Dioxan effect

Another photocyclization to a benzo[c]phenanthridine was reported (127). Oppenauer oxidation of ( )-ophiocarpine (92) with potassium fm-butoxide and benzophenone in dioxane effected C-6—N bond cleavage to afford the hydroxyisoquinoline 219 via berberinephenolbetaine (121) (Scheme 39). Although photolysis of 219 gave only the oxepine 221, that of its methyl ether 220 furnished directly norchelerythrine (222) through electrocyclization followed by spontaneous elimination of methanol. 

Woo, Y.T., Argus, M.F. Arcos, J.C. (1977b) Metabolism in vivo of dioxane effect of inducers and inhibitors of hepatic mixed-function oxidases. Biochem. Pharmacol., 25, 1539-1542 Woo, Y.T., Argus, M.F. Arcos, J.C. (1978) Effect of mixed-function oxidase modifiers on... 

An obvious difficulty arises with this rather elaborate rationale when phosphoramidate and aryl phosphoramidate monoanions are compared for example, the dissimilarity of the dioxan effect yet the identity of product distribution observed in methanol-water competition experiments. Preliminary studies in the author s laboratory have revealed striking differences in the hydrolytic behavior between a series of phosphoramidafes derived from primary aliphatic amines and the above aryl systems. No linear structure-reactivity relationship between the logarithmic rate of hydrolysis of the monoanion species and the pKa of the amine is observed19. Moreover, the rate of hydrolysis of phosphoramidate monoanions derived from aliphatic amines is at least 104 times slower than those formed from aryl amines. In contrast, only a thirtyfold decrease in rate is observed for the corresponding ApKa in the O-phos-phate monoester series. The suspicion that mechanism (1), even with the above proposed modification, is not an accurate description of phosphoramidate monoanion hydrolysis derives some further support from the observation that the monoanion is subject to nucleophilic attack by substituted pyridines al-... 

The second major metabolite from T. inflation is structurally closely related to cyclosporin A, as can be deduced by elemental analysis, mass spectrum (m/z 1217), IR and NMR spectra. Furthermore, the presence of the double bond and OH group of the unusual MeBmt was established. Sulphonic acids in methanol or dioxane effected the typical rearrangement reaction by N, O-acyl migration to the iso-compound (13). Hydrolysis furnished the same amino acids as cyclosporin A with the exception of L-a-aminobutyric acid, which is replaced in cyclosporin C (12) by L-threonine. The amino-acid sequence could be deduced by conversion of cyclosporin C into cyclosporin A via the corresponding tosylate (14) and iodo derivatives (15) [7]. Position 2 for L-threonine as well as the assumed twisted -pleated sheet conformation of the molecule were confirmed by 13C-NMR spectra. 

Nitropyrazole is insoluble in a low-polar medium at concentrations sufficient for measuring the dipole moment. In solving dioxane, 3(5)-nitropyrazole forms a hydrogen bond with dioxane (H-complex), it is the so-called dioxane effect (Scheme 3.48). 

In the second theory the formation of intermolecular complexes is not assumed and the variation of the dipole moment with concentration is considered to be caused by the limited orientation of the dipole molecules in the external field, due to the field of the surrounding polar molecules. The dioxan effect — For the measurement of dipole moments in solution... 

HCIO4 in 50% aqueous dioxane 0-20% HCl in 60% aqueous dioxane 0-50% H2SO4 in 60% aqueous dioxane 0-.50% HCIO4 in 60% aqueous dioxane Effects of H2O on HCIO4 in dioxane Kreevoy, 1956 Torek et al., 1962 Torek et al., 1962 Bunton et al., 1957 Ervasti and Koskikallio, 1962... 

Recent investigation of the effect of substituents in the para position of the phenylalanine ligand on the stability of the ternary complexes has revealed the secpience Br > OH > Q NH2 > H > F". Interestingly, analysis of CD spectra indicates a reduction of the arene-arene interaction" upon addition of 1,4-dioxane to aqueous solutions of the mixed-ligand complexes, in disagreement with previous observations by Sigel" . 

Lithium hydride is perhaps the most usehil of the other metal hydrides. The principal limitation is poor solubiUty, which essentially limits reaction media to such solvents as dioxane and dibutyl ether. Sodium hydride, which is too insoluble to function efficiently in solvents, is an effective reducing agent for the production of silane when dissolved in a LiCl—KCl eutectic at 348°C (63—65). Magnesium hydride has also been shown to be effective in the reduction of chloro- and fluorosilanes in solvent systems (66) and eutectic melts (67). 

The addition product, C QHgNa, called naphthalenesodium or sodium naphthalene complex, may be regarded as a resonance hybrid. The ether is more than just a solvent that promotes the reaction. StabiUty of the complex depends on the presence of the ether, and sodium can be Hberated by evaporating the ether or by dilution using an indifferent solvent, such as ethyl ether. A number of ether-type solvents are effective in complex preparation, such as methyl ethyl ether, ethylene glycol dimethyl ether, dioxane, and THF. Trimethyl amine also promotes complex formation. This reaction proceeds with all alkah metals. Other aromatic compounds, eg, diphenyl, anthracene, and phenanthrene, also form sodium complexes (16,20). 

