Emissions monitoring INDEX

Demirgian J. 1992. Continuous emission monitor for incinerators. Govt Reports Announcements Index (GRA I), Issue 23, 1992. 

Project management of landfill emissions monitoring works (e.g., biogas production, leachates, and settlements) and register online chemical indexes... 

By studying the coal face gas emission characteristics, dividing the gas emission evaluation index into three types static index, dynamic index and key monitoring index. For different types of index. 

Source sampling of particulates requites isokinetic removal of a composite sample from the stack or vent effluent to determine representative emission rates. Samples are coUected either extractively or using an in-stack filter EPA Method 5 is representative of extractive sampling, EPA Method 17 of in-stack filtration. Other means of source sampling have been used, but they have been largely supplanted by EPA methods. Continuous in-stack monitors of opacity utilize attenuation of radiation across the effluent. Opacity measurements are affected by the particle size, shape, size distribution, refractive index, and the wavelength of the radiation (25,26). 

Fluorescence detection at 284/310 nm (extinction/ emission wavelengths) leads to a detection limit of 1.3 mmol/L (0.14 mg/mL for / -cresol). Identification of phenol and /7-cresol may be confirmed by liquid chroma- tography/mass spectrometry. Because HPLC methods require only simple extraction, e.g., by ethyl acetate, and do not require further steps such as derivatization, they j are simple and rapid compared with gas chromatography or gas chromatography/mass spectrometry. Such methods I are useful for monitoring serum phenols in dialyzed patients as an index of hemodialysis adequacy. How- ever, the separation of the three isomers of cresol can only be performed by adding 3-cyclodextrin to the c liquid phase. q... 

In a similar manner to energy, Elf Atochem also uses a carbon emissions index (CEI) to monitor reductions in C02. Since 1980 the CEI has improved by 50% ... 

There are different spectrophotometric techniques for analysis of contaminants in biofuels. Simultaneous detection of the absorption spectrum and refractive index ratio with a spectrophotometer for monitoring contaminants in bioethanol has been carried out by Kontturi et al., 2011. Inductively Coupled Plasma Atomic Emission Spectrometry and optical emission spectral analysis with inductively coupled plasma (ICP-OES) have also been used to analyze biodiesel samples for trace metals (ASTM, 2007 ECS, 2006). An ICP-MS instrument fitted with an octopole reaction system (ORS) was used to directly measure the inorganic contents of several biofuel materials. Following sample prepwation by simple... 

---