Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

1.3- Diimines reactions

FIGURE 22.33 Reaction between phenylhydrazine and the ketone form of the substituted enol leads to a phenylhydrazone different from the one formed in the reaction of Figure 22.32. Aniline is now eliminated to give a diimine. Reaction with a third equivalent of phenylhydrazine leads to the osazone. [Pg.1146]

Reaction scheme No. 3 applied on a higher unsaturated system 4 affords at first isopyrazoles 5 which allow an access to cis-chrysanthemic esters after reduction of the intermediate cyclopropene-system using a nickel boride-catalyst or diimine. (Reaction scheme 4) [19]. [Pg.5]

Oxidation H ir Colorant. Color-forming reactions are accompHshed by primary intermediates, secondary intermediates, and oxidants. Primary intermediates include the so-called para dyes, -phenylenediamine, -toluenediamine, -aminodiphenylamine, and p- am in oph en o1, which form a quinone monoimine or diimine upon oxidation. The secondary intermediates, also known as couplers or modifiers, couple with the quinone imines to produce dyes. Secondary intermediates include y -diamines, y -aminophenols, polyhydroxyphenols, and naphthols. Some of the more important oxidation dye colors are given in Figure 1. An extensive listing is available (24,28). [Pg.456]

The mechanism of oxidative dyeing involves a complex system of consecutive, competing, and autocatalytic reactions in which the final color depends on the efficiency with which the various couplers compete with one another for the available diimine. In addition, hydrolysis, oxidation, or polymerization of diimine may take place. Therefore, the color of a mixture caimot readily be predicted and involves trial and error. Though oxidation dyes produce fast colors, some off-shade fading does occur, particularly the development of a red tinge by the slow transformation of the blue indamine dye to a red phenazine dye. [Pg.457]

Is the second step of the overall reaction for R=Me (N-methylphthalimide + hydrazine —> phthalimide hydrazide + methylamine) exothermic or endothermic Will higher temperatures accelerate or inhibit the reaction Is the structure drawn above for phthalimide hydrazide its lowest-energy form or are either the imine or diimine tautomers preferred Compare energies for the hydrazide and imine and diimine tautomers. Examine the geometry of phthalimide hydrazide and any low energy tautomer, and draw the Lewis structure(s) that best describes it. Can your Lewis structures account for the energy differences Examine electrostatic potential maps for all three molecules. Which molecule(s) are stablized by favorable electrostatic interactions Which are destabilized Can this help explain the energy differences Elaborate. [Pg.206]

An interesting extrapolation of this synthesis deals with the preparation of the bispyridinium salt 62 from 1,2-phthalic dicarboxaldehyde and its subsequent reaction with primary amines (92BSB509).Tlie expected diimines 63 readily cyclize so that 2-aryl-l-arylimino-2,3-dihydro-l//-isoindoles 64 can be isolated in excellent yields (90-95%). Contrary to the reactions performed by employing the dialdehyde and amines directly, the syntheses involving the azinium salts do not produce those typical dark-colored complex mixtures of products (77JOC4217 85JHC449) (Scheme 20). [Pg.205]

Tile chloro derivative 33a (not isolated) interacts with pyridine-2,3-diamine in dichloromethane at room temperature to yield 73 (85%) (93BSB357). A further example deals with the reaction between the salt 39 and benzene-1,2-diamine, which gives an imine 74 (80%) under special experimental conditions (93BSB357). In order for the reaction to work, the salt 39 must be isolated prior to its employment (Section IV,C,8). No traces of the diimines were detected for both cases. However, the experimental conditions were not optimized for this purpose since no more than three equivalents of the diamines were used (Scheme 23). [Pg.208]

Singlet phenylnitrene, and hence /V,A -diethyl-3//-azcpin-2-amines, e. g. 102, can be generated by the thermolysis of A,-phenyl-Af,<9-bis(trimcthylsi]yl)hydroxylamine (100) in the presence of dialkylamines the reaction fails, however, with arylamines.210 Photofragmentation of the spiro oxaziridine 101 in diethylamine solution also produces the 3//-azepine 102,2,1 and an oxaziridine intermediate is probably involved in the formation, in low yield (1 %), of azepine 102 by the photolysis of A/,A( -diarylbenzoquinonc diimine A/,A/ -dioxides in benzene/die-thylamine solution.212... [Pg.158]

The products from cyclization reactions of 5-substituted isoindolinediimirtes are 2,9,16,23-tetrasubstituted phthalocyanines, e.g. 2.110121,4lf Again, a mixture of four structural isomers is obtained (see p 737). It should be emphasized that reaction conditions employing isoindoline-diimines are mild in comparison to the use of phthalonitriles. [Pg.776]

Peroxides oxidize N,N-DPDD to Wurster s red, a semiquinone diimine derivative [4]. Similarly Wurster s red is also produced from N,N-DPDD by reaction with halogen-containing substances in the presence of sodium ethylate and UV light and by reaction with the chlorinated triazines produced by reaction with chlorine [7]. [Pg.122]

