Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Elevated storage reservoirs

Elevated storage reservoir shall be located centrally/near to as many process units as possible which need water always. The bottom outlet valve shall be operated by a solenoid control, and it shall open when power fails. It shall supply water to emergency use points such scmbbers, cooling jackets, electrode cooling, etc. [Pg.98]

Typical water balance for a chemical process industry. Notes 1. Elevated Storage Reservoir is for supplying water in case of emergency to important units. 2. Process units can also be supplied Low Pressure steam (for heating) from tapping provided on Steam Turbine for Power generation... [Pg.193]

The volume of elevated storage reservoir (ESR) can be calculated from these figures, and the cost of tank plus support structure, water piping for filling and pump cost can be estimated. A convenient location for the tank in the premises should be decided. It should be as near as the important user points as possible. [Pg.224]

For oil systems, commonly referred to as hot oil systems, a reservoir is sometimes provided in an elevated storage tank. The fire risks associated with hot oil systems comprise the temperature of the circulating oil, location of transfer pumps, and protection of the storage reservoir. [Pg.373]

American Water Works Association (AWWA) The association has many standards deahng with water handling and storage. A list of its publications is given in the AWWA Handbook (annually). AWWA DlOO, Standard for Steel Tanks—Standpipes, Reservoirs, and Elevated Tanks for Water Storage, contains rules for design and fabrication. [Pg.1016]

Speicher, to. loft, granary, warehouse, storehouse, elevator reservoir storer, accumulator. -batterie,/. storage battery, -gestein,... [Pg.417]

In the case of reservoir systems that rely on the cohesivity of the blend due to interparticle interactions, studies are required on vibrational stability in simulated storage, transport, and use tests, including determination of the effects of elevated temperature and humidity. [Pg.654]

ANSI-AWWA Standard DIOO. Water Steel Tanks for Water Storage, American Water Works Association (AWWA), Denver, Colorado. ANSI/AWWA Standard DlOl. Inspecting and Repairing Steel Water Tanks, Standpipes, Reservoirs, and Elevated Tanks, for Water Storage, American Water Works Association, Denver, Colorado. [Pg.15]

AWWA D 100, Standard for welded steel elevated tanks, standpipes, and reservoirs for water storage. [Pg.243]

Most water tanks are built in accordance with the American Water Works Association Standard for Welded Steel Elevated Tanks, Standpipes, and Reservoirs for Water Storage. ITte standard gives few specific equations for the... [Pg.261]


See other pages where Elevated storage reservoirs is mentioned: [Pg.25]    [Pg.195]    [Pg.3]    [Pg.25]    [Pg.195]    [Pg.3]    [Pg.129]    [Pg.236]    [Pg.219]    [Pg.391]    [Pg.1004]    [Pg.242]    [Pg.142]    [Pg.558]    [Pg.333]    [Pg.1175]    [Pg.1178]    [Pg.456]    [Pg.25]    [Pg.502]    [Pg.643]    [Pg.767]    [Pg.1676]    [Pg.454]    [Pg.283]   
See also in sourсe #XX -- [ Pg.195 ]




SEARCH



Elevated Storage Reservoirs (ESR)

© 2024 chempedia.info