Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Dimethyl carbamic acid chloride

Hydroxypyridine Dimethyl carbamic acid chloride Methyl bromide... [Pg.1333]

Coupling of a benzoic acid derivative under basic conditions is achieved with alkyl iodides," alkyl chlorides,dimethyl sulfate, or (l,1-dihydroperfluoroalkyl)phenyliodonium triflates. Common bases used arc potassium carbonate or sodium hydroxide (with phase-transfer catalyst). " Again, employing acid chlorides " - or anhydrides, " is the method of choice. The reaction can be performed without further activation, " " but in most cases the transformation takes place in the presence of the usual bases, triethylamine - " or pyridine " " " " " [in some cases 4-(dimethylamino)pyridine is added " ]. In a similar manner carbamates. thiocarbamates, " or thiocarbonates are synthesized. Perfluoropropcn-2-ol... [Pg.584]

Cyclopropanols can be converted to various cyclopropyloxy derivatives (esters, e.g. acetates, ethers, e.g. methyl and ethyl ethers, and acetals, e.g. tetrahydropyran-2-yloxy derivatives) under the appropriate reaction conditions. In most cases the synthesis of cyclopropyl esters by the reaction between a cyclopropanol and an acid chloride (e.g. formation of 1 ) or acetic anhydride (e.g. formation of 2 ) have been reported. The yields were particularly good (84-95%) when acetic anhydride was used, although a drawback of the reaction can be byproduct formation. When a reactive moiety is attached to the cyclopropane ring in addition to the hydroxy group, other reactions can also occur m-l-(aminomethyl)-2,2-dimethyl-3-(2-methylprop-l-enyl)cyclopropanol (3) reacted with phosgene in benzene to give the corresponding carbamate l,l-dimethyl-2-(2-methylprop-l-enyl)-4-oxa-6-azaspiro[2.4]heptan-5-one (4) in 31% yield. ... [Pg.1707]

Carbamic acid, (aminoiminomethyl)methyl-, dimethyl deriv., ethyl ester, monohydrochloride EiNECS 265-620-8 Ethyl (dimethylamidino)methyicarbamate, hydro-chloride Ethyl amidinomethylcarbamate monohydro-chloride, dimethyi derivative. [Pg.269]

See Zinc dibutyidithiocarbamate Carbamic acid, dimethyl-. See Dimethylcarbamyl chloride Carbamic acid, dimethyidithio-, anhydrosulfide. See Tetramethylthiuram monosulfide Carbamic acid, dimethyidithio-, iron salt. See Ferbam... [Pg.751]

Dimethylcarbamic acid chloride. See Dimethylcarbamyl chloride Dimethylcarbamic acid, 2-(dimethylamino)-5,6-dimethyl-4-pyrimidinyl ester. See Pirimicarb Dimethyl carbamic chloride Dimethyl carbamidoyl chloride. See Dimethylcarbamyl chloride... [Pg.1409]

Carbamoyl chloride, dimethyl- Carbamyl chloride, N,N-dimethyl- Chloroformic acid dimethylamide DDC (Dimethylamino) carbonyl chloride Dimethylcarbamic acid chloride Dimethyl carbamic chloride Dimethyl carbamidoyl chloride Dimethyl carbamoyl chloride N,N-Dimethylcarbamoyl chloride N,N-Dimethylcarbamyl chloride DMCC Empirical CsHsCINO... [Pg.1409]

Crich and Rumthao reported a new synthesis of carbazomycin B using a benzeneselenol-catalyzed, stannane-mediated addition of an aryl radical to the functionalized iodocarbamate 835, followed by cyclization and dehydrogenative aromatization (622). The iodocarbamate 835 required for the key radical reaction was obtained from the nitrophenol 784 (609) (see Scheme 5.85). lodination of 784, followed by acetylation, afforded 3,4-dimethyl-6-iodo-2-methoxy-5-nitrophenyl acetate 834. Reduction of 834 with iron and ferric chloride in acetic acid, followed by reaction with methyl chloroformate, led to the iodocarbamate 835. Reaction of 835 and diphenyl diselenide in refluxing benzene with tributyltin hydride and azobisisobutyronitrile (AIBN) gave the adduct 836 in 40% yield, along with 8% of the recovered substrate and 12% of the deiodinated carbamate 837. Treatment of 836 with phenylselenenyl bromide in dichloromethane afforded the phenylselenenyltetrahydrocarbazole 838. Oxidative... [Pg.254]

