1.5- Diene oxidative cyclization

Pd-cataly2ed reactions of butadiene are different from those catalyzed by other transition metal complexes. Unlike Ni(0) catalysts, neither the well known cyclodimerization nor cyclotrimerization to form COD or CDT[1,2] takes place with Pd(0) catalysts. Pd(0) complexes catalyze two important reactions of conjugated dienes[3,4]. The first type is linear dimerization. The most characteristic and useful reaction of butadiene catalyzed by Pd(0) is dimerization with incorporation of nucleophiles. The bis-rr-allylpalladium complex 3 is believed to be an intermediate of 1,3,7-octatriene (7j and telomers 5 and 6[5,6]. The complex 3 is the resonance form of 2,5-divinylpalladacyclopentane (1) and pallada-3,7-cyclononadiene (2) formed by the oxidative cyclization of butadiene. The second reaction characteristic of Pd is the co-cyclization of butadiene with C = 0 bonds of aldehydes[7-9] and CO jlO] and C = N bonds of Schiff bases[ll] and isocyanate[12] to form the six-membered heterocyclic compounds 9 with two vinyl groups. The cyclization is explained by the insertion of these unsaturated bonds into the complex 1 to generate 8 and its reductive elimination to give 9. 

Nickel(O) complexes are extremely effective for the dimerization and oligomerization of conjugated dienes [8,9]. Two molecules of 1,3-butadiene readily undergo oxidative cyclization with a Ni(0) metal to form bis-allylnickel species. Palladium(O) complexes also form bis-allylpalladium species of structural similarity (Scheme 2). The bis-allylpalladium complexes show amphiphilic reactivity and serve as an allyl cation equivalent in the presence of appropriate nucleophiles, and also serve as an allyl anion equivalent in the presence of appropriate electrophiles. Characteristically, the bis-allylnickel species is known to date only as a nucleophile toward carbonyl compounds (Eq. 1) [10,11],... 

In the presence of an imidazolium salt and a base, oxidative cyclization of a Ni(0) species upon the diene and an aldehyde takes place first and forms an oxanickellacycle 25, which equilibrates with a seven-membered oxanickella-cycle 26, naturally possessing a cis double bond. cr-Bond metathesis through 26 with hydrosilane affords (Z)-allylsilane (Z)-23. The role of NHC ligand (AT-heterocyclic carbene, generated by H+ elimination from imidazolium C2H by a base) is not clear at present a Ni(0)-NHC complex is believed to effectively produce 26. 

The reaction of CO2 with 1,3-butadienes in the presence of Ni catalysts usually gave an isomeric mixture of carboxylic acids 89 and 90 after hydrolysis (Scheme 32).47,48 The oxa-7r-allylnickel complexes 87 and 88 might be the reaction intermediates, which could be formed through oxidative cyclization of Ni(0) with C02 and the dienes. When Me2Zn was used as a transmetallation agent to react with the oxa-7r-allylnickel intermediates under a C02 atmosphere, further carboxylation took place at the 7r-allylnickel unit. Thus, the 1,4-diesters 95 were obtained after acidic hydrolysis and treatment with diazomethane as shown in Scheme 32.47... 

Enyne metathesis is unique and interesting in synthetic organic chemistry. Since it is difficult to control intermolecular enyne metathesis, this reaction is used as intramolecular enyne metathesis. There are two types of enyne metathesis one is caused by [2+2] cycloaddition of a multiple bond and transition metal carbene complex, and the other is an oxidative cyclization reaction caused by low-valent transition metals. In these cases, the alkyli-dene part migrates from alkene to alkyne carbon. Thus, this reaction is called an alkylidene migration reaction or a skeletal reorganization reaction. Many cyclized products having a diene moiety were obtained using intramolecular enyne metathesis. Very recently, intermolecular enyne metathesis has been developed between alkyne and ethylene as novel diene synthesis. 

