Enantiomeric chiral auxiliary

The optimum conditions have been thoroughly worked out,318,431 although a direct comparison of the diastereodirecting efficiency of various oxazolidinones does not appear to have been made for animations. However, they all direct the incoming electrophile to the less hindered side of the Z-enolate as illustrated in Eqs. 127431 and 128.434 The diastereomer with the opposite configuration at the amination site can be obtained using the enantiomeric chiral auxiliary or from the same V-acy Ioxazolidinone by a bromination/SN2 displacement sequence (Eq. 129)431 or a hydroxylation/Mitsunobu reaction protocol.427... 

The enantiomeric behavior of the quasi-enantiomeric chiral auxiliaries is clearly shown by the reported aldol condensations [16], each generating only one of the possible four isomeric aldols. It must be noted that a recent modification of the reaction conditions allowed the preparation also of anti products from these auxiliaries [17]. 

Clearly, there is a need for techniques which provide access to enantiomerically pure compounds. There are a number of methods by which this goal can be achieved . One can start from naturally occurring enantiomerically pure compounds (the chiral pool). Alternatively, racemic mixtures can be separated via kinetic resolutions or via conversion into diastereomers which can be separated by crystallisation. Finally, enantiomerically pure compounds can be obtained through asymmetric synthesis. One possibility is the use of chiral auxiliaries derived from the chiral pool. The most elegant metliod, however, is enantioselective catalysis. In this method only a catalytic quantity of enantiomerically pure material suffices to convert achiral starting materials into, ideally, enantiomerically pure products. This approach has found application in a large number of organic... 

Since most often the selective formation of just one stereoisomer is desired, it is of great importance to develop highly selective methods. For example the second step, the aldol reaction, can be carried out in the presence of a chiral auxiliary—e.g. a chiral base—to yield a product with high enantiomeric excess. This has been demonstrated for example for the reaction of 2-methylcyclopenta-1,3-dione with methyl vinyl ketone in the presence of a chiral amine or a-amino acid. By using either enantiomer of the amino acid proline—i.e. (S)-(-)-proline or (/ )-(+)-proline—as chiral auxiliary, either enantiomer of the annulation product 7a-methyl-5,6,7,7a-tetrahydroindan-l,5-dione could be obtained with high enantiomeric excess. a-Substituted ketones, e.g. 2-methylcyclohexanone 9, usually add with the higher substituted a-carbon to the Michael acceptor ... 

With this epoxidation procedure it is possible to convert the achiral starting material—i.e. the allylic alcohol—with the aim of a chiral reagent, into a chiral, non-racemic product in many cases an enantiomerically highly-enriched product is obtained. The desired enantiomer of the product epoxy alcohol can be obtained by using either the (-1-)- or (-)- enantiomer of diethyl tartrate as chiral auxiliary ... 

Enantiomerically pure (2, 35)-3-hydroxy-2,4-dimethylpentanoic acid is liberated by a Bacycr-Villigcr oxidation which occurs in a nonrcgiosclcctivc manner. Furthermore, the chiral auxiliary information is lost in the final step ( immolative method )41. 

Chiral imines derived from 1-phenylethanone and (I. Sj-exo-l, 7,7-trimethyIbicyclo-[2.2.1]heptan-2-amine [(S)-isobornylamine], (.S>1-phenylethanamine or (R)-l-(1-naphthyl) ethanamine are transformed into the corresponding (vinylamino)dichloroboranes (e.g., 3) by treatment with trichloroborane and triethylamine in dichloromethane. Reaction of the chiral boron azaenolates with aromatic aldehydes at 25 "C, and subsequent acidic hydrolysis, furnishes aldol adducts with enantiomeric excesses in the range of 2.5 to 47.7%. Significantly lower asymmetric inductions are obtained from additions of the corresponding lithium and magnesium azaenolates. Best results arc achieved using (.S )-isobornylamine as the chiral auxiliary 3. 