Since BAs occurring in food do not exhibit satisfactory absorbance or fluorescence in the visible or ultraviolet range, chemical derivatization, either pre- (35-37) or postcolumn (38), is usually used for their detection in HPLC. The most frequently employed reagents for precolumn derivatization are fluorescamine, aminoquinolyl-lV-hydroxysuccinimidyl carbamate (AQC) (39, 40), 9-fluorenylmethyl chloroformate (FMOC) (41-43), 4-dimethylaminoazobenzene-4 -sul-fonyl chloride (dabsylchloride, DBS) (44), N-acetylcysteine (NAC) (45,46), and 5-dimethyl-amino-1-naphthalene-1-sulfonyl chloride (dansylchloride, DNS) (47,48), phthalaldehyde (PA), and orf/to-phthaldialdehyde (OPA) (49-51), together with thiols such as 3-mercaptopropionic acid (MPA) (37) and 2-mercaptoethanol (ME) (35,49). [Pg.883]

Etherification of isohexides with substituted-benzyl chloride in aqueous sodium hydroxide, or by means of sodium hydride in dimethyl sulfoxide, yields mixtures of mono- and bis-ethers, which can be conventionally separated by distillation or by column chromatography.176 The preparation of some phenyl ethers was also described, using the tosylate-phenoxide exchange reaction. Monoethers (88) synthesized in this way were transformed into carbamates (89) by reaction with sodium cyanide-trifluoroacetic acid (see Scheme 18). [Pg.139]

Two German patents by Muller describe preparative methods which avoid the use of hydrazoic acid by heating sodium azide with ammonium chloride or sulfate in aqueous solution. A recent Japanese patent describes a reaction between sodium azide and ammonium carbamate in liquid ammonia to give ammonium azide. Evans, Yoffe, and Gray have suggested the reaction of sodium azide with ammonium chloride in iV,iV-dimethylformamide. A modification of the last method has been made it involves the reaction of sodium azide and ammonium sulfate in dimethyl-formamide to give anhydrous ammonium azide of high purity. [Pg.53]

To conclude this section, it is important to note that alkenes are not the only hydrocarbon dienophiles that are useful partners in the Diels-Alder reaction. Alkynes and even benzyne are quite useful. As a structure proof of an intermediate in Pandey s synthesis of epiboxidine, the methyl carbamate of pyrrole (34) reacted with dimethyl-2-butynoate (35),in the presence of aluminum chloride (see sec. 11.6.A for a discussion of Lewis acid catalysis) to give a 90% yield of azanorbomadiene (36). A benzyne derivative of pyridine was... [Pg.933]

Note Some selected examples are included (the year indicated refers to the first report). DMA AlA-dimethylacetamide DMAD dimethyl acetylenedicarbox-ylate DAST iV,iV-diethylaminosulfur trifluoride DMTMM 4-(4,6-dimethoxy[l,3,5]triazin-2-yl)-4-methylmOTpholinium chloride 4-DMAP 4-dimethylami-nopyridine Burgess reagent methyl Al-(triethylammoniosulphonyl)carbamate TDI tolylene 2,4-diisocyanale DCE 1,2-dichloroethane PPA/S102 siUca gel-supported polyphosphoric acid. [Pg.207]


See other pages where Dimethyl carbamic acid chloride is mentioned: [Pg.1333]    [Pg.2920]    [Pg.2920]    [Pg.1333]    [Pg.1333]    [Pg.2920]    [Pg.2920]    [Pg.1333]    [Pg.1333]    [Pg.786]    [Pg.531]    [Pg.584]    [Pg.584]    [Pg.435]    [Pg.134]    [Pg.300]    [Pg.2280]    [Pg.173]    [Pg.98]    [Pg.18]    [Pg.116]    [Pg.89]    [Pg.2280]    [Pg.169]    [Pg.168]    [Pg.371]    [Pg.134]    [Pg.870]    [Pg.128]    [Pg.116]   


SEARCH



2.5- dimethyl- -chloride

Carbamic acid

Dimethyl carbamate

© 2024 chempedia.info