Ethyl phthalate, reactions

It is not possible to prepare biaryls containing a free carboxyl group directly by the diazo reaction. No biaryl is formed when (a) diazotized aniline and sodium benzoate, (b) diazotized anthranilic acid and aqueous sodium benzoate, or (c) diazotized anthranilic acid and benzene are used as components in the reaction.13 On the other hand, the reaction proceeds normally if methyl benzoate is used in reaction (a) or when methyl anthranilate replaces the anthranilic acid in (b) and in (c). The success of the diazohydroxide reaction appears to lie in the ability of the non-aqueous liquid to extract the reactive diazo compound from the aqueous layer.4 However, esters and nitriles can be prepared from esters of aromatic amino acids and cyanoanilines and also by coupling with esters of aromatic acids, and from the products the acids can be obtained by hydrolysis. By coupling N-nitrosoacetanilide with ethyl phthalate, ethyl 4-phenylphthalate (VIII) is formed in 37% yield. 

The high thermal stability of the Deloxan ASP catalysts is also a key factor when looking at the achieved conversion rates in the esterification of phthalic anhydride with various alcohols, e.g. 1-octanol or 2-ethyl-hexanol, to yield di-octyl-phthalates (reaction 1) that are used as plasticizers. Product yields of > 99% for the diester are obtained for residence times between 30-50 minutes, at temperatures between 150°C and 180°C. 

All of the materials used in this study were from commercial sources with the exception of N-phenylglycine (NPG) which was synthesized (9). The SAMs used (Figure 2) were mono(2-methacryloyloxy)ethyl phthalate, MMEP, (Rhom Tech., Inc., Malden, MA), biphenyl dimethacrylate, BPDM, and diphenyl sulfone dimethacrylate, DSDM, (Bisco Inc., Itasca. IL), all derived by the reaction of 2-hydroxyethyl methacrylate with the appropriate anhydride. Adaptic (Johnson and Johnson, East Windsor, NJ) was used as the chemically activated composite restorative material. Extracted non-carious human molars, which were stored in... 

The most used phthalate ester is DOP (Equation 15.3), made from the reaction of 2-ethyl hexanol (Equation 15.1) with phthalic anhydride (Equation 15.2). 

Ethyl alcohol has been made by the hydration of ethylene (9) since 1930. Like isopropyl alcohol, part of the output is used as a solvent, but most is converted to other oxygenated chemicals. Its most important raw material use is conversion to acetaldehyde by catalytic air oxidation. Acetaldehyde, in turn, is the raw material source of acetic acid, acetic anhydride, pentaerythritol, synthetic n-butyl alcohol (via aldol condensation), butyraldehyde, and other products. Butyraldehyde is the source of butyric acid, polyvinyl butyral resin, and 2-ethylhexanol (octyl alcohol). The last-named eight-carbon alcohol is based on the aldol condensation of butyraldehyde and is used to make the important plasticizer di-2-ethylhexyl phthalate. A few examples of the important reactions of acetaldehyde are as follows ... 

Starting with ketones and hydrogen peroxide in the presence of a catalytic amount of acid, mixtures of up to eight components have been identified, i.e.. (1, X = OH. R3 = H), (1, X = OOH, R3 = H), (2, X = Y = OH). (2, X = Y = OOH), (2, Y = OH, Y = OOH), (3). (4), and (5). The ketone structure and reaction conditions, i.e., acid strength, reactant molar ratios, temperature, and time, determine which compounds form and predominate. Mixtures of several peroxide structures usually are present. Individual peroxides have been isolated from several ketones under different conditions (Table 5). The pure peroxides should be handled with extreme caution since most, especially those derived from the low moleculai weight ketones, ate shock- and friction-sensitive and can explode violently. Methyl ethyl ketone peroxide (MEKP) mixtures are produced commercially only as solutions containing <40 wt% MEKPs in solvents, commonly dialkyl phthalates. 

Formation of aldehydes by the reaction of alkene, CO and H2 catalysed by Co2(CO)8 was discovered by Rolen in 1938 [25]. This is the 1,2-addition of H and CHO to alkenes, and hence called hydroformylation or the oxo reaction. Production of butanal, (33) from propylene as a main product is an important industrial process. Aldol condensation of butanal, followed by hydrogenation affords 2-ethyl-1-hexanol (34), which is converted to phthalate, and used as a plasticizer of poly(vinyl chloride). 

Alkyl- and aryl-substituted carboxylic acid derivatives such as ethyl 4-methoxybenzoate, diethyl phthalate,104 aryl- and alkylcarboxylic add halides or anhydrides10,2 5 8 give benzoxazinones (193). When IA was brominated in glacial acetic acid, 193 (R2 = CHBr2) was obtained.259 Anthranilic acid (4) with A-methyl IA (24) leads to 194, which cyclizes in sulfuric acid to the benzoxazinone 195134 (Scheme 33). Reaction of /V-formylanthranilic acid (196) (available from 1A and formic acid) with IA again yields the quina-zolinone 19710 260 (Eq. 19). 

Figure 8-7. Correlation between equilibrium constant for esterification and solubility of water in the solvent. Equilibrium constant was defined as [Ester]/([Alcohol].[Acid]), for reactions at fixed water activity (close to 1). Solvents are bb, butyl benzoate be, bromoethane bk, dibutyl ketone bp, dibutyl phthalate bz, benzene ca, 1,1,1-trichloroethane cf, chloroform ct, carbon tetrachloride cy, trichloroethylene ee, ethyl ether ek, diethyl ketone ep, diethyl phthalate hd, hexadecane hx, hexane me, methylene chloride mk, methyl iso-butyl ketone nm, nitromethane oc, /so-octane pe, iso-propyl ether tl, toluene. Valivety et al...

Solution Polymerization. Solution polymerization is over 45 years old, but only about 3% of the PVC produced in the United States is made this way. The solution process differs from the other processes already discussed in that a solvent is added to the polymerization system. The system may be heterogeneous, in which case the monomer is soluble but the polymer is insoluble. Examples are the use of hexane, butane, ethyl acetate, or cyclohexane as solvents. After addition of a peroxide initiator and heating to 40 C, the polymerization starts and polymer precipitates out of solution as formed. In homogeneous reactions, both monomer and polymer are soluble therein. Examples are the use of dibutyl phthalate and tetrahydrofuran as solvents. 

---