Double reference electrode

B. EIS with Double Reference Electrode (high frequency shunt)... 

Figure 4.23 High-frequency reference electrode impedance problems in electrochemical impedance spectroscopy. EIS with (A) single reference electrode and (B) double reference electrode (high-frequency shunt).

Figure Bl.28.8. Equivalent circuit for a tliree-electrode electrochemical cell. WE, CE and RE represent the working, counter and reference electrodes is the solution resistance, the uncompensated resistance, R the charge-transfer resistance, R the resistance of the reference electrode, the double-layer capacitance and the parasitic loss to tire ground.

In Section 8, the material on solubility constants has been doubled to 550 entries. Sections on proton transfer reactions, including some at various temperatures, formation constants of metal complexes with organic and inorganic ligands, buffer solutions of all types, reference electrodes, indicators, and electrode potentials are retained with some revisions. The material on conductances has been revised and expanded, particularly in the table on limiting equivalent ionic conductances. 

The potential difference across the electric double layer A. This cannot be determined in absolute terms but must be defined with reference to another charged interface, i.e. a reference electrode. In the case of a corroding metal the potential is the corrosion potential which arises from the mutual polarisation of the anodic and cathodic reactions constituting the overall corrosion reaction see Section 1.4). 

Some commercial electrodes are supplied with a double junction. In such arrangements, the electrode depicted in Fig. 15.1(h) is mounted in a wider vessel of similar shape which also carries a porous disc at the lower end. This outer vessel may be filled with the same solution (e.g. saturated potassium chloride solution) as is contained in the electrode vessel in this case the main function of the double junction is to prevent the ingress of ions from the test solution which may interfere with the electrode. Alternatively, the outer vessel may contain a different solution from that involved in the electrode (e.g. 3M potassium nitrate or 3M ammonium nitrate solution), thus preventing chloride ions from the electrode entering the test solution. This last arrangement has the disadvantage that a second liquid junction potential is introduced into the system, and on the whole it is preferable wherever possible to choose a reference electrode which will not introduce interferences. 

The construction of these electrodes is exactly similar to that already described for the pH responsive glass electrode. They must of course be used in conjunction with a reference electrode and for this purpose a silver-silver chloride electrode is usually preferred. A double junction reference electrode is often used. The electrode response to the activity of the appropriate cation is given by the usual Nernst equation ... 

Reference electrodes are usually a calomel or a silver-silver chloride electrode. It is advisable that these be of the double-junction pattern so that potassium chloride solution from the electrode does not contaminate the test solution. Thus, for example, in titrations involving glacial acetic acid as solvent, the outer vessel of the double junction calomel electrode may be filled with glacial acetic acid containing a little lithium perchlorate to improve the conductance. 

Figure 5.18. Schematic representation of the density of states N(E) in the conduction band and of the definitions of work function d>, chemical potential of electrons p, electrochemical potential of electrons or Fermi level p, surface potential x> Galvani (or inner) potential

The constancy of 0R with changing potential is also remarkable, as expected for a reference electrode. The deviation from Eq. (7.11) for negative potentials is due to the removal of O2 and concomitant destruction of the effective double layer. 

The reasons are analyzed in detail in Chapter 5. The equation is valid as long as the effective double layer is present at the metal/gas interfaces of the working and reference electrodes. Deviations are basically observed when ion backspillover is not faster than ion desorption or reaction (see also section 11.3). 

When the area A of the eleetrode/solution interface with a redox system in the solution varies (e.g. when using a streaming mercury electrode), the double layer capacity which is proportional to A, varies too. The corresponding double layer eharging current has to be supplied at open eireuit eonditions by the Faradaic current of the redox reaction. The associated overpotential can be measured with respect to a reference electrode. By measuring the overpotential at different capaeitive eurrent densities (i.e. Faradaic current densities) the current density vs. eleetrode potential relationship can be determined, subsequently kinetic data can be obtained [65Del3]. (Data obtained with this method are labelled OC.)... 

On the basis of this argument, the mechanism for the current oscillation and the multilayer formation can be explained as follows. First note that U is kept constant externally with a potentiostat in the present case. In the high-current stage of the current oscillation, the tme electrode potential (or Helmholtz double layer potential), E, is much more positive than U because E is given hy E=U —JAR, where A is the electrode area, R is the resistance of the solution between the electrode surface and the reference electrode, andj is taken as negative for the reduction current. This implies that, even if U is kept constant in the region of the NDR, is much more... 

The Vacuum Reference The first reference in the double-reference method enables the surface potential of the metal slab to be related to the vacuum scale. This relationship is determined by calculating the workfunction of the model metal/water/adsorbate interface, including a few layers of water molecules. The workfunction, — < ermi. is then used to calibrate the system Fermi level to an electrochemical reference electrode. It is convenient to choose the normal hydrogen electrode (NHE), as it has been experimentally and theoretically determined that the NHE potential is —4.8 V with respect to the free electron in a vacuum [Wagner, 1993]. We therefore apply the relationship... 

Nonfaradaic components associated with the uncompensated resistance between reference electrodes (7 ) and the double layer capacitance (Qi) can be accurately determined by AC impedance measurements. In this technique, a small AC potential perturbation is superimposed to the DC bias, and the resulting AC current is measured as a function of the frequency of modulation. The simplest circuit considered for a polarizable... 

FIG. 7 Simplified equivalent circuit for charge-transfer processes at externally biased ITIES. The parallel arrangement of double layer capacitance (Cdi), impedance of base electrolyte transfer (Zj,) and electron-transfer impedance (Zf) is coupled in series with the uncompensated resistance (R ) between the reference electrodes. (Reprinted from Ref. 74 with permission from Elsevier Science.)... 

As in normal potentiometry one uses and indicator electrode versus a reference electrode, the electrodes should, especially in pH measurements, be those recommended by the supplier of the pH meter in order to obtain a direct reading of the pH value displayed. In redox or other potential measurements any suitable reference electrode of known potential can be applied. However, a reference electrode is only suitable if a junction potential is excluded, e.g., an Ag-AgCl electrode in a solution of fixed Ag+ concentration or a calomel electrode in a saturated KC1 solution as a junction in many instances a direct contact of Cl" with the solution under test (possibly causing precipitation therein) is not allowed, so that an extra or so-called double junction with KN03 solution is required. Sometimes micro-electrodes or other adaptations of the surface are required. 

Cyclic voltammetry was performed on precursor polymer thin films cast on platinum electrodes in order to assess the possibility of electrochemical redox elimination and consequently as an alternative means of monitoring the process. All electrochemical experiments were performed in a three-electrode, single-compartment cell using a double junction Ag/Ag+(AgN03) reference electrode in 0.1M... 

The concentration overpotential i/c is the component of the overpotential due to concentration gradients in the electrolyte solution near the electrode, not including the electric double layer. The concentration overpotential is usually identified with the Nernst potential of the working electrode with respect to the reference electrode that is, the thermodynamic electromotive force (emf) of a concentration cell formed between the working electrode (immersed in electrolyte depleted of reacting species) and the reference electrode (of the same kind but immersed in bulk electrolyte solution) ... 

---