Divider Summary

We can draw a few conclusions about using the Monte Carlo and Worst Case analyses from the results of the voltage divider circuit. 

---

In general, pilot-plant space can be divided into five basic types separate buildings, containment cells or barricades, open bays, walk-in hoods, and laboratory areas. A summary of the advantages and disadvantages of each has been given (1). 

The results of thermal building-dynamics simulation are generally referred to by zone level. They can be divided into instantaneous results and summary results. 

Instruments based on the contact principle can further be divided into two classes mechanical thermometers and electrical thermometers. Mechanical thermometers are based on the thermal expansion of a gas, a liquid, or a solid material. They are simple, robust, and do not normally require power to operate. Electrical resistance thermometers utilize the connection between the electrical resistance and the sensor temperature. Thermocouples are based on the phenomenon, where a temperature-dependent voltage is created in a circuit of two different metals. Semiconductor thermometers have a diode or transistor probe, or a more advanced integrated circuit, where the voltage of the semiconductor junctions is temperature dependent. All electrical meters are easy to incorporate with modern data acquisition systems. A summary of contact thermometer properties is shown in Table 12.3. 

The discussion of materials selection factors is naturally divided into three parts (1) overall factors pertinent to selection of the composite material itself, (2) factors governing the selection of the fibers, and (3) factors essential to selection of the matrix system. Those three types of selection trade-offs will be described, followed by summary remarks on the process of selecting a suitable composite material. 

A great variety of SAH was obtained using radical grafting of hydrophilic monomers on natural polymers without any previous modification Table 3 represents a short summary of the data on these SAH which can be divided into two groups. 

In summary, main structures involved in the action of psychostimulants can be divided into cortical (mainly prefrontal cortex) and subcortical (basal ganglia and related structures, LC and cerebellum) ones. Figure 1 gives a schematic overview of the connections between these structures, omitting the cerebellum due to lack of precise information. 

Summary. Modern views of the mechanism of nitration are divided into two schools. 

In summary, we can divide saturated rings into four groups, of which the first and... 

To start our approach we divide this chapter into parts. In the first part we outline the general chemical element content of all organisms (Sections 4.2-4.4) next, we look at the uses of non-metal elements and their in small molecule combinations (Sections 4.5 1.8) while in the third part we extend this description to their major biopolymers (Sections 4.9-4.13). Section 4.14 is a summary of these sections. In Sections 4.15 and 4.16 we examine the metal ion content of cells and combinations of these ions with organic molecules. The final sections integrate these descriptions with those of the principles of bioenergetics outlined in Chapter 3. 

Pyrolysis processes can be divided into two groups low temperature and high temperature. The products of pyrolysis processes differ and can be controlled by temperature and the rate of material heating. Table 4.1 provides a summary of variations of the product slate for biomass and coal feedstocks. 

Enger and Hartman (1972a-d) carried out extensive studies at the Shell Pipeline Corporation. The work was divided into two phases. In the first, or exploratory part, a few small-scale LNG spills were made on water ranging from 273 to 356 K no RPTs were noted. Also in the same phase, several pure liquefied gases were spilled on water. A brief summary of their results is shown in Table V. 

In summary, we show that the secretory mutants can be divided into two types, mutants expressing ectopically high levels of CSF-1 mRNA that probably secrete CSF-1 and other mutants that express low levels of CSF-1 mRNA that may not release CSF-1 but instead other factors that stimulate Myl-D7 proliferation (Heberlein et al, 2006). 

Thus, in summary, the composition can be divided into propellant, emitter and additives. The propellant is invariably gunpowder, whilst the emitter might be carbon, steel, iron, aluminium, magnesium/ aluminium alloy or even titanium. Additives are often used to promote the visual effects and to cheapen the composition. 

Coatings can be divided according to formulation, drying mechanism or other system of categorizing. Table 18.8 contains a summary of coatings according to drying mechanism. 

Adhesives can be divided according to the type of delivery of the adhesive or by type of polymer employed in the adhesive. Following are short summaries of adhesives divided according to these two factors ... 

Summary of Landmine Flux Results Since no one has devised a method of directly measuring the flux of explosive molecules from a mine, whether in situ or in the laboratory, several laboratory measurements have been reported in which the mine was placed in a sealed container, surrounded by soil, water, or air. The concentrations of explosive molecules in the surrounding media were then measured at intervals of several days and the flux inferred from the total concentration divided by the elapsed time. This likely provides the best estimate that can be expected. The various measurements have substantial variation, depending on the techniques and media used. Phelan and Webb describe several experiments [1, pp. 23, 24], It appears that a reasonable expectation of flux of explosive compounds from a buried landmine that move into the surrounding soil will be in the range of 1 to 200 pg/day. There are some complications, of course, since the surrounding soil produces a level of resistance, or back pressure, to the flux of the molecules. While the mechanisms are complex, the net effect is that wet soil permits a lower diffusive flux than dry... 

In this chapter the first of the two most important categories of oxidations catalysed by Ru complexes (the other being alkene and alkyne oxidations in Chapter 3) are considered. The approach in this and subsequent chapters differs from that of Chapter 1, concentrating here on the substrate rather than on the oxidant. The text is divided into the categories of alcohols and their oxidations. There are summaries in section 2.3.6 of systems of limited apphcability which are mentioned only in Chapter 1, and in section 2.3.7 of large-scale (>1 g) oxidations. 

The sample histogram in Figure 2.1 provides a visual summary of the distribution of total cholesterol in a group of 100 patients at baseline (artificial data). The x-axis is divided up into intervals of width 0.5 mmol/1 and the y-axis counts the number of individuals with values within those intervals. 

Catalysts. - The catalysts that have been studied for ATR of liquid fuels can be divided into base and noble metal materials. The following summary will show that neither type of catalyst has been optimized for ATR of liquid fuels. The studies reported to date have largely been carried out using Ni-based methane-SR catalysts, simple (or proprietary) noble metal formulations. Much remains to be learned about catalysts for this reaction. 

---