Peroxides oxidize TPDD to Wurster s blue, a product with a semiquinone diimine structure [1]. Similarly Wurster s blue is also produced from TPDD by reaction with halogen-containing substances produced by the reaction of aromatic amines and triazines with chlorine gas. [Pg.216]

Several studies characterizing the reactions of alkenyl radicals with quinone dumines and quino-neimines were published in the late 1970s. Quinone dumines react with allylic radicals yielding both the reduced PPD and the alkylated product. In these experiments 2-methyl-2-pentene served as a model olefin (model for NR). Samples of the olefin and quinoneimines or quinone diimine were heated to 140°C. Isolation and analysis of products demonstrated that 40%-70% of the imine or diimine was reduced to the corresponding PPD, while 20%-50% was isolated as the alkylated product. This alkylation reaction (via an allylic radical) represents the pathway to the formation of rubber-bound antidegradant. ... [Pg.489]

The results of the modeling smdy of the chain transfer chemistry have been published elsewhere. Quinone diimines are predicted to be more than two orders of magnimde more reactive toward free radicals than the corresponding PPD. The reactivity of a radical with another molecule should be related to the Lowest Unoccupied Molecular Orbital (LUMO) energy of that molecule. The reaction of a radical with a PPD differs from the reaction of a radical with QDI. [Pg.489]

PPDs donate hydrogen atoms while QDI reacts generally by addition to the radical. Examining the LUMO orbitals of PPD and QDI rationalizes one source of the large difference in reactivity. The reaction site of the PPD will be the LUMO of the H atom attached to the N atoms. While for QDI the delocalized LUMO in the conjugated diimine ring is the reaction site. These are shown in Figure 16.1. [Pg.490]

C-H insertion also occurs in the reactions with acetone and acetophenone, presumably through the rearrangement of transient OH-substituted phosphi-ranes [87]. C-C insertions occur for diketones to give 45 and have been postulated to occur via initial 1,2-addition to the conjugated enol 44 [87]. Diimines 46 also undergo C-C insertions [88]. Based on a theoretical evaluation, the products 47 are considered to result from a 2,3-sigmatropic rearrangement of initial formed P,N-ylids. [Pg.109]

Diketimines can be prepared by condensation of 1,2-diketones with 2 equiv of an amine, or 1 equiv of a 1,2-diamine, by azeotropic removal of water. Either a chiral diketone or a chiral amine/diamine can be used in order to obtain a chiral diimine. In both cases, the use of 1,2-diamines is expected to provide better stereocontrol, because of the rigidity of the derived cyclic diimines. For example, the reaction of camphor 1,2-diketone 275 and racemic 1,2-diphenylethylenediamine (d,l)-26 gave the diimine 276 as a mixture of two diastereomers (Scheme 45) [138]. Reduction of 276 with sodium borohydride followed by hydrogenolysis of the N substituents afforded the camphordiamine, which was isolated as the dihydrochloride... [Pg.52]

Scott et al. [45] prepared diimine derivatives of 2,2 -diamino-6,6 -dimethyl-biphenyl (as structure 37 in Scheme 19) as copper chelates for the catalyzed cyclopropanation reaction. All catalysts were active in this reaction but enan-tioselectivities varied importantly according to the substitution pattern of the imine aryl group only ortho-substituted ligands (by chloride or methyl groups) led to products with measurable enantioselectivity for the model test reaction (up to 57% ee with 37). [Pg.108]

Starting from the benzylidene diimine 24 (Scheme 15) and only one equivalent of TosMlC, the same reaction afforded the imidazole-imine derivative and then, after alkylation, the corresponding salt 25. After hydrolysis, an... [Pg.201]

An NMR and structural study characterized the intermediates generated from diimine catalysts on reaction with diazodiphenylmethane.193 The dominant species in solution is dinuclear, but a monomeric metallocarbene species can be detected. [Pg.921]


See other pages where 1.3- Diimines reactions is mentioned: [Pg.491]    [Pg.254]    [Pg.195]    [Pg.403]    [Pg.722]    [Pg.206]    [Pg.149]    [Pg.589]    [Pg.480]    [Pg.487]    [Pg.487]    [Pg.489]    [Pg.305]    [Pg.11]    [Pg.44]    [Pg.44]    [Pg.45]    [Pg.46]    [Pg.47]    [Pg.48]    [Pg.53]    [Pg.279]    [Pg.285]    [Pg.853]    [Pg.853]    [Pg.7]    [Pg.7]   
See also in sourсe #XX -- [ Pg.422 ]

See also in sourсe #XX -- [ Pg.422 ]




SEARCH



1.2- Diimines, reaction with

Cobalt diimine complexes, reaction with

Coordinated diimine ligands, oxidation reaction products

Diimine

Diimines

Diimines reaction mechanism

Iron diimine complexes substitution reactions

Quinone diimines reaction with radicals

Quinone diimines, reaction with

© 2024 chempedia.info