Diethyl complex with

The products are Hquids, soluble in various solvents and stable over prolonged periods. Monochloroborane is an equiUbtium mixture containing small amounts of borane and dichloroborane complexes with dimethyl sulfide (81). Monobromoborane—dimethyl sulfide complex shows high purity (82,83). Solutions of monochloroborane in tetrahydrofuran and diethyl ether can also be prepared. Strong complexation renders hydroboration with monochloroborane in tetrahydrofuran sluggish and inconvenient. Monochloroborane solutions in less complexing diethyl ether, an equiUbtium with small amounts of borane and dichloroborane, show excellent reactivity (88,89). Monochloroborane—diethyl etherate [36594-41-9] (10) may be represented as H2BCI O... 

Although dichloroborane reacts direcdy with alkenes in the gas phase (118), its complexes with diethyl ether and dimethyl sulfide are so strong that direct hydroboration does not proceed (119,120). The addition of a decomplexing agent, eg, boron trichloride, is necessary for hydroboration. 

Mixtures of a titanium complex of saturated diols, such as TYZOR OGT, and a titanium acylate, such as bis- -butyl-bis-caproic acid titanate, do not have a yellowing or discoloring effect on white inks used to print polyolefin surfaces (506). The complexes formed by the reaction of one or two moles of diethyl citrate with TYZOR TPT have an insignificant color on their own and do not generate color with phenol-based antioxidants (507). The complexes formed by the addition of a mixture of mono- and dialkyl phosphate esters to TYZOR TBT are also low color-generating, adhesion-promoting additives for use in printing polyolefin films (508). 

Calmagite [3147-14-6J M 358.4, m 300°, pK, 8.1, pKj 12.4. Crude sample was extracted with anhydrous diethyl ether [Lindstrom and Diehl Anal Chem 32 1123 I 960]. Complexes with Ca, Mg and Th. 

An achiral reagent cannot distinguish between these two faces. In a complex with a chiral reagent, however, the two (phantom ligand) electron pairs are in different (enantiotopic) environments. The two complexes are therefore diastereomeric and are formed and react at different rates. Two reaction systems that have been used successfully for enantioselective formation of sulfoxides are illustrated below. In the first example, the Ti(0-i-Pr)4-f-BuOOH-diethyl tartrate reagent is chiral by virtue of the presence of the chiral tartrate ester in the reactive complex. With simple aryl methyl sulfides, up to 90% enantiomeric purity of the product is obtained. 

Enantioselectivities were found to change sharply depending upon the reaction conditions including catalyst structure, reaction temperature, solvent, and additives. Some representative examples of such selectivity dependence are listed in Scheme 7.42. The thiol adduct was formed with 79% ee (81% yield) when the reaction was catalyzed by the J ,J -DBFOX/Ph aqua nickel(II) complex at room temperature in dichloromethane. Reactions using either the anhydrous complex or the aqua complex with MS 4 A gave a racemic adduct, however, indicating that the aqua complex should be more favored than the anhydrous complex in thiol conjugate additions. Slow addition of thiophenol to the dichloromethane solution of 3-crotonoyl-2-oxazolidinone was ineffective for enantioselectivity. Enantioselectivity was dramatically lowered and reversed to -17% ee in the reaction at -78 °C. A similar tendency was observed in the reactions in diethyl ether and THF. For example, a satisfactory enantioselectivity (80% ee) was observed in the reaction in THF at room temperature, while the selectivity almost disappeared (7% ee) at 0°C. 

Matsui and Mochida24) have determined the thermodynamic stabilities (log 1 /Kd) for a- and P-cyclodextrin complexes with a variety of alcohols (Table 2) and analyzed the results in connection with the physicochemical properties of the guest molecules by the multivariate technique. The log 1/Kd values were plotted against log Pe, where Pe is the partition coefficient of alcohol in a diethyl ether-water system. The plots for the a- and P-cyclodextrin complexes with eight 1-alkanols gave approximately straight lines with slopes of around one. 

