Double layer, electric specific adsorption

It is assumed that the quantity Cc is not a function of the electrolyte concentration c, and changes only with the charge cr, while Cd depends both on o and on c, according to the diffuse layer theory (see below). The validity of this relationship is a necessary condition for the case where the adsorption of ions in the double layer is purely electrostatic in nature. Experiments have demonstrated that the concept of the electrical double layer without specific adsorption is applicable to a very limited number of systems. Specific adsorption apparently does not occur in LiF, NaF and KF solutions (except at high concentrations, where anomalous phenomena occur). At potentials that are appropriately more negative than Epzc, where adsorption of anions is absent, no specific adsorption occurs for the salts of... 

It is postulated that one of the ions of the adsorbed 1 1 electrolyte is surface active and that it forms an ionized monolayer at the solid/liquid interface. All counterions are assumed located in the diffuse double layer (no specific adsorption). Similions are negatively adsorbed in the diffuse double layer. Since the surface-containing region must be electrically neutral, the total moles of electrolyte adsorbed, n2a, equals the total moles of counterions in the diffuse double layer which must be equal to the sum of the moles of similions in the diffuse double layer and the charged surface, A[Pg.158]

FIGURE 9.8 Gouy-Chapman-Stern electrical double layer with specific ion adsorption in the Stern layer 0 [Pg.145]

Stahlberg has presented models for ion-exchange chromatography combining the Gouy-Chapman theory for the electrical double layer (see Section V-2) with the Langmuir isotherm (. XI-4) [193] and with a specific adsorption model [194]. 

In some cases, e.g., the Hg/NaF q interface, Q is charge dependent but concentration independent. Then it is said that there is no specific ionic adsorption. In order to interpret the charge dependence of Q a standard explanation consists in assuming that Q is related to the existence of a solvent monolayer in contact with the wall [16]. From a theoretical point of view this monolayer is postulated as a subsystem coupled with the metal and the solution via electrostatic and non-electrostatic interactions. The specific shape of Q versus a results from the competition between these interactions and the interactions between solvent molecules in the mono-layer. This description of the electrical double layer has been revisited by... 

The electrical double layer has been studied at the interface of acidified (pH = 3) KCIO4 and K2SO4 solutions in contact with an Sn solid drop electrode with an additionally remelted surface (SnDER).616 The E, is independent of ctl as well as of the electrolyte. Weak specific adsorption of CIO4 at SnDER is probable around <7 = 0. This view is supported by the high value of/pz for SnDER/H20 + KCIO4 (fpz = 1 -27). A value of fpz = 0.99 for SnDER/H20 + K2S04 indicates that the surface of SnDER is geometrically smooth and free from components of pseudo-capacitance.616... 

Anodically polished and then cathodically reduced Cd + Pb alloys have been studied by impedance in aqueous electrolyte solutions (NaF, KF, NaC104, NaN02, NaN03).827 For an alloy with 2% Pb at cNap 0.03 M, Emfo = -0.88 V (SCE) and depends on cNaF, which has been explained by weak specific adsorption of F" anions. Surface activity increases in the sequence F" < CIO4 < N02. The Parsons-Zobel plot at E is linear, with /pz = 1.33 and CT° = 0.31 F m"2. Since the electrical double-layer parameters are closer to those for pc-Pb than for pc-Cd, it has been concluded that Pb is the surface-active component in Cd + Pb alloys827 (Pb has a lower interfacial tension in the liquid state). 

Conventional colloid chemistry and elaitrochemistry have always been clo ly related with each other, the keywords electrophoresis, double layer theory, and specific adsorption describing typical asp ts of this relationship. In more ro nt times, new aspects have arisen which again bring colloid chemistry into contact with modem developments in electrcolloidal particles as catalysts for electron transfer reactions and as photocatalysts. In fact, the similarity between the reactions that occur on colloidal particles and on compact electrodes has often been emphasized by calling the small particles microelectrodes . 

Fig. 4.1 Structure of the electric double layer and electric potential distribution at (A) a metal-electrolyte solution interface, (B) a semiconductor-electrolyte solution interface and (C) an interface of two immiscible electrolyte solutions (ITIES) in the absence of specific adsorption. The region between the electrode and the outer Helmholtz plane (OHP, at the distance jc2 from the electrode) contains a layer of oriented solvent molecules while in the Verwey and Niessen model of ITIES (C) this layer is absent...

Double integration with respect to EA yields the surface excess rB+ however, the calculation requires that the value of this excess be known, along with the value of the first differential 3TB+/3EA for a definite potential. This value can be found, for example, by measuring the interfacial tension, especially at the potential of the electrocapillary maximum. The surface excess is often found for solutions of the alkali metals on the basis of the assumption that, at potentials sufficiently more negative than the zero-charge potential, the electrode double layer has a diffuse character without specific adsorption of any component of the electrolyte. The theory of diffuse electrical double layer is then used to determine TB+ and dTB+/3EA (see Section 4.3.1). 

At present it is impossible to formulate an exact theory of the structure of the electrical double layer, even in the simple case where no specific adsorption occurs. This is partly because of the lack of experimental data (e.g. on the permittivity in electric fields of up to 109 V m"1) and partly because even the largest computers are incapable of carrying out such a task. The analysis of a system where an electrically charged metal in which the positions of the ions in the lattice are known (the situation is more complicated with liquid metals) is in contact with an electrolyte solution should include the effect of the electrical field on the permittivity of the solvent, its structure and electrolyte ion concentrations in the vicinity of the interface, and, at the same time, the effect of varying ion concentrations on the structure and the permittivity of the solvent. Because of the unsolved difficulties in the solution of this problem, simplifying models must be employed the electrical double layer is divided into three regions that interact only electrostatically, i.e. the electrode itself, the compact layer and the diffuse layer. 

