Electric current efficiency

For the industrial process a platinum anode and steel plate cathode are used, and a small amount of potassium bichromate is added to the electrolyte, The electric current efficiency is good when the concentration of the sodium chlorate is high, but it suddenly decreases as the concentration falls. The double decomposition which produces potassium perchlorate is as follows ... 

Current Efficiency. Current efficiency for caustic production in diaphragm and membrane cells can be estimated from collection of a known amount of caustic over a period of time and from a knowledge of the number of coulombs of electricity passed during that time period. An alternative method involves analysis of the gases evolved during electrolysis and determining the anolyte composition. Material balance considerations (7) show the expression for the caustic efficiency for membrane cells to be... 

The theoretical amount of metal produced by electrolysis is direcdy proportional to the amount of electricity according to Faraday s law. Because of losses by chemical or electrochemical processes, the actual amount is less. It is characterized by the current efficiency, Sj defined by the foUowiag ... 

The individual membrane filtration processes are defined chiefly by pore size although there is some overlap. The smallest membrane pore size is used in reverse osmosis (0.0005—0.002 microns), followed by nanofiltration (0.001—0.01 microns), ultrafHtration (0.002—0.1 microns), and microfiltration (0.1—1.0 microns). Electro dialysis uses electric current to transport ionic species across a membrane. Micro- and ultrafHtration rely on pore size for material separation, reverse osmosis on pore size and diffusion, and electro dialysis on diffusion. Separation efficiency does not reach 100% for any of these membrane processes. For example, when used to desalinate—soften water for industrial processes, the concentrated salt stream (reject) from reverse osmosis can be 20% of the total flow. These concentrated, yet stiH dilute streams, may require additional treatment or special disposal methods. 

Commercially available membranes are usually reinforced with woven, synthetic fabrics to improve the mechanical properties. Several hundred thousand square meters of IX membranes are now produced aimuaHy, and the mechanical and electrochemical properties are varied by the manufacturers to suit the proposed appHcations. The electrochemical properties of most importance for ED are (/) the electrical resistance per unit area of membrane (2) the ion transport number, related to current efficiency (2) the electrical water transport, related to process efficiency and (4) the back-diffusion, also related to process efficiency. 

As described above, quantum restrictions limit tire contribution of tire free electrons in metals to the heat capacity to a vety small effect. These same electrons dominate the thermal conduction of metals acting as efficient energy transfer media in metallic materials. The contribution of free electrons to thermal transport is very closely related to their role in the transport of electric current tlrrough a metal, and this major effect is described through the Wiedemann-Franz ratio which, in the Lorenz modification, states that... 

Modem cells employ arrays of anodes (Ti02 coated with a noble metal) and cathodes (mild steel) spaced 3 mm apart and carrying current at 2700Am into brine (80-100gl ) at 60-80°C. Under these conditions current efficiency can reach 93% and 1 tonne of NaC103 can be obtained from 565 kg NaCl and 4535 kWh of electricity. The off-gas H2 is also collected. 

Two distinctly different coulometric techniques are available (1) coulometric analysis with controlled potential of the working electrode, and (2) coulometric analysis with constant current. In the former method the substance being determined reacts with 100 per cent current efficiency at a working electrode, the potential of which is controlled. The completion of the reaction is indicated by the current decreasing to practically zero, and the quantity of the substance reacted is obtained from the reading of a coulometer in series with the cell or by means of a current-time integrating device. In method (2) a solution of the substance to be determined is electrolysed with constant current until the reaction is completed (as detected by a visual indicator in the solution or by amperometric, potentiometric, or spectrophotometric methods) and the circuit is then opened. The total quantity of electricity passed is derived from the product current (amperes) x time (seconds) the present practice is to include an electronic integrator in the circuit. 

Electrode boilers produce hot water or steam (generally saturated steam) by conducting current through the BW. The water provides resistance, which causes heat to be generated when electrical current flows from one electrode to another. As a consequence, the electrical conductivity of the water is a primary factor in the satisfactory operation of these boilers. Other aspects of water treatment control (such as alkalinity levels, oxygen content, and foam control) and maintenance also must be considered if optimum efficiency is to be obtained. 

II. Ease of electrical connection Here the main problem is that of efficient electrical current collection, ideally with only two electrical leads entering the reactor and without an excessive number of interconnects, as in fuel cells. This is because the competitor of an electrochemically promoted chemical reactor is not a fuel cell but a classical chemical reactor. The main breakthrough here is the recent discovery of bipolar or wireless NEMCA,8 11 i.e. electrochemical promotion induced on catalyst films deposited on a solid electrolyte but not directly connected to an electronic conductor (wire). 

Metals and semiconductors are electronic conductors in which an electric current is carried by delocalized electrons. A metallic conductor is an electronic conductor in which the electrical conductivity decreases as the temperature is raised. A semiconductor is an electronic conductor in which the electrical conductivity increases as the temperature is raised. In most cases, a metallic conductor has a much higher electrical conductivity than a semiconductor, but it is the temperature dependence of the conductivity that distinguishes the two types of conductors. An insulator does not conduct electricity. A superconductor is a solid that has zero resistance to an electric current. Some metals become superconductors at very low temperatures, at about 20 K or less, and some compounds also show superconductivity (see Box 5.2). High-temperature superconductors have enormous technological potential because they offer the prospect of more efficient power transmission and the generation of high magnetic fields for use in transport systems (Fig. 3.42). 

OS 86] [R 29] [P 66] The Faradaic current efficiency, the electrical charge equivalent for conversion as a fraction of the total electrical charge, was measured for a... 

Figure 4.95 Faradaic current efficiency as electrical charge equivalent for conversion of D-gluconic acid given for two values of average current density. The symbols represent measured conversion and the solid and dashed lines calculated results [65. ...

---