evaluate control alternatives. M-N Fabricate control device. 

These failures could be due to the variability of the plastic material and/or fabrication control of equipment. Applying an approach such as the IVoubleshooting Guide reviewed, can direct you to the solution. 

It is important to understand what happens to plastics during the manufacture of products and how it fits into the overall manufacturing operation (Table 8-1). With proper fabricating controls, products are reproduced meeting performance requirements at the minimum cost. 

Fabricating controls involve many facets of the machine operation and the behavior... 

Subsequent collapsing of the foam is generally by collapse onto the fabric (controlled to some extent by the chemicals used), by vacuum suction of the foam into the fabric, or by means of a pad nip. 

D. Habel, J. B. Stelzer, J. Caro, M.-M. Pohl, E. Feike, H. Schubert, Nano-Architectured and Nanostructured Materials Fabrication, Control and Properties, [Selected Papers presented at the Euromat Conference], Lausanne, Switzerland, Sept. 1-3, 2003 (2004), Meeting Date 2003, 79-87, Wiley-VCH Verlag GmbH Co. KGaA, Weinheim, Germany. 

Another type of lithium solid state cell which reached the quasi-commercial stage was developed in the mid-1980s by Eveready. This cell used a vitreous inorganic electrolyte formed by a mixture of Lil and Li8P4Oo,25S 13.75. This solid electrolyte had a reasonably high conductivity which allowed cell operation at ambient temperatures. A disadvantage was its high reactivity which imposed the use of severe fabrication controls (e.g. assembly in a strictly moisture-free environment). 

The effects of type of vinyl monomer on the properties of copolymer fabrics are shown in Table VII. Two different fabric constructions, print cloth and twill, were used. After the copolymer fabrics were prepared, they were given the usual treatment with dimethyloldihydroxyethylene urea to crosslink the cellulose. The wash-wear appearance ratings, flat abrasion resistances, and, in most cases, wrinkle-recovery angles of copolymer twill fabrics were improved over fabric controls. For copolymer... 

In view of the intricate structural features in natural silk, it becomes understandable that man-made silks in order to achieve satisfying mechanical properties will require a significant step-up in fabrication control to manage for example a proper degree of crystallinity and crystal size, as well as molecular chains organization and orientation. 

As described above, the design, fabrication, control, and detection methods were established for integrated microchemical systems. We have applied the techniques to a variety of chemical systems. 

Champion, Y., and Fecht, H. (2004), Nano-Architectured and Nanostructured Materials Fabrication, Control and Properties, Wiley, Hoboken, NJ. 

Physical Adsorption of Polymers. The silane attachment procedure and the resulting interfaces have limitations. They include fragility—the electrode-chemical site link is susceptible to hydrolysis—the inability to fabricate controlled multilayers, and the fact that the fabrication procedures are somewhat difficult and tedious. A second approach, which has the advantage of extreme simplicity, is physical adsorption of pre-made polymers either by dipping the electrode into a polymer solution or by controlled evaporation of a solution on the electrode surface. If the composition of the external solution with regard to solvent and pH is controlled, reasonably stable interfaces can be prepared by simple adsorption. 

Special requirements for warp knitting include the following (1) a device is required for proper density and even tension of elastomeric yams in producing elastomeric fabrics with repeatable results in stretch, recovery, modulus, shrinkage, and elastic fiber content (2) yam let-off must be electronic or electromechanical for best fabric control and reproducibility (3) special selvage holders (pullers), fabric hot-wire slitters. 

Various thermomechanical microvalves have been developed with the development of MEMS fabrication technology. Thermomechanical micro valves work by converting thermal energy into mechanical deformation. Compared with other microvalves, such as magnetic microvalves, electrostatic microvalves, and piezoelectric microvalves, thermally driven microvalves have their own advantages such as simphcity of fabrication, controllable deflection... 

The lightweight flexible sheet materials suitable for use as breather membranes in most forms of wall construction are manufactured firom high-density polyethylene or polypropylene, PTFE (Teflon), or a combination of both. A flexible membrane coated or laminated to an outer base fabric controls the moisture permeability through the fabric. 

---