Enol acetate, preparation

Owing to the instability of a-halogenoaldehydes it is occasionally preferable to use more stable derivatives, such as enol acetate prepared according to Bedoukian s method (204) and a-bromoacetals (4, 8, 10, 16, 22, 67, 101, 426). An advantage is said to be in the yield however, this appears to be slight. The derivatives react in the same sense as the aldehydes themselves, that is, the acetal group as the more polarized reacts first and enters the C-4 position. It is likely that the condensation and cyclization occur by direct displacement of alkoxide ions. Ethyl-a,/3-dihalogeno ethers (159, 164, 177, 248) have also been used in place of the free aldehydes in condensation with thioamides. 

The selectivity is probably impaired by bromination at C-2 and C-9. Bromination under buffered conditions of the A -enol acetate prepared from acetic anhydride with perchloric acid catalysis may give better results. See also ref. 55 for a similar bromination. 

The yields of enol acetates prepared by boiling the aldehydes with acetic anhydride and potassium acetate range from 40%-60%, and the a-bromo-aldehyde dimethyl acetals ate formed in about 80% yield. These products can be hydrolyzed with varying yields to the a-bromoaldehydes. A typical example is the synthesis of a-bromoheptaldehyde (40% over-all). ... 

Not only silyl end ethers but also enol acetates prepared from saturated ketones give a,/3-unsaturated ketones by heating with allyl methyl carbonate in the presence of Pd(II)(OAc)2 and dppe with tributyltin methoxide as a bimetallic catalyst (Scheme 12). Regioselective generation of palladium(II) enolate intermediate is simply carried out by treatment of allyl enol carbonates, which are prepared by trapping of ketone enolates with chloroformate, with Pd(II)(OAc)2 in the presence of dppe (Scheme 13). 7r-Allylpal-ladium(II) enolates thus generated provide a,/3-nnsatnrated ketones. 

The majority of preparative methods which have been used for obtaining cyclopropane derivatives involve carbene addition to an olefmic bond, if acetylenes are used in the reaction, cyclopropenes are obtained. Heteroatom-substituted or vinyl cydopropanes come from alkenyl bromides or enol acetates (A. de Meijere, 1979 E. J. Corey, 1975 B E. Wenkert, 1970 A). The carbenes needed for cyclopropane syntheses can be obtained in situ by a-elimination of hydrogen halides with strong bases (R. Kdstcr, 1971 E.J. Corey, 1975 B), by copper catalyzed decomposition of diazo compounds (E. Wenkert, 1970 A S.D. Burke, 1979 N.J. Turro, 1966), or by reductive elimination of iodine from gem-diiodides (J. Nishimura, 1969 D. Wen-disch, 1971 J.M. Denis, 1972 H.E. Simmons, 1973 C. Girard, 1974),... 

The isoflavone 406 is prepared by the indirect a-phenylation of a ketone by reaction of phenylmercury(II) chloride with the enol acetate 405, prepared from 4-chromanone[371]. A simple synthesis of pterocarpin (409) has been achieved based on the oxypalladation of the oriho-mercurated phenol derivative 408 with the cyclic alkene 407[372,373]. 

Preparation of o,/3-Unsaturated Carbonyl Compounds by the Reactions of Silyl Enol Ethers and Enol Acetates with Ally Carbonates... 

Another preparative method for the enone 554 is the reaction of the enol acetate 553 with allyl methyl carbonate using a bimetallic catalyst of Pd and Tin methoxide[354,358]. The enone formation is competitive with the allylation reaction (see Section 2.4.1). MeCN as a solvent and a low Pd to ligand ratio favor enone formation. Two regioisomeric steroidal dienones, 558 and 559, are prepared regioselectively from the respective dienol acetates 556 and 557 formed from the steroidal a, /3-unsaturated ketone 555. Enone formation from both silyl enol ethers and enol acetates proceeds via 7r-allylpalladium enolates as common intermediates. 

Although ethereal solutions of methyl lithium may be prepared by the reaction of lithium wire with either methyl iodide or methyl bromide in ether solution, the molar equivalent of lithium iodide or lithium bromide formed in these reactions remains in solution and forms, in part, a complex with the methyllithium. Certain of the ethereal solutions of methyl 1ithium currently marketed by several suppliers including Alfa Products, Morton/Thiokol, Inc., Aldrich Chemical Company, and Lithium Corporation of America, Inc., have been prepared from methyl bromide and contain a full molar equivalent of lithium bromide. In several applications such as the use of methyllithium to prepare lithium dimethyl cuprate or the use of methyllithium in 1,2-dimethyoxyethane to prepare lithium enolates from enol acetates or triraethyl silyl enol ethers, the presence of this lithium salt interferes with the titration and use of methyllithium. There is also evidence which indicates that the stereochemistry observed during addition of methyllithium to carbonyl compounds may be influenced significantly by the presence of a lithium salt in the reaction solution. For these reasons it is often desirable to have ethereal solutions... 

Enol ethers, A -3-ketones and enol acetates have also been employed in the preparation of A -3-ketones (see also sections VI-B and VI-E) and permit the use of milder conditions than do A -3-ketones. ... 

Enol acetates are readily prepared from saturated ketones by reaction with acetic anhydride alone or diluted, in the presence of acetyl chloride ... 

