Electrochemical deposition acid-base reactions

Thirdly, in order to improve the dispersion of platinum catalysts deposited on carbon materials, the effects of surface plasma treatment of carbon blacks (CBs) were investigated. The surface characteristics of the CBs were determined by fourier transformed-infrared (FT-IR), X-ray photoelectron spectroscopy (XPS), and Boehm s titration method. The electrochemical properties of the plasma-treated CBs-supported Pt (Pt/CBs) catalysts were analyzed by linear sweep voltammetry (LSV) experiments. From the results of FT-IR and acid-base values, N2-plasma treatment of the CBs at 300 W intensity led to a formation of a free radical on the CBs. The peak intensity increased with increase of the treatment time, due to the formation of new basic functional groups (such as C-N, C=N, -NHs, -NH, and =NH) by the free radical on the CBs. Accordingly, the basic values were enhanced by the basic functional groups. However, after a specific reaction time, Nz-plasma treatment could hardly influence on change of the surface functional groups of CBs, due to the disappearance of free radical. Consequently, it was found that optimal treatment time was 30 second for the best electro activity of Pt/CBs catalysts and the N2-plasma treated Pt/CBs possessed the better electrochemical properties than the pristine Pt/CBs. 

The formation of colloidal sulfur occurring in the aqueous, either alkaline or acidic, solutions comprises a serious drawback for the deposits quality. Saloniemi et al. [206] attempted to circumvent this problem and to avoid also the use of a lead substrate needed in the case of anodic formation, by devising a cyclic electrochemical technique including alternate cathodic and anodic reactions. Their method was based on fast cycling of the substrate (TO/glass) potential in an alkaline (pH 8.5) solution of sodium sulfide, Pb(II), and EDTA, between two values with a symmetric triangle wave shape. At cathodic potentials, Pb(EDTA)2 reduced to Pb, and at anodic potentials Pb reoxidized and reacted with sulfide instead of EDTA or hydroxide ions. Films electrodeposited in the optimized potential region were stoichiometric and with a random polycrystalline RS structure. The authors noticed that cyclic deposition also occurs from an acidic solution, but the problem of colloidal sulfur formation remains. 

On the other hand, the loadings of Ru deposits were lower than those of Pt deposits at both deposition potentials. In addition, the Pt-Ru catalysts electrodeposited on CNT/CC formed solid solutions, as confirmed by XRD analyses [65]. Through the electrochemical tests of methanol oxidation on the working specimens, it was found that the specimens with Pt-Ru catalysts exhibited better electroactivity (current density of methanol oxidation per unit Pt loading mass) than the specimens with only Pt (Figure 20.13). Direct electrooxidation is a very complex reaction because many intermediate species are involved. In an acidic medium this reaction requires platinum-based catalysts, even though Pt exhibits rather low activity [66]. 

---