European Federation of Corrosion

Literature Recent additions to the literature on the principles and practice of inhibition include books concerned with the subject as a whole, and reports of conferences and papers, or reports concentrating on particular aspects of the subject. Books include the volume by the late Professor I. L. Rozenfel d and collected data in the form of references, patents etc. from various sources Conferences include the recent quinquennial events at the University of Ferrara S, each providing substantial contributions to all aspects of corrosion inhibition. The uses of molybdates as inhibitors have been reviewed by Vukasovich and Farr in a paper with 221 references and test methods for inhibitors in a report from the European Federation of Corrosion with 49 references . 

The Marine Corrosion Working Party of the European Federation of Corrosion has published valuable advice on corrosion testing in service... 

European Federation of Corrosion Publication No. 4, A WP report Guidelines on Electrochemical Corrosion Measurements, The Inst, of Metals, London (1990)... 

Published for the European Federation of Corrosion by Woodhead Publishing and Maney Publishing on behalf of... 

European Federation of Corrosion Publications Series introduction... 

European Federation of Corrosion, The Institute of Materials, Minerals and Mining, 1 Carlton House Terrace, London SW1Y 5DB, UK... 

H.-H. Strehblow, C. Calinski, S. Simson, P. Druska, H.-W. Hoppe, A. Rossi, in Modification of Passive Films, P. Marcus, B. Baroux, M. Keddam editors, European Federation of Corrosion, Publication No. 12, The Institute of Materials 1994. 

A. Ruck, J. Novotny, J. Konys, J. Hausseit, Proceedings of EUROCORR 98, European Federation of Corrosion, Frankfurt/Main, Germany, 1998, on CD. 

Recommendations for the evaluation of damage by corrosion in different branches of industry are published in the European Federation of Corrosion series. Two of the recent publications in this series have been devoted to corrosion in the oil and gas industry [4] and in nuclear waste system [5]. 

P.S. Jackman, ed. A Working Party Report on the Life Cycle Costing of Corrosion in the Oil and Cas Industry a Cuideline (European Federation of Corrosion Series, No. 32). Leeds, Maney Publishing, 2003. 

J. A. Gonzales, An initial effort to use the corrosion rate measurements for estimating rebar durability . Symposium on Corrosion Rate of Reinforcement in Concrete, ASTM, Baltimore, USA, 29, 1988. CEB, Durable Concrete Structures, Bulletin d information No.183,1992. U. Ntirnberger, Corrosion of metals in contact with mineral building materials , European Federation of Corrosion, Riva del Garda,... 

R. B. Polder, B. Elsener, The European Federation of Corrosion Publication number 31, The Institute of Materials, London, 85-92, 2000. 

G. Sergi, C. L. Page, Sacrificial anodes for cathodic prevention of reinforcing steel around patch repairs applied to chlorideEuropean Federation of Corrosion, Event No. 227, Aachen, 30 August-2 September 1999, 248. 

A state-of-the-art document on reaUcahsation (and chloride extraction) was published by the European Federation of Corrosion [24] and technical information was provided from two European COST Actions [27,28]. Presently, CEN is working on a European standard for reaUcahsation of concrete. 

Ch. Haldemann, A. Schreyer, Ten years of cathodic protection in concrete in Switzerland , in Corrosion of Reinforcement in Concrete - Monitoring, Prevention and Rehabilitation, Papers from Eurocorr 97, J. Mietz, B. Elsener, R. Polder (Eds.), The European Federation of Corrosion Publication number 25, The Institute of Materials, London, 184-197, 1998. 

J. Mietz, Electrochemical rehabilitation methods for reinforced-concrete structures - A state of the art report , European Federation of Corrosion Publication number 24, lOM Communications, London, 1998. 

P. F. G. Banfill, T. K. H. Al-Kadhimi, The effects of re-alkalisation and chloride removal on alkali-silica expansion in concrete , Eurocorr 98, European Federation of Corrosion, Utrecht, 28 September - 1 October 1998 (CD-ROM). 

R. Myrdal, Embeddable Reference Electrodes for Concrete - A State of the art Report, European Federation of Corrosion, WP 11 Corrosion in Concrete, Task Group 5, Draft 3, August, 2000. 

S. M. Beloglazov, A. N. Charoshavin, Corrosion behavior of steel in coal mining waters in the presence of thiobacillus thioox-idans and thiobacillus ferroxidans. Proceedings of the 3rd International EFC Workshop, The European Federation of Corrosion by the Institute ofMaterial, 1995, pp. 398-404. 

European Federation of Corrosion. Working Party on Physico-Chemical Methods of Corrosion Testing Guidelines on electrochemical corrosion measurements. 

European Federation of Corrosion The Institute of Metals 1 Carlton House Terrace LONDON SWl Y 5DB UK... 

Electrochemical methods have been used in corrosion testing ever since the electrochemical nature of corrosion processes was discovered. In the present age electrochemical measurements involve the use of sophisticated black boxes which are invariably blamed for any pitfalls which occur. Hence the European Federation of Corrosion Working Party on Physicochemical Methods of Corrosion Testing felt it desirable to remind research workers, students and instrument designers of the more fundamental aspects of the measurements. 

EFC publication No 16. Guidelines on materials requirements for carbon and low alloy steels for H2S-containing environments in oil and gas production, 2nd Ed., London European Federation of Corrosion, 2002. 

---