The reaction mechanism was considered to be oxidative cyclization, and pal-ladacyclopentene 32 was formed. Reductive elimination then occurs to give cyclobutene 33, whose bond isomerization occurs to give diene 28. The insertion of alkyne (DMAD) into the carbon palladium bond of 32 followed by reductive elimination occurs to give [2+2+2] cocyclization product 27. Although the results of the reactions of E- and Z-isomers of 29 with palladium catalyst 26a were accommodated by this pathway, Trost considered the possibility of migration of substituents. Therefore, 13C-labeled substrate 25 13C was used for this reaction. 

The oxidative cyclization of allenyl alcohol 135 with a small excess of dimethyl-dioxirane leads to an intermediate diepoxide that rearranges to hydroxyfuranone 136 in 55% yield (Eq. 13.44) [52]. If the oxidative cyclization is conducted in the presence of 0.5 equiv. of toluenesulfonic acid, the major product is the furanone lacking the a-hydroxy group of 136. Hydroxyfuranones or pyranones are available from the same kinds of reactions of 5-methylhexa-3,4-dien-l-ol. 

A two-step transformation of conjugated dienes into non-conjugated ones was proposed for the synthesis of the difficult to-obtain lapachol (355) (a member of a class of antimalarial agents having an activity against the Walker carcinosarcoma 256) from the more available isolapachol 352183. This method consists in an oxidative cyclization of isolapachol 352 by 2,3-dichloro-5,6-dicyanobenzoquinone (DDQ) to form a mixture of the products 353 and 354 (equation 127). Treatment of this mixture with dilute acid in... 

An alternative method for the oxidative cyclization of the arylamine-substituted tricarbonyl(r -cyclohexa-l,3-diene)iron complex (725) is the iron-mediated arylamine cyclization. Using ferricenium hexafluorophosphate in the presence of sodium carbonate provided hyellazole (245) directly, along with the complex 727, which was also converted to the natural product (599,600) (Scheme 5.71). 

The Cope rearrangement of 24 gives 2,6,10-undecatrienyldimethylamine[28], Sativene (25j[29] and diquinane (26) have been synthesized by applying three different palladium-catalyzed reactions [oxidative cyclization of the 1,5-diene with Pd(OAc)2, intramolecular allylation of a /i-keto ester with allylic carbonate, and oxidation of terminal alkene to methyl ketone] using allyloctadienyl-dimethylamine (24) as a building block[30]. 

A much more useful method for the preparation of a variety of substituted thiophenes and benzo[6]thiophenes in good yield depends on the oxidative cyclization of 1,3-diene-1-thiols (3) to the substituted thiophenes (4). This reaction was first reported (13CB1903) for the oxidation of o-mercaptocinnamic acid (5) to form benzo[6]thiophene (8) in good yield, using an aqueous alkaline solution of potassium ferricyanide. The intermediacy of a sul-fenium ion (6) was suggested, in view of the quantitative loss of carbon dioxide in the final product. 

Permanganese is a common oxidative reagent, the application of which to the asymmetric oxidative cyclization of 1,5-dienes has been reported by Brown (Scheme 3.14). The addition of acetic acid is quite important for the reaction to proceed, and highly functionalized tetrahydrofurans are obtained in a range of 58 to 75% ee, in diastereoselective manner [35]. Another oxidative transformation using KMn04 with a chiral ammonium salt has been investigated. Scheme 3.15 illustrates the asymmetric dihydroxylation of electron-deficient olefins to chiral diols in the... 

Alkyl- or aryl-substituted pyrazole 1-oxides 94 can be obtained in acceptable yields by oxidative cyclization of O-silylated 3-oximimines like 1 -tert-hutyldimethyIsilyloxy-4-methylamino-1 -azab nta-1,3-diene 93 using copper(II) sulfate as the oxidant and pyridine and acetonitrile as the solvent. The oximimines are prepared from 1,3-dicarbonyl compounds 92 in a one-pot process. The method also gives access to 2-alkyl and aryl-pyrazole 1-oxides R=H devoid of substituents at the ring carbon atoms (94 Ri = R2=H) (1995JCS(P1)2773) (Scheme 27). 