In Ugi four-component reactions (for mechanism, see Section 1.4.4.1.) all four components may potentially serve as the stereodifferentiating tool65. However, neither the isocyanide component nor the carboxylic acid have pronounced effects on the overall stereodiscrimination60 66. As a consequence, the factors influencing the stereochemical course of Ugi reactions arc similar to those in Strecker syntheses. The use of chiral aldehydes is commonly found in substrate-controlled syntheses whereas the asymmetric synthesis of new enantiomerically pure compounds via Ugi s method is restricted to the application of optically active amines as the chiral auxiliary group. 

In y-alkoxyfuranones the acetal functionality is ideally suited for the introduction of a chiral auxiliary simultaneously high 71-face selectivity may be obtained due to the relatively rigid structure that is present. With ( + )- or (—(-menthol as auxiliaries it is possible to obtain both (5S)- or (5/ )-y-menthyloxy-2(5//)-furanones in an enantiomerically pure form293. When the auxiliary acts as a bulky substituent, as in the case with the 1-menthyloxy group, the addition of enolates occurs trans to the y-alkoxy substituent. The chiral auxiliary is readily removed by hydrolysis and various optically active lactones, protected amino acids and hydroxy acids are accessible in this way294-29s-400. 

Asymmetric Michael additions using chiral auxiliary containing donors have attracted widespread attention and various methods are now available that give high enantiomeric excess. 

It has been shown that the sulfinyl group present as chiral auxiliary either in dienophiles or in dienes is very useful for controlling the enantio- and diastereofacial selectivity in the asymmetric Diels-Alder reaction [43]. A wide variety of enantiomerically pure cyclohexadienedicarboxylates has been produced by cycloaddition of the sulfinylmaleate 39 with several dienes under catalyzed... 

The stereogenic centers may be integral parts of the reactants, but chiral auxiliaries can also be used to impart facial diastereoselectivity and permit eventual isolation of enantiomerically enriched product. Alternatively, use of chiral Lewis acids as catalysts can also achieve facial selectivity. Although the general principles of control of the stereochemistry of aldol addition reactions have been well developed for simple molecules, the application of the principles to more complex molecules and the... 

Stereochemical Control Through Chiral Auxiliaries. Another approach to control of stereochemistry is installation of a chiral auxiliary, which can achieve a high degree of facial selectivity.124 A very useful method for enantioselective aldol reactions is based on the oxazolidinones 10,11, and 12. These compounds are available in enantiomerically pure form and can be used to obtain either enantiomer of the desired product. 

As oxidation also converts the original chiral terpene-derived group to an alcohol, it is not directly reusable as a chiral auxiliary. Although this is not a problem with inexpensive materials, the overall efficiency of generation of enantiomerically pure product is improved by procedures that can regenerate the original terpene. This can be done by heating the dialkylborane intermediate with acetaldehyde. The a-pinene is released and a diethoxyborane is produced.204... 

The highly ordered cyclic TS of the D-A reaction permits design of diastereo-or enantioselective reactions. (See Section 2.4 of Part A to review the principles of diastereoselectivity and enantioselectivity.) One way to achieve this is to install a chiral auxiliary.80 The cycloaddition proceeds to give two diastereomeric products that can be separated and purified. Because of the lower temperature required and the greater stereoselectivity observed in Lewis acid-catalyzed reactions, the best diastereoselectivity is observed in catalyzed reactions. Several chiral auxiliaries that are capable of high levels of diastereoselectivity have been developed. Chiral esters and amides of acrylic acid are particularly useful because the auxiliary can be recovered by hydrolysis of the purified adduct to give the enantiomerically pure carboxylic acid. Early examples involved acryloyl esters of chiral alcohols, including lactates and mandelates. Esters of the lactone of 2,4-dihydroxy-3,3-dimethylbutanoic acid (pantolactone) have also proven useful. 

The possibility of using chiral auxiliaries or chiral catalysts to achieve enantio-selective Claisen rearrangements has been explored.253 One approach is to use chiral boron enolates. For example, enolates prepared with the chiral diazaborolidine bromide O lead to rearranged products of more than 95% enantiomeric excess.254... 