For a long time, the electric double layer was compared to a capacitor with two plates, one of which was the charged metal and the other, the ions in the solution. In the absence of specific adsorption, the two plates were viewed as separated only by a layer of solvent. This model was later modified by Stem, who took into account the existence of the diffuse layer. He combined both concepts, postulating that the double layer consists of a rigid part called the inner—or Helmholtz—layer, and a diffuse layer of ions extending from the outer Helmholtz plane into the bulk of the solution. Accordingly, the potential drop between the metal and the bulk consists of two parts ... 

The fundamental electrochemical event, that is, electron transfer, occurs at the electrode surface. Peculiarities of electrochemical reactions include an electrical field, which in a special way complicates the phenomena of adsorption and desorption at the surface. The first layer of the solution, which is in contact with the electrode, possesses a specific structure. It is important for charged particles that the orientation of medium molecules in the vicinity of the electrode produces a decrease in dielectric permeability in the compact part of the double layer (Damaskin and Kryshtalik 1984). 

For fused silica the magnitude of the EOF is controlled by the pH value of the electrophoretic buffer used. At high pH where the silanol groups are predominantly deprotonated, the EOF is significantly greater than at low pH (pH < 4) where they become protonated. Depending on the specific conditions, the EOF can vary by more than one order of magnitude between pH 2 and pH 12. In nonionic materials such as Teflon and other polymers, electroosmotic flow is also encountered. The electrical double layer in this case results from adsorption of buffer anions to the polymer surface. 

The main, currently used, surface complexation models (SCMs) are the constant capacitance, the diffuse double layer (DDL) or two layer, the triple layer, the four layer and the CD-MUSIC models. These models differ mainly in their descriptions of the electrical double layer at the oxide/solution interface and, in particular, in the locations of the various adsorbing species. As a result, the electrostatic equations which are used to relate surface potential to surface charge, i. e. the way the free energy of adsorption is divided into its chemical and electrostatic components, are different for each model. A further difference is the method by which the weakly bound (non specifically adsorbing see below) ions are treated. The CD-MUSIC model differs from all the others in that it attempts to take into account the nature and arrangement of the surface functional groups of the adsorbent. These models, which are fully described in a number of reviews (Westall and Hohl, 1980 Westall, 1986, 1987 James and Parks, 1982 Sparks, 1986 Schindler and Stumm, 1987 Davis and Kent, 1990 Hiemstra and Van Riemsdijk, 1996 Venema et al., 1996) are summarised here. 

To a first approximation, the BLM can be considered to behave like a parallel plate capacitor immersed in a conducting electrolyte solution. In reality, even such a thin insulator as the modified BLM (designated by and R, in Fig. 108) could block the specific adsorption of some species from solution and/or modify the electrochemical behavior of the system. Similarly, System C may turn out to be a semiconductor(l)-insulator-semiconductor(2) (SIS ) rather than a semiconductor(l)-semiconductor(2) (SS ) junction. The obtained data, however, did not allow for an unambiguous distinction between these two alternative junctions we have chosen the simpler of the two [652], The equivalent circuit describing the working (Ew), the reference (Eg), and the counter (Ec) electrodes the resistance (Rm) and the capacitance (C of the BLM the resistance (R ) and capacitance (Ch) of the Helmholtz electrical double layer surrounding the BLM as well as the resistance of the electrolyte solution (RSO ) is shown in Fig. 108a [652],... 

In the absence of specific adsorption of anions, the GCSG model regards the electrical double layer as two plate capacitors in series that correspond respectively, to two regions of the electrolyte adjacent to the electrode, (a) An inner compact layer of solvent molecules (one or two layers) and immobile ions attracted by Coulombic forces (Helmholtz inner plane in Fig. 2). Specific adsorption of anions at the electrode surface may occur in this region by electronic orbital coupling with the metal, (b) An outer diffuse region of coulombically attracted ions in thermal motion that complete the countercharge of the electrode. 

As the electrode surface will, in general, be electrically charged, there will be a surplus of ionic charge with opposite sign in the electrolyte phase in a layer of a certain thickness. The distribution of jons in the electrical double layer so formed is usually described by the Gouy— Chapman—Stern theory [20], which essentially considers the electrostatic interaction between the smeared-out charge on the surface and the positive and negative ions (non-specific adsorption). An extension to this theory is necessary when ions have a more specific interaction with the electrode, i.e. when there is specific adsorption of ions. 

At the next level we also take specific adsorption of ions into account (Fig. 4.6). Specifically adsorbed ions bind tightly at a short distance. This distance characterizes the inner Helmholtz plane. In reality all models can only describe certain aspects of the electric double layer. A good model for the structure of many metallic surfaces in an aqueous medium is shown in Fig. 4.6. The metal itself is negatively charged. This can be due to an applied potential or due to the dissolution of metal cations. Often anions bind relatively strongly, and with a certain specificity, to metal surfaces. Water molecules show a distinct preferential orientation and thus a strongly reduced permittivity. They determine the inner Helmholtz plane. 

So far, only non-specific ion adsorption in the diffuse part of the electric double layer has been considered. The broad prediction is that VR should decrease in an approximately exponential fashion with increasing H and that the range of VR should be decreased by... 

---