Oxidative cyclization is another type of oxidative addition without bond cleavage. Two molecules of ethylene undergo transition metal-catalysed addition. The intermolecular reaction is initiated by 7i-complexation of the two double bonds, followed by cyclization to form the metallacyclopentane 12. This is called oxidative cyclization. The oxidative cyclization of the a,co-diene 13 affords the metallacyclopentane 14, which undergoes further transformations. Similarly, the oxidative cyclization of the a,co-enyne 15 affords the metallacyclopentene 16. Formation of the five-membered ring 18 occurs stepwise (12, 14 and 16 likewise) and can be understood by the formation of the metallacyclopropene or metallacyclopropane 17. Then the insertion of alkyne or alkene to the three-membered ring 17 produces the metallacyclopentadiene or metallacyclopentane 18. 

Ene-type products are obtained by Co- and Fe-catalysed reaction of dienynes. Cocatalysed cyclization of substrate 111 proceeds smoothly with respect to the diene, acetylene and allylic ether moiety to afford 114. In this cyclization, the 7i-allyl complex 112 is formed by insertion of the diene to Co—H, followed by domino insertions of the triple and double bonds to give 113. The final step is the elimination of the /J-alkoxidc group from 113 to form 114 [47], The six-membered ene-type products 117 and 118 are obtained from the reaction of 115 catalysed by an Fe bipyridyl complex. The reaction seems to involve oxidative cyclization to form 116. Subsequent -elimination and reductive elimination provide 117 and 118. As another possibility, insertion of the diene to Fe—H gives a 7i-allyl complex. Then double bond insertion and -elimination should give 117 and 118 [48],... 

The 14-electron species denoted here as Cp2M (M = Ti, Zr), generated from Group 4 metallocenes, mediate useful oxidative cyclizations of dienes 231 [103,104], enynes 233 [105] and diynes 235 [105,106] via the metallacycles 232, 234 and 236. These metallacycles are useful intermediates, which are hydrogenolysed, carbonylated, halogenated, attacked by electrophiles and converted to functionalized cyclic compounds such as 238 and 239 [107],... 

The 1,6-diene 254 was prepared from (+)-carvone (253). Its oxidative cyclization affords the zirconacycle 255, and its carbonylation, followed by treatment with iodine and HC1, gave the tricyclic ketone 256 [113]. The alkaloid (—)-dendrobine (257) was synthesized from 256. 

Some 1,6- and 1,7-enynes undergo interesting Pd, Pt and Ru-catalysed cyclizations, which are regarded as Alder-ene reaction and metathesis. These reactions offer a useful method for the construction of polycyclic compounds [132]. These cyclizations can be understood by the following two mechanisms as shown by Scheme 7.3. As the first possibility, the oxidative cyclization of 1,6-enyne 320 generates the palladacy-clopentene 321. Elimination of two different /1-hydrogens from 321 yields either 322 or 323, which undergoes reductive elimination to produce the 1,4-diene 324 as the Alder-ene product, and the 1,3-diene 325 [133]. Of course, the 1,4-diene is the expected product of the thermal ene reaction. 

The mechanism of the homocoupling of dienes is one of the representative reactions proceeding through a n-allylruthenium intermediate. Indeed, a bis 7r-allylruthenium complex was produced by oxidative cyclization of two dienes and the coupling of the terminal carbon atoms led to a cationic (diene) (allyl)hydridoruthenium species. 

Grigg et al. also introduced another Heck-type reaction. 2,6-Dibromo-hepta-1,6-dienes 80 cyclize to the same products 83 (n = 5) as do 2-bromo-1,6-dienes 78 (n = 5) when treated with the usual precatalyst mixture, yet containing a stoichiometric amount of triphenylphosphine [63,64], In this case, palladium dibromide rather than hydridopalladium bromide is eliminated in the final step of the cross-coupling reaction, and the palladium(II) salt is reduced by the phosphine to regenerate the reactive palladium(O) species. Completely selective exo-trig cyclizations occur in these examples, however, the respective cyclohexane derivatives with n = 6 are formed in poor yields. Additionally, it is sometimes difficult to separate the product from the phosphine oxide after aqueous work-up. This latter difficulty was circum-... 

Another way in which tetrahydrofuran frameworks can be constructed is by employing oxidative cyclization of 1,5-dienes <070BC1605>, and an example is shown in the following scheme <07S2751>. 

---