Hydrolysis of TEOS in various solvents is such that for a particular system increases directiy with the concentration of H" or H O" in acidic media and with the concentration of OH in basic media. The dominant factor in controlling the hydrolysis rate is pH (21). However, the nature of the acid plays an important role, so that a small addition of HCl induces a 1500-fold increase in whereas acetic acid has Httie effect. Hydrolysis is also temperature-dependent. The reaction rate increases 10-fold when the temperature is varied from 20 to 45°C. Nmr experiments show that varies in different solvents as foUows acetonitrile > methanol > dimethylformamide > dioxane > formamide, where the k in acetonitrile is about 20 times larger than the k in formamide. The nature of the alkoxy groups on the siHcon atom also influences the rate constant. The longer and the bulkier the alkoxide group, the lower the (3). 

Studies of reaction mechanisms ia O-enriched water show the foUowiag cleavage of dialkyl sulfates is primarily at the C—O bond under alkaline and acid conditions, and monoalkyl sulfates cleave at the C—O bond under alkaline conditions and at the S—O bond under acid conditions (45,54). An optically active half ester (j -butyl sulfate [3004-76-0]) hydroly2es at 100°C with iaversion under alkaline conditions and with retention plus some racemization under acid conditions (55). Effects of solvent and substituted stmcture have been studied, with moist dioxane giving marked rate enhancement (44,56,57). Hydrolysis of monophenyl sulfate [4074-56-0] has been similarly examined (58). 

Methylene chloride is one of the more stable of the chlorinated hydrocarbon solvents. Its initial thermal degradation temperature is 120°C in dry air (1). This temperature decreases as the moisture content increases. The reaction produces mainly HCl with trace amounts of phosgene. Decomposition under these conditions can be inhibited by the addition of small quantities (0.0001—1.0%) of phenoHc compounds, eg, phenol, hydroquinone, -cresol, resorcinol, thymol, and 1-naphthol (2). Stabilization may also be effected by the addition of small amounts of amines (3) or a mixture of nitromethane and 1,4-dioxane. The latter diminishes attack on aluminum and inhibits kon-catalyzed reactions of methylene chloride (4). The addition of small amounts of epoxides can also inhibit aluminum reactions catalyzed by iron (5). On prolonged contact with water, methylene chloride hydrolyzes very slowly, forming HCl as the primary product. On prolonged heating with water in a sealed vessel at 140—170°C, methylene chloride yields formaldehyde and hydrochloric acid as shown by the following equation (6). 

When two heteroatoms are present in a saturated six-membered ring their effects are approximately additive. Apart from the case of two a oxygen atoms—in 1,3-dioxane (48) the shift of C-2 is S 95.4 instead of 5 108 which a double shift of 40 p.p.m. would require—predictions of shift made on this basis are usually accurate to within 5 p.p.m. and are generally much closer than this. Observed shifts for a few representative examples are shown in structures (48)-(52). 

The protonation equilibria for nine hydroxamic acids in solutions have been studied pH-potentiometrically via a modified Irving and Rossotti technique. The dissociation constants (p/fa values) of hydroxamic acids and the thermodynamic functions (AG°, AH°, AS°, and 5) for the successive and overall protonation processes of hydroxamic acids have been derived at different temperatures in water and in three different mixtures of water and dioxane (the mole fractions of dioxane were 0.083, 0.174, and 0.33). Titrations were also carried out in water ionic strengths of (0.15, 0.20, and 0.25) mol dm NaNOg, and the resulting dissociation constants are reported. A detailed thermodynamic analysis of the effects of organic solvent (dioxane), temperature, and ionic strength on the protonation processes of hydroxamic acids is presented and discussed to determine the factors which control these processes. 

Monoprotection of a symmetrical diol can be effected by reaction with a polymer-supported phenylacetyl chloride. The free hydroxyl group is then converted to an ether and the phenylacetate cleaved by aqueous ammonia-dioxane, 48 h. ... 

AcCl, NaOH, dioxane, Bu4N HSO, 25°, 30 min, 90% yield. Phase-transfer catalysis with tetra-n-butylammionium hydrogen sulfate effects acylation of sterically hindered phenols and selective acylation of a phenol in the presence of an aliphatic secondary alcohol. 

Monoesterification of a symmetrical dihydroxy aromatic compound can be effected by reaction with polymer-bound benzoyl chloride (Pyr, benzene, reflux, 15 h) to give a polymer-bound benzoate, which can be alkylated with diazomethane to form, after basic hydrolysis (0.5 M NaOH, dioxane, H2O, 25°, 20 h, or 60°, 3 h), a monomethyl ether. ... 

