Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Effect of epoxy

Kodama JK, Guzman RJ, Dunlap MK, et al Some effects of epoxy compounds on the blood. Arch Environ Health 2 56-67, 1961... [Pg.105]

Effects of Epoxy Type and Amount. Three different types of epoxies were investigated, two of them more extensively. The epoxies were 1) a bis(glycidyl ether) of bisphenol A (DER 330, Dow Chemical), 2) an epoxy novolac (DEN 431, Dow Chemical Co.), and 3) a tetra-functional epoxy, tetraglycidyl ether of 4,4 -methylene bis(aniline), (Araldite MY720, Ciba-Geigy Co.). The tetrafunctional liquid epoxy was eliminated early in the study due to the fact that too much stiffness and therefore very little loss (i.e. low damping) was imparted into the IPN. It was believed that the use of the tetrafunctional epoxy resulted in too high a crosslink density in the IPN. [Pg.370]

Zhou, 1. and Lucas, J.P., Hygrothermal effects of epoxy resin. Part II Variations of glass transition temperature, Po/ymer 40, 5513, 1999. [Pg.318]

Figure 26, Effect of epoxy content on sound absorption. Figure 26, Effect of epoxy content on sound absorption.
K. C. Clear, Effectiveness of epoxy-coated reinforcing steel , Concrete International, 1992, 5, 58—62. [Pg.269]

Swanson DW, Enlow LR. Stress Effects of Epoxy Adhesives on Ceramic Substrates and Magnetics. Proc. IMAPS Conf. Oct. 1999. [Pg.140]

Effect of Epoxy Resin Addition on the Moisture Sensitivity of Macro Defect Free Polymer-Cement Composites... [Pg.65]

Wu D, Wu L, Wang J, Sun Y, Zhang M. Effect of epoxy resin on the thermal behaviors and viscoelastic properties of polyCphenylene sulfide). Mater Chem Phys 2011 128(l-2) 274-82. [Pg.149]

Reddy, C. S. and Das, C. K. 2006. Effects of epoxy resin-modified zinc-ion-coated nanosUica on structural, thermal and dynamic mechanical properties of propylene-ethylene copolymer. Polymer International 55 923-929. [Pg.128]

Abraham and co-workers [32] described measurements of the tensile shear lap strength of bonded specimens of an epoxy imide resin derived from N-(4-carboxyphenyl) trimellitimide bonded to stainless steel. The effect of epoxy resin type on adhesive strength of the Pl-aluminium bond, are also discussed. [Pg.18]

Benaniba, M. T Belhaneche-Bensemra, N. Gelbard, G. Stabilizing effect of epoxi-dized sunflower oil on the thermal degradation of poly (vinyl chloride). Polymer Degradation and Stability, 2001, 74, 501-505. [Pg.42]

Effectiveness of Epoxy-Coated Rebar Final Report to Pennsylvania Department of Transportation, Project No 94-05. [Pg.715]

J. An, J. Ce and Y. Liu, Special effect of epoxy resin E-44 on compatibility and mechanical properties of poly(butylene terephthalate)/polyamide-6 blends, /. Appl. Polym. Sci., 60 1803-1810,1996. [Pg.179]

Oldberg, R. C., The effects of epoxy encapsulant composition on semiconductor device stability. J. Electrochem Soc Solid State Science, 118, 129 (Jan. 1971). [Pg.136]

Zhou J, Lucas JP (1999) Hygrothermal effects of epoxy resin. Part I the nature of water in epoxy. Polymer 40(20) 5505-5512... [Pg.11]

Xiao GZ, Shanahan MER (1997) Water absorption and desorption in an epoxy resin with degradation. J Polym Sci B Polym Phys 35(16) 2659-2670 Zhou J, Lucas JP (1999) Hygrothermal effects of epoxy resin. Part 1 the nature of water in epoxy. Polymer 40(20) 5505-5512... [Pg.30]

R.R.N. SaUaja, A.P. Reddy, and M. Chanda, Effect of epoxy functionalized compatibilizer on the mechanical properties of low-density poly-ethylene/plasticized tapioca starch blends, Polym. Int., 50(12) 1352-1359, December 2001. [Pg.228]

The objectives of this work are to investigate the cure behaviour and structure of bisphenol A dicyanate-novolac epoxy blends. The cure characteristics were investigated by gel time determination and dynamic DSC. To disclose the structural differences between cured cyanate-novolac epoxy blends and more traditional cyanate-diglycidyl ether systems, FTIR investigations were performed on the two kinds of blends, and in situ FTIR was used to examine the Bauer mechanism. The effects of epoxy concentration in the blend on the cure kinetics was investigated using two blends with different molar ratios, and in situ FTIR. 33 refs. [Pg.49]

See other pages where Effect of epoxy is mentioned: [Pg.213]    [Pg.48]    [Pg.26]    [Pg.635]    [Pg.770]    [Pg.284]    [Pg.632]    [Pg.1419]    [Pg.836]    [Pg.363]    [Pg.3]    [Pg.3]    [Pg.21]    [Pg.188]   


SEARCH



© 2024 chempedia.info