ETHER POLYMER

Tetrahydrofuran (3) is produced commercially from furfural by decarbonylation followed by hydrogenation it is also produced by several different methods from other raw materials. A complete discussion of tetrahydrofuran is found under Ethers. Polymers of tetrahydrofuran are covered under the general topic. Polyethers. Several other compounds containing the tetrahydrofuran ring, which are most readily produced from furfural, are discussed here. 

Sugar is destroyed by pH extremes, and inadequate pH control can cause significant sucrose losses in sugar mills. Sucrose is one of the most acid-labile disaccharides known (27), and its hydrolysis to invert is readily catalyzed by heat and low pH prolonged exposure converts the monosaccharides to hydroxymethyl furfural, which has appHcations for synthesis of glycols, ethers, polymers, and pharmaceuticals (16,30). The molecular mechanism that occurs during acid hydrolysis operates, albeit slowly, as high as pH 8.5 (18). 

Solvent for Displacement Reactions. As the most polar of the common aprotic solvents, DMSO is a favored solvent for displacement reactions because of its high dielectric constant and because anions are less solvated in it (87). Rates for these reactions are sometimes a thousand times faster in DMSO than in alcohols. Suitable nucleophiles include acetyUde ion, alkoxide ion, hydroxide ion, azide ion, carbanions, carboxylate ions, cyanide ion, hahde ions, mercaptide ions, phenoxide ions, nitrite ions, and thiocyanate ions (31). Rates of displacement by amides or amines are also greater in DMSO than in alcohol or aqueous solutions. Dimethyl sulfoxide is used as the reaction solvent in the manufacture of high performance, polyaryl ether polymers by reaction of bis(4,4 -chlorophenyl) sulfone with the disodium salts of dihydroxyphenols, eg, bisphenol A or 4,4 -sulfonylbisphenol (88). These and related reactions are made more economical by efficient recycling of DMSO (89). Nucleophilic displacement of activated aromatic nitro groups with aryloxy anion in DMSO is a versatile and useful reaction for the synthesis of aromatic ethers and polyethers (90). 

Although no longer of significant commercial interest, the characteristics of some of the amorphous homopolymers commercially available at one time or another are illustrated in Table 4. No crystalline polymers are known to have been commercialized. This lack of commercial success results from the economically competitive situation concerning vinyl ether polymers versus other, more readily available polymers such as those based on acryUc and vinyl ester monomers. 

The poly(vinyl ethers), whieh were first made available in Germany before 1940, are not of importance in the plastics industry but have applications in adhesives, surfaee coatings and rubber technology. Of the many vinyl ether polymers prepared, only those from the vinyl alkyl ethers and some halogenated variants are of interest. Two methods of monomer preparations may be used. 

Crystallisable polymers have also been prepared from diphenylol compounds containing sulphur or oxygen atoms or both between the aromatic rings. Of these the polycarbonates from di-(4-hydroxyphenyl)ether and from di-(4-hydroxy-phenyl)sulphide crystallise sufficiently to form opaque products. Both materials are insoluble in the usual solvents. The diphenyl sulphide polymer also has excellent resistance to hydrolysing agents and very low water absorption. Schnell" quotes a water absorption of only 0.09% for a sample at 90% relative humidity and 250°C. Both the sulphide and ether polymers have melting ranges of about 220-240°C. The di-(4-hydroxyphenyl)sulphoxide and the di-(4-hydroxy-phenyl)sulphone yield hydrolysable polymers but whereas the polymer from the former is soluble in common solvents the latter is insoluble. 

The case of interactions between salts and polymers was argued by a clear decreases of the T1 relaxation values of the polymer carbons as a result of the coordination of the ether polymer molecules with the alkali metal. The same behaviour was observed in the presence of plasticizers, indicating that the polymer ether molecules are still involved in the alkali metal coordination. 

Figure 3.3. Synthesis of trifluorovinyl ether monomers and perfluorocyclobutane aromatic ether polymers.

Figure 14.8. Synthesis of perfluoro crown ether polymer.

The new perfluoro crown ether polymer is currently under investigation in regard to its binding abilities of several gas molecules. 

Thia-8-oxoguanosine, 2 823 Thiaboranes, 4 170, 204 preparation, 4 205 Thiacrown ether monomers, 23 707 Thiacrown ether polymer ligands, 23 702 Thiamine, 2 737-738, 25 781, 795-796. 

---