The Tcrom ester is prepared from the cesium salt of an N-protected amino acid by reaction with 2-(trifluoromethyl)-6-chromylmethyl bromide (DMF, 25°, 4 h, 53-89% yield). Cleavage of the Tcrom group is effected by brief treatment with n-propylamine (2 min, 25°, 96% yield). It is stable to HCl/dioxane, used to cleave a BOC group. ... 

BOC-OCH(Cl)CCl3 (1,2,2,2-tetrachloroethyl / r/-butyl carbonate, BOC-OTCE), THF, K2CO3 or dioxane, H2O, Et3N, 60-91% yield. This reagent is a cheap, distillable solid that has the effectiveness of (BOC)20. 

Compounds in which conformational, rather than configurational, equilibria are influenced by the anomeric effect are depicted in entries 4—6. Single-crystal X-ray dilfiaction studies have unambiguously established that all the chlorine atoms of trans, cis, ira j-2,3,5,6-tetrachloro-l,4-dioxane occupy axial sites in the crystal. Each chlorine in die molecule is bonded to an anomeric carbon and is subject to the anomeric effect. Equally striking is the observation that all the substituents of the tri-0-acetyl-/ -D-xylopyranosyl chloride shown in entry 5 are in the axial orientation in solution. Here, no special crystal packing forces can be invoked to rationalize the preferred conformation. The anomeric effect of a single chlorine is sufficient to drive the equilibrium in favor of the conformation that puts the three acetoxy groups in axial positions. 

Aromatic steroids are virtually insoluble in liquid ammonia and a cosolvent must be added to solubilize them or reduction will not occur. Ether, ethylene glycol dimethyl ether, dioxane and tetrahydrofuran have been used and, of these, tetrahydrofuran is the preferred solvent. Although dioxane is often a better solvent for steroids at room temperature, it freezes at 12° and its solvent effectiveness in ammonia is diminished. Tetrahydrofuran is infinitely miscible with liquid ammonia, but the addition of lithium to a 1 1 mixture causes the separation of two liquid phases, one blue and one colorless, together with the separation of a lithium-ammonia bronze phase. Thus tetrahydrofuran and lithium depress the solubilities of each other in ammonia. A tetrahydrofuran-ammonia mixture containing much over 50 % of tetrahydrofuran does not become blue when lithium is added. In general, a 1 1 ratio of ammonia to organic solvents represents a reasonable compromise between maximum solubility of steroid and dissolution of the metal with ionization. 

Complete exchange of protons in a sterically unhindered position a to a carbonyl group can be achieved by heating a solution of the ketone in O-deuterated solvents in the presence of an acid or base catalyst, the latter being the more effective. The most commonly used solvents are methanol-OD, ethanol-OD, and the aprotic solvent anhydrous tetrahydrofuran or dioxane mixed with deuterium oxide. Under alkaline conditions the exchange rate in 153 2 14,164 stcroids, for example, is usually... 

The isotopic purity of the products from a lithium aluminum deuteride reduction is usually equivalent to that of the reagent. The presence of moisture has little effect on the isotope composition of the products, causing only the decomposition of some of the reagent. For the best results, however, it is advisable to distill the solvent— usually ether, tetrahydrofuran or dioxane depending on the desired reaction temperature—from lithium aluminum hydride directly into the reaction flask. In this manner the reduction of 3-keto-5a-steroids (60), for example, gives the corresponding 3a-di alcohols (61) in 98% isotopic purity. ... 

The conditions that have been employed for these reactions vary considerably. Thus, temperatures from 0° to boiling ethanol and reaction times from 10 minutes to 24 hours have been reported. Methanol and ethanol are the most common solvents employed, but aqueous /-butyl alcohol and aqueous dioxane have also been used. The presence of acetonitrile in the reaction solvent has been claimed to effect a faster and a more stereoselective... 

The acetoxy dienone (218) gives phenol (220). Here, an alternative primary photoreaction competes effectively with the dienone 1,5-bonding expulsion of the lOjS-acetoxy substituent and hydrogen uptake from the solvent (dioxane). In the case of the hydroxy analog (219) the two paths are balanced and products from both processes, phenol (220) and diketone (222), are isolated. In the formation of the spiro compound (222) rupture of the 1,10-bond in the dipolar intermediate (221) predominates over the normal electron transmission in aprotic solvents from the enolate moiety via the three-membered ring to the electron-deficient carbon. While in protic solvents and in 10-methyl compounds this process is inhibited by the protonation of the enolate system in the dipolar intermediate [cf. (202), (203)], proton elimination from the tertiary hydroxy group in (221) could reverse the efficiencies of the two oxygens as electron sources. 

Although fluorocarbons are considered very stable compounds, they can be defluonnated to unsaturated denvatives under certain mild conditions. Hexa-decafluorobicyclo[4.4.0]dec-I(6)-ene reacts with activated zinc powder at 80-100 °C to yield partially and fully aromatized products [61] The final product composition depends on the solvent. Dioxane, acetonitrile, and dimethylform-amide, m this order, effect increasing unsaturation (equation 30). 

---