Voltaic cells electrodes

Anode the electrode in a galvanic or voltaic cell at which electrochemical oxidation takes place. 

In principle at least, any spontaneous redox reaction can serve as a source of energy in a voltaic cell. The cell must be designed in such a way that oxidation occurs at one electrode (anode) with reduction at the other electrode (cathode). The electrons produced at the anode must be transferred to the cathode, where they are consumed. To do this, the electrons move through an external circuit, where they do electrical work. 

This reaction, like that between Zn and Cu2+, can serve as a source of electrical energy in a voltaic cell The cell is similar to that shown in Figure 18.2 except that, in the anode compartment, a nickel electrode is surrounded by a solution of a nickel(II) salt, such as NiCl2 or NiS04. The cell notation is Ni Ni2+ Cu2+ Cu. 

A voltaic cell using this reaction is similar to the Zn-Cu2+ cell the Zn Zn2+ half-cell and the salt bridge are the same. Because no metal is involved in the cathode half-reaction, an inert electrode that conducts an electric current is used. Frequently, the cathode is made of platinum (Figure 18.3, p. 484). In the cathode, Co3+ ions are provided by a solution of Co(N03)3. The half-reactions occurring in the cell are... 

A Zn-Co3+ voltaic cell. A platinum electrode is immersed in a solution containing Co3+ and Co2+ ions.The spontaneous cell reaction is... 

Draw a diagram for a voltaic cell, labeling electrodes and direction of current flow. (Example 18.1 Problems 3-8) Questions and Problems assignable in OWL 2,6... 

A voltaic cell consists of two half-cells. One of the half-cells contains a platinum electrode surrounded by chromium(III) and dichromate ions. The other half-cell contains a platinum electrode surrounded by bromate ions and liquid bromine. Assume that the cell reaction, which produces a positive voltage, involves both chromium(III) and bromate ions. The cell is at 25°C. Information for the bromate reduction half reaction is as follows ... 

An interesting application of electrode potentials is to the calculation of the e.m.f. of a voltaic cell. One of the simplest of galvanic cells is the Daniell cell. It consists of a rod of zinc dipping into zinc sulphate solution and a strip of copper in copper sulphate solution the two solutions are generally separated by placing one inside a porous pot and the other in the surrounding vessel. The cell may be represented as ... 

The reaction may be regarded as taking place in a voltaic cell, the two half-cells being a C12,2C1 system and a Fe3+,Fe2+ system. The reaction is allowed to proceed to equilibrium, and the total voltage or e.m.f. of the cell will then be zero, i.e. the potentials of the two electrodes will be equal ... 

Anode. The anode is the electrode at which oxidation occurs. It is the positive terminal of an electrolysis cell or the negative terminal of a voltaic cell. 

Voltaic cells 64. 504 Voltammetry 7, 591 anodic stripping, 621 concentration step, 621 mercury drop electrode, 623 mercury film electrode, 623 peak breadth, 622 peak current, 622 peak potential, 622 purity of reagents, 624 voltammogram, 622 D. of lead in tap water, 625 Volume distribution coefficient 196 Volume of 1 g of water at various temperatures, (T) 87... 

A voltaic cell consists essentially of three parts two electrodes, from which the positive and negative electricity leave the cell, and an electrolyte in which the electrodes are contained. Its form is therefore that of an electrolytic cell, and the difference between the two lies only in the condition that in the former we produce an electric current through the agency of the material changes, whereas in the latter we induce these material changes by a current supplied from an external source the same arrangement may therefore serve as either. The direction in which the current flows through the cell will depend on the potential difference between its terminals. 

Similar considerations apply of course to the opposing electromotive forces of polarisation during electrolysis, when the process is executed reversibly, since an electrolytic cell is, as we early remarked, to be considered as a voltaic cell working in the reverse direction. In this way Helmholtz (ibid.) was able to explain the fluctuations of potential in the electrolysis of water as due to the variations of concentration due to diffusion of the dissolved gases. It must not be forgotten, however, that peculiar phenomena—so-called supertension effects—depending on the nature of the electrodes, make their appearance here, and com-... 

Rabinovich et al. have shown that it is possible to propose an extrather-modynamic definition of single-ion activity, a, as a function of the real potentials of those particles. "" By carrying out the measurements of voltaic cells containing electrodes reversible to the same ionic species in solutions of different concentrations in the same solvent. 

The determination of the real energies of solvation from measurements of the voltaic cells (Section VI) makes it possible to find the absolute electrode potentials in nonaqueous solvents owing to the relation... 

The non situ experiment pioneered by Sass uses a preparation of an electrode in an ultrahigh vacuum through cryogenic coadsorption of known quantities of electrolyte species (i.e., solvent, ions, and neutral molecules) on a metal surface. " Such experiments serve as a simulation, or better, as a synthetic model of electrodes. The use of surface spectroscopic techniques makes it possible to determine the coverage and structure of a synthesized electrolyte. The interfacial potential (i.e., the electrode work function) is measured using the voltaic cell technique. Of course, there are reasonable objections to the UHV technique, such as too little water, too low a temperature, too small interfacial potentials, and lack of control of ionic activities. ... 

This review has been restricted mainly to clarification ofthe fundamentals and to presenting a coherent view ofthe actual state of research on voltaic cells, as well as their applications. Voltaic cells are, or may be, used in various branches of electrochemistry and surface chemistry, both in basic and applied research. They particularly enable interpretations of the potentials of various interphase and electrode boundaries, including those that are employed in galvanic and electroanalytical cells. 

Thus, the Volta potential may be operationally defined as the compensating voltage of the cell of Scheme 16. However, it should be stressed that the compensating voltage of a voltaic cell is not always the direct measure of the Volta potential. The appropriate mutual arrangement of phases, as well as application of reversible electrodes or salt bridges in the systems, allows measurement of not only the Volta potential but also the surface and the Galvani potentials. These possibilities are schematically illustrated by [15]... 

The cathode is defined as the electrode at which reduction occurs, i.e., where electrons are consumed, regardless of whether the electrochemical cell is an electrolytic or voltaic cell. In both electrolytic and voltaic cells, the electrons flow through the wire from the anode, where electrons are produced, to the cathode, where electrons are consumed. In an electrolytic cell, the dc source forces the electrons to travel nonspontaneously through the wire. Thus, the electrons flow from the positive electrode (the anode) to the negative electrode (the cathode). However, in a voltaic cell, the electrons flow spontaneously, away from the negative electrode (the anode) and toward the positive electrode (the cathode). 

A voltaic cell is composed of a copper electrode (Cu) dipping into a solution of copper ions (Cu+2) and a mercury electrode in a solution of Hg2+ ions. The cell reaction is... 

A half-cell describes a single electrode and its associated chemical reaction which forms part of a voltaic cell. 

Potentiometry involves the use of electrode systems known as voltaic cells... 

Construct voltaic cells using various combinations of metals for electrodes. 

The electrochemical cell with zinc and copper electrodes had an overall potential difference that was positive (+1.10 volts), so the spontaneous chemical reactions produced an electric current. Such a cell is called a voltaic cell. In contrast, electrolytic cells use an externally generated electrical current to produce a chemical reaction that would not otherwise take place. 

---