A new chiral auxiliary based on a camphor-derived 8-lactol has been developed for the stereoselective alkylation of glycine enolate in order to give enantiomerically pure a-amino acid derivatives. As a key step for the synthesis of this useful auxiliary has served the rc-selective hydroformylation of a homoallylic alcohol employing the rhodium(I)/XANTPHOS catalyst (Scheme 11) [56]. 

Nitroalkenes with Chiral Auxiliaries The use of carbohydrates as chiral auxiliary in Diels-Alder reactions for the stereoselective preparation of carbocyclic and heterocyclic chiral rings is well documented.48 For example, D-manno-nitroalkene reacts with 2,3-dimethyl-1,3-butadiene to give a 65 35 mixture of adducts, as shown in Eq. 8.29. The configurations at C-4 and C-5 have been determined to be (4R,5R) and (45,55), respectively. Hydrolysis of the product followed by degradative oxidation of the sugar side chains leads to enantiomerically... 

The proposed dinuclear transition-state model (1) has been supported by the observation of nonlinear relationship between enantiomeric excess (ee) of the epoxide and ee of DAT.33 The use of simple diol instead of tartrate vitiates stereoselectivity of the reaction.34,35 The ester group of DAT is indispensable for the construction of the desired catalyst. It is noteworthy that 1,2-di(o-methoxy-phenyl)ethylenediol is an efficient chiral auxiliary for titanium-mediated epoxidation, while 1,2-diphenylethylenediol is a poor one.36... 

Model (1) further suggests that, if the substrate is a secondary allylic alcohol (R4 / 11, R5 = H or r4=h, rVh), enantiomeric alcohols are epoxidized at different rates when (R,R)-DAT is used as the chiral auxiliary, (5)-allylic alcohol (R4 f H, R5 = H) suffers less steric hindrance from the tartrate ligand and is oxidized faster than (R)-allylic alcohol (R4 = H, R5 f H).37 As the ester alkyl group of DAT becomes bulkier, the hindrance becomes more intense and the relative... 

Diastereoselective intramolecular 1,3-dipolar cycloadditions of alkylidene-cyclopropyl nitrones provide spirocyclopropylisoxazolidines. These compounds have been shown to undergo either thermally induced ring expansion to octahydro[l]pyrindin-4-ones or to acid induced ring contraction into fS-lactams with concomitant loss of ethylene (Scheme 2.218) (710-716). Use of chiral auxiliaries, that is (L)-2-acetoxylactate can lead to enantiomerically enriched heterocycles (715). 

Asymmetric carboxylation was also achieved by use of 7r-allyltitanium complexes bearing chiral ligands (Scheme 13).26 The enantiomeric selectivity was significantly influenced by the chiral auxiliary ligands used. In the case of 45, the chiral /3,7-unsaturated carboxylic acid 46 was obtained with excellent ee.27,28... 

Two methods have been developed to provide enantiomerically enriched cycloadducts using the chromium-mediated [6 + 2]- and [6 + 4]-cycloadditions one involving a chiral resolution and the other involving the attachment of a chiral auxiliary to the triene. The lipase resolution method provides access to either enantiomer of the chromium complex, albeit with moderate enantiomeric excesses (Scheme 34).119 The [6 + 4]- and [6 + 2]-reactions of chiral substrates such as 116 which are available by the attachment of a removable chiral auxiliary (R ) to the triene moiety are highly diastereoselective (Equation (17)).120... 

One example of the use of 2D-NMR experiments in conformational analysis is the study of molecular interactions between cinchonidine and acetic acid [26]. These alkaloids are used as chiral auxiliaries in enantioselective hydrogenations, and the enantiomeric excess is dependent on solvent polarity, acetic acid being a good solvent This suggests that protonation and a preferred conformation play a role in achieving high enantioselectivities. With a combination of COSY-experiments, 3J coupling constants and NOESY experiments, it was shown that one conformer is preferred in acidic solutions. 

---