Enol ethers of 17-ketones are formed by pyrolysis of the corresponding dialkyl ketals and enol acetates are readily prepared by the exchange procedure.The latter derivatives are widely used as reactive intermediates for the introduction of substituents at C-16. 

The dimethyl acetal (94) is readily prepared from the 22-aldehyde (93) by direct reaction with methanol in the presence of hydrogen chloride. Ena-mines (95) are formed without a catalyst even with the poorly reactive piperidine and morpholine.Enol acetates (96) are prepared by refluxing with acetic anhydride-sodium acetate or by exchange with isopropenyl acetate in pyridine.Reaction with acetic anhydride catalyzed by boron trifluoride-etherate or perchloric acid gives the aldehyde diacetate. 

A 20) oiefin Formation via Enol Acetates and Ozonolysis A stock solution of acetylating mixture is prepared by dissolving 0.2 ml of 70-72% perchloric acid in 5 ml of acetic anhydride. To a solution of 5 g of 3a,6a-diacetoxy-5jff-pregnan-20-one in 50 ml of carbon tetrachloride is added 5 ml of the above stock perchloric acid-acetic anhydride solution and the mixture is allowed to stand at room temperature for 1.25 hr. The mixture is... 

Reactions of fluoroxytrifluoromethane with enol ethers, enol acetates, and enamines [/, 2, 3] are very useful, especially for the preparation of steroidal ct-fluoTo ketones (Table 2, entries 1, 3, 5, 6, and 7) [7] (equation 12)... 

There is a growing interest in the tin enolates that can be prepared by treating enol acetates with trialkyltin methoxides, e.g. (193),... 

The enol acetates, in turn, can be prepared by treatment of the parent ketone with an appropriate reagent. Such treatment generally gives a mixture of the two enol acetates in which one or the other predominates, depending on the reagent. The mixtures are easily separable. An alternate procedure involves conversion of a silyl enol ether (see 12-22) or a dialkylboron enol ether (an enol borinate, see p. 560) to the corresponding enolate ion. If the less hindered enolate ion is desired (e.g., 126), it can be prepared directly from the ketone by treatment with lithium diisopropylamide in THE or 1,2-dimethoxyethane at —78°C. ... 

After succeeding in the asymmetric reductive acylation of ketones, we ventured to see if enol acetates can be used as acyl donors and precursors of ketones at the same time through deacylation and keto-enol tautomerization (Scheme 8). The overall reaction thus corresponds to the asymmetric reduction of enol acetate. For example, 1-phenylvinyl acetate was transformed to (f )-l-phenylethyl acetate by CALB and diruthenium complex 1 in the presence of 2,6-dimethyl-4-heptanol with 89% yield and 98% ee. Molecular hydrogen (1 atm) was almost equally effective for the transformation. A broad range of enol acetates were prepared from ketones and were successfully transformed into their corresponding (7 )-acetates under 1 atm H2 (Table 19). From unsymmetrical aliphatic ketones, enol acetates were obtained as the mixtures of regio- and geometrical isomers. Notably, however, the efficiency of the process was little affected by the isomeric composition of the enol acetates. 

Trialkylstannyl enolates can be prepared from enol acetates by reaction with trialkyltin alkoxides and are sufficiently reactive to add to aldehydes. Uncatalyzed addition of trialkylstannyl enolates to benzaldehyde shows anti stereoselectivity.31... 

The stereochemistry of the silyl ketene acetal can be controlled by the conditions of preparation. The base that is usually used for enolate formation is lithium diisopropyl-amide (LDA). If the enolate is prepared in pure THF, the F-enolate is generated and this stereochemistry is maintained in the silyl derivative. The preferential formation of the F-enolate can be explained in terms of a cyclic TS in which the proton is abstracted from the stereoelectronically preferred orientation perpendicular to the carbonyl plane. The carboxy substituent is oriented away from the alkyl groups on the amide base. 

Nitration of ketones or enol ethers provides a useful method for the preparation of a-nitro ketones. Direct nitration of ketones with HN03 suffers from the formation of a variety of oxidative by-products. Alternatively, the conversion of ketones into their enolates, enol acetates, or enol ethers, followed by nitration with conventional nitrating agents such as acyl nitrates, gives a-nitro ketones (see Ref. 79, a 1980 review). The nitration of enol acetates of alkylated cyclohexanones with concentrated nitric acid in acetic anhydride at 15-22 °C leads to mixtures of cis- and rrans-substituted 2-nitrocyclohexanones in 75-92% yield. 4-Monoalkylated acetoxy-cyclohexanes give mainly m-compounds, and 3-monoalkylated ones yield fra/w-compounds (Eq. 2.40).80... 

Nitration of the potassium enolates of cycloalkanones with pentyl nitrate81 or nitration of silyl enol ethers with nitronium tetrafluoroborate82 provides a method for the preparation of cyclic a-nitro ketones. Trifluoroacetyl nitrate generated from trifluoroacetic anhydride and ammonium nitrate is a mild and effective nitrating reagent for enol acetates (Eq. 2.41).83... 

Because the a-nitroketones are prepared by the acylation of nitroalkanes (see Section 5.2), by the oxidation of (3-nitro alcohols (Section 3.2.3), or by the nitration of enol acetates (Section 2.2.5), denitration of a-nitro ketones provides a useful method for the preparation of ketones (Scheme 7.10). A simple synthesis of cyclopentenone derivatives is shown in Eq. 7.66.76... 

---