The cobalt complex is usually formed in a hot acetate-acetic acid medium. After the formation of the cobalt colour, hydrochloric acid or nitric acid is added to decompose the complexes of most of the other heavy metals present. Iron, copper, cerium(IV), chromium(III and VI), nickel, vanadyl vanadium, and copper interfere when present in appreciable quantities. Excess of the reagent minimises the interference of iron(II) iron(III) can be removed by diethyl ether extraction from a hydrochloric acid solution. Most of the interferences can be eliminated by treatment with potassium bromate, followed by the addition of an alkali fluoride. Cobalt may also be isolated by dithizone extraction from a basic medium after copper has been removed (if necessary) from acidic solution. An alumina column may also be used to adsorb the cobalt nitroso-R-chelate anion in the presence of perchloric acid, the other elements are eluted with warm 1M nitric acid, and finally the cobalt complex with 1M sulphuric acid, and the absorbance measured at 500 nm. 

The alkynyl reagent 9 was recently introduced for the dia stereoselective synthesis of tertiary propargylic alcohols144. 9 can be prepared as a solid 1 1 complex with tetrahydrofuran by treatment of 9-methoxy-9-borabicyclo[3.3.1]nonane with (trimethylsilylethynyl)lithium, followed by addition of boron trifluoride-diethyl ether complex. The nucleophilic addition of reagent 9 to (R)-2-methoxy-2-methylhexanal (10) afforded a mixture of the diastereomers 11 with a considerable preference to the nonchelation-controlled (3S,4R)-isomer144. 

The same group198 characterized the complexes of methyltin halides with dibenzyl, diethyl and methyl benzyl sulphoxides. R3SnCl forms complexes with one and R2SnCl2 with two donor molecules, and trigonal bipyramidal and octahedral structures, respectively, were suggested for these complexes as shown in Scheme 16. 

Diethyl arylphosphonates were synthesized by reactions of diethyl phosphonate with aryl iodides or bromides containing electron-donor or electron-acceptor substituents in the aromatic ring in aqueous MeCN or neat H2O in the presence of Pd complexes with water-soluble ligands.34 For example, MeCN/H20 (1 mL), PhBr (8.2 mmol), and Ph2P(C6H4S03Na-m) (approximately 0.4 mmol) were successively... 

Germenes readily form complexes with such Lewis bases as diethyl ether,11,51 tetrahydrofuran,52 and triethylamine.51 The germanimine18 and... 

Bis(trimethylsilyl)arsine reacts with diethyl- or dimethylzinc to form different arsenide complexes with the structure dependent on the steric demands of the alkyl group. In the presence of both methyl and ethyl groups alkylzinc bis(trimethylsilylarsenide) forms which has a trimeric solid state structure (37) with a six-membered Zn3As3 and Zn-As distances with an average of 2.48 A.322... 

There are a reasonable number of structurally characterized zinc compounds with bound THF molecules. For example, a six-coordinate zinc porphyrin complex with axial THF donors and a four-coordinate zinc center with two THF ligands and two phenolate ligands.341,357 Although less common there are other structural examples of ether solvents, such as diethyl ether, coordinated.358 The X-ray structure of zinc chloride with 1,4-dioxane ligands shows a monomeric four-coordinate zinc center with two 1,4-dioxane ligands.359... 

Trimethylindium and other lower-alkyl derivatives ignite in air [1], including the 2 1 complex with diethyl ether [2],... 

Contact with acids liberates the solid complex ferrocyanic acid which is endothermic (AH°f (aq) +534.7 kJ/mol, 2.48 kJ/g), and forms complexes with diethyl ether etc. 

The two component form an addition complex with diethyl ether, which exploded violently after partial desiccation an ether-free complex is also unstable. 

A charge-transfer complex of diethyl chlorophosphate with DMF as the one-carbon source effects the cyclization of thiohydrazides into thiadiazoles 142 (Equation 50) <2